PLEASE CAN ANYBODY HELP ME i have the same problem with my truck but my doesn't say to lean it say to reach i have a little bit of black smoke from the exhaust !!!!!!
wow your videos are the only ones i refer too, your like a encyclopedia of the auto-mechanic answers, keep up the good work, i just bought a tool from your link, i remember you saying it helps you continue to keep making these videos, so i'll be ordering alot more for sure/ plus you already show us how to use them keep up the great videos dwayne
The new lower intake gaskets are green from GM. Have not seen aftermarket yet. Those old ones had some miles. Fuel trim would have pointed to this too.
can oxygen sensors triger this codes.. i have 07 avalanche new body style.. check intake leaks and replaced maf sensor.. fuel pressure is at 60.. also good .. now im down to think its oxygen sensors.... any help?
I was wondering if there is some "poor man smoke machine" schematics, because I can't afford spending thousands of dollars on one. I googled a lot but didn't find anything reliable.
you can use propane or carb cleaner ( carb cleaner is less safe since it coats surfaces and could ignite) however you just spray alittle around area's that could be pulling in outside air (intake area's, vaccum lines, etc) until the engine revs.. once you get it reving from spraying in one spot off and on you know where your leak is. i think "realfixesrealfast" have a video on using propane to find a leak. Also "Ericthecarguy"channel has one as well on how to use carb cleaner method. cheers
Nice video, you work methodically. Please don't forget us shade tree guys, who probably won't have that fancy smoke machine. How would a spray can of carb cleaner worked?
If a leak is very bad the engine idle will change when you spray crab clean in areas where it is leaking vacuum. sometimes a leak that will cause a lean code on a newer car with a mass airflow sensor is not big enough to cause a idle change when you spray added fuel around the air leak though.
PLEASE CAN ANYBODY HELP ME i have the same problem with my truck but my doesn't say to lean it say to reach i have a little bit of black smoke from the exhaust !!!!!!
TheSilverboy2011 3 weeks ago
@TheSilverboy2011 CHECK FOR A LEAKING FUEL PRESSURE REGULATOR OR A GROUNDED FUEL INJECTOR CIRCUIT,,,,,
silkylove1000 14 hours ago
How much did that process cost in terms of parts and labor?
samsungpdp 3 weeks ago
wow your videos are the only ones i refer too, your like a encyclopedia of the auto-mechanic answers, keep up the good work, i just bought a tool from your link, i remember you saying it helps you continue to keep making these videos, so i'll be ordering alot more for sure/ plus you already show us how to use them keep up the great videos dwayne
ironman6669able 2 months ago in playlist Uploaded videos
Very nice, description and analysis.
wiredawg 3 months ago
super helpful. Thanks so much!
yipyipnopehmm 6 months ago
WHERE IS YOU SHOP LOCATED?
fm3081 6 months ago
how much does that service costs? My 2002 silverado 1500 has the same codes problem PO171 AND PO174.
fm3081 6 months ago
The new lower intake gaskets are green from GM. Have not seen aftermarket yet. Those old ones had some miles. Fuel trim would have pointed to this too.
Mutleytech 7 months ago
can oxygen sensors triger this codes.. i have 07 avalanche new body style.. check intake leaks and replaced maf sensor.. fuel pressure is at 60.. also good .. now im down to think its oxygen sensors.... any help?
rulas702 11 months ago
This has been flagged as spam show
po174 explorer 200
camarillo281 1 year ago
po174 explorer
camarillo281 1 year ago
Does your smoke machine use shop air as the supply or does it require an external Nitrogen bottle?
RJC3po 1 year ago
Man I wish I had a nickel for every time I saw one of those Gen III motors leak intake gaskets.
dmorley100 1 year ago
Great video. Is it possible rent one of these machines?
bhstone1 1 year ago
i cant imagine y the intake would smash like that unless put on wrong or bad product
kdknitro 1 year ago
i love your videos, every time i watch one i learn something new.
AnUglyAmerican 1 year ago 8
I was wondering if there is some "poor man smoke machine" schematics, because I can't afford spending thousands of dollars on one. I googled a lot but didn't find anything reliable.
masster64 1 year ago
@masster64 Homemade smoke machine: ww(DOT)chevytalk(DOT)org/fusionbb/showtopic.php?tid/223962/
and
[without(ww)s979.photobucket(DOT)com/home/glasses97
MikesFitnessGoals 1 year ago
@MikesFitnessGoals that second address starts with s979.. after the h.tt.p.//
MikesFitnessGoals 1 year ago
@MikesFitnessGoals
thanks. I really appreciate it.
not sure about the second link what is. please post it in clear.
masster64 1 year ago
@masster64 h..tt..p://s979(DOT)photobucket(DOT)com/home/glasses97
remove the .. from the h..tt..p
MikesFitnessGoals 1 year ago
you can use propane or carb cleaner ( carb cleaner is less safe since it coats surfaces and could ignite) however you just spray alittle around area's that could be pulling in outside air (intake area's, vaccum lines, etc) until the engine revs.. once you get it reving from spraying in one spot off and on you know where your leak is. i think "realfixesrealfast" have a video on using propane to find a leak. Also "Ericthecarguy"channel has one as well on how to use carb cleaner method. cheers
Diesel1Dee 1 year ago
Nice video, you work methodically. Please don't forget us shade tree guys, who probably won't have that fancy smoke machine. How would a spray can of carb cleaner worked?
binnsh 1 year ago
@binnsh
If a leak is very bad the engine idle will change when you spray crab clean in areas where it is leaking vacuum. sometimes a leak that will cause a lean code on a newer car with a mass airflow sensor is not big enough to cause a idle change when you spray added fuel around the air leak though.
Jasons1487 1 year ago
Is it normal for the intake gasket to ware out like that or is it a symptom of some other part failing causing the engine to run hotter?
moofushu 1 year ago
"Thumbs up" on that glove trick, have to "hand" it to you, good vid!
Moosepiesandwich 1 year ago
Well done!
Where can i buy one of these smokers?
Can you also do cooling systems with this?
Thanks
-Tim
TRcustomengineering 1 year ago
5:37 "So, all the evidence is LETTUCE to the problem." Hahaha.
sweetlikeADAM 1 year ago 4
@sweetlikeADAM Dumbass.
AutoTechHector 1 year ago
@AutoTechHectory Your ass is dumb, dumb ass.
sweetlikeADAM 1 year ago
Nice video
DrJohnBecker 1 year ago
Thanks for another great video!
MrSlasher80 1 year ago
LOL, I guess incense wouldn't work? Great vid!
studpuppy69 1 year ago 2
Every time I watch your videos I learn something new. Thanks
perrokonan 1 year ago
great i wish i could one day be as good as you guys thanks for ur videos...
rodrigoelgu 1 year ago
very informative. iv'e never even heard of smoke testing. thanks for the info
jsnyara 1 year ago
Wow, thats alot better than spaying the engine with carb cleaner and waiting to here it rev up to find the leak. Are those smoke machines expensive?
losercomet 1 year ago
@losercomet A good one is about $1000 to $2000 Doller's!
DAQUAN88 1 year ago