Easy bolt pull

[TheYomado]

im 12 years old so if i upgrading a bar 10 with an m170 spring would i be able to pull it back?

[nickswimsfast]

@TheYomado I wouldn't recommend it, not only is it hard on your gun, it would be very difficult, for you to pull back. You might be able to run the M150 spring.

[maxrylluc]

nice advice....thanx

[sung715]

Thanks for the helpful tips :)

[Ultim8Soldier]

at minimum you need a zero trigger. anything over 130 will destroy your trigger sears.

[MartiniWinni]

If i get this spring for my BAR 10, do i have to buy all the reinforced parts too? and what Gram bbs do i have to use if i do get the spring and the parts? sorry for all the questions

[nitromehane189]

you have a lot of vsr-10's...

[ClapMeDown]

I love Vsr's so much, mine has a 170 spring in and i know what you mean with the cocking. ive tried your technique and its helped alot the only thing is my rifle has alot of forward resistence which is even more annoying than the pulling resistence, any tips on how i can cut this down would be great. awsome vid man, thumbs up

[nitromehane189]

@ClapMeDown the forward resistance is due to the 45 degree sear system you use. the 45 by nature was designed for a light trigger pull, and wasnt a problem in japan due to FPS restrictions. once you move up spring ratings, the sear system will force the piston and spring guide up, causing lots of friction. buy a 90 degree system and you will not have that problem

[gaspedalpump]

Poor dry fired VSR :(

[chich311]

@gaspedalpump Doesn't hurt that gun with the upgraded parts, and the .36 gram bb which gets fired every day through isn't that much different from not shooting it.

[1H1TSN1P3R]

how come u hav so many bar 10s?

[kevin71127]

Damn!! look at that paint job!

[PinoyPogiman]

should the cocking bolt be on the right side of guns?

i mean, im not in the army, but they did say not to release ur gun hand to do anything, let ur left hand do the job such as reloading/holding/scope adjusting/etc

but is that okay, does the function/design irregulate the rules of military shootng techniques?

[0adireita]

hahaha porn power!

[kiusthugs]

That guy looked like he copied those techniques from the computer at most parts when he looks to the side. But probably he was checking the questions

[nickswimsfast]

@kiusthugs I was indeed looking at my computer. It had a rough outline with key points, to make sure i didn't ramble on. There's nothing worse than a long video with no point.

[assburgers95]

you really love the vsr 10 huh?

yeah so do i, the best one is right the one you shown, anyway i'm subscribing right now!

[assburgers95]

i faved the video because i love you guns!

[BoostingPolice]

1:35 he says porn power hahahahahahahhahahahahhahahah~­~~!!!!!!!!!!!!!!!!!hhahahahaha­hhahahahahahahahahahhahhhhahah­ahahhahahahahahahhahahahahhaha­hahhahahhahahyhahahahhyahahhah­ahahhaha

[nickswimsfast]

@BoostingPolice lol nice. Rofl. Just for clarification i was saying "pulling power." But yes it definitely sounds like that.

[RiSkD3vo]

who ever needs help on pulling the bolt lever back on a sniper is a fucking retard..

[crazicaddstudios]

no offence but i seen this vid on the side bar and i wandered why you would show people how to loa abolt action rifle but nice camo

[blingblingjon34]

at 1:35 did he say porn power

[AirsoftersAnonymous]

@blingblingjon34 pulling power

[pararescue1324]

nice camo u should make a vid on how to do it

[1H1TSN1P3R]

what upgrade parts you have in there. Edgi and if you upgrade with an m170 is bolt hard to pull back for 13 year old

[IEsorry]

@1H1TSN1P3R I can pull my vsr with a 170 in it with my ring finger..Im 14 so I think youll be fine

[KKM13200]

where can i get the high-cap mag for my bar10?

[caltake1]

Make it yourself.

Take a regular hi cap and a Bar mag,cut the outer shell of the bar mag so that all that there is is the part that fits into the gun, then attach the hi-cap.

I am paraphrasing, there is a decent guide on ASR about it.

[ultimatevideowatcher]

Whats the range of that gun with that M170?

[xxABIGBOYxx]

my bolt is really hard to push forward and most the time it gets stuck

[tdoolin18]

lube your bolt

[PoppingSanta]

No, don't give advise to people if you dont know anything about it.

[PoppingSanta]

No you have screwed your screws (HAHAHAHAHA xD don't really know how to say it right) too tight. Just dont screw em so hard and it will work fine.

[haruko619619]

is that custom paint, or did it come like that?

btw do you know where I could find a buttstock mag pouch that fits the bar10?

Tty soon,

Jake

[hellknight2000yahooc]

interesting information thank you for that :)

[theonlyasiansniper]

what kind of silencer is that?

[vwrFEW]

i believe its a friction fit, nothing more than some 1 inch pvc pipe

[jordanr1504]

what fps do u get from a brand new m170 spring?

my site limit is 500 for snipers so i was gnna get a m150 but i dnno if it will be high enough

[AgentLeonGlock19]

for the jg bar 1o the m170 spring will get close to 600

[vwrFEW]

its a 550 fps spring without a tightbore

[AgentLeonGlock19]

ok thanks

[vwrFEW]

a tightbore and an m150 will get you over 500. and remamber fps aint everything. my bar-10 could probably out shoot your gun with its m130 when you havean m150. also the fps limit aint a goal dont upgrade just to be barely legal

[Sycorexxx]

Wich one do you prefer? the JG bar 10-G of the scope version? Same price? Only the G- has illuminated scope...

[vwrFEW]

actually they both have the same scope if you buy off airsoft gi. He just put a diff scope on

[Oxstayne]

lol nickswimsfast thats something someone would use in Halo xD

[PureItalia23]

nice paint job mind making a vid showing me how you did it thanks

[jordanr1504]

i think thats it may be a gun sock, not paint

[iEnjoi4Life]

lol nice fender!

[sixeskid]

looks more like a squier.

[s4iko1337]

your camera has pixelfailure :)

but nice guide :D

[painfull94]

what fps dos that gun make and can i just stick a huge aeg tight bore in there i was thinky a 650mm tight bore

on a jg bar10

[Vaetok]

Good guide and great looking rifle!