AGM M4 GBB VS WA M4 GBB Customs- CRW Channel

[dannybee444]

thats a magpul UBR stock, but they have broken it somhow.

[halowizzerd]

gay,its airsoft

[mipyman2]

@halowizzerd your gay.

[RattlesnakeAirsoft]

werecan u buy the tan one? and how much does it cost? pleez anser soon

[MACER545]

@RattlesnakeAirsoft You customize it yourself

[TheAirsoftUSArmy]

what stock is on the WA m4?

[The1wHoOwnSu08]

@TheAirsoftUSArmy i believe thats a magpul URB stock

[chenlixingjstz]

best love GBB

[chenlixingjstz]

this is so cool video i love M4

[123adig123]

lol I have also a GBB but not this nice mist

[mocatz187]

The rof stayed consistent till the end of the mag on the AGM but the WA sounds like it's tuckering out. Does the lower output on the AGM mag prevent premature cool down? The AGM seems like it could be a fierce skirmish gun with a rof like that.

[Dusan12]

Do not buy an AGM, I'we just problems with it. Allready 2 times back in the shop with complains. Leaking mags, new ones fro the box... Jamming in single shot mod, followed with gas leak. My HiCapa 5.11 1911 has longer range, accuracy and stronger punch tha the AGM M4. I will get it back to the store and have my money back. My personal opinion, hands away from the AGM m4

[kungenchrille]

@LsGvTriLogY

probably Ehobbyasia. they have everything.

[grodisac]

your toyz is cheat

[Livemovieproductions]

what bolt is on the WA?

[RoadHawks17]

great guns. one thing though. fire rate on full auto and cycle rate overall seems faster on the stock m4. thought vid would be about making the modded m4 look better. other than tht, great vid

[riceboy43]

wait so which one is the AGM and the WA????? which one do you prefer????

[blaow265]

did you customize any parts internally in wa m4

[94STFU]

what the temperature change while shooting a gbbr?

[chase1bf]

I personally own a WA M4 and I feel its just much higher quality than the AGM, but everyone is entitled to their own opinion.

[bsparza]

im going to buy an agm m4, my question is this agm can use wa or we mags? thanks

[crwairsofthk]

@bsparza

WA mag, Prowin, G&P also ok

[BensHerpingChannel]

@crwairsofthk WA is the GBB G&Ps GBB division.

[Livemovieproductions]

which bolt is that? on the WA M4?

[brassnautilus]

shouldn't use your 5DII like a camcorder. bad for the cmos.

[Bullet4MyEnemy]

I've been tempted to buy the AGM for ages but all the videos I can find are basically full of complaints about them and I have this annoying tendancy to only believe the bad things people say...

Has anyone had one, or known someone who's had one that can tell me they're good and worth the money, or should I just save up a bit and find somewhere to buy an Inokatsu?

[cokeman2423]

thumbs up if you haz real one? <-- LOL

[penguingt]

im looking to buy a gas m4 but i cant decide on a brand, i want a mid range price , but one that im not going to need to replace parts as soon as i get it, can u guys help?

[forkball1968]

@1:00 don't blame the video on your camera dude... the 5DmkII is AMAZING at video if you know how to use it correctly.

[Bekhang95]

what is the name of that tan gun?

[BillyLikesMetal]

So the AGM is better because you don't need to alter most of the parts for it to actually work?

My question now, is AGM or WE?

[ericisaphony]

goddamn I hate airsoft videos...

[airsoftowns42]

@ericisaphony THEN WHY IN THE HELL DO YOU LOOK FOR THEM AND WATCH THEM. STOP TROLLING

[Walkman1OldSchool1]

GBB or AEG as my first gun?

[dasurfer0900]

@Walkman1OldSchool1 dont get a gbb there to expensive and a pain in the ass aeg is the way to go

[TheFinalFrame]

@Walkman1OldSchool1 AEG pm me if u need any help

I have worked with/for multiple airsoft companies

[MrMunklez]

PLease help me? Haw did you get the magpul pts ubr stock on the m4. I kan only find the ubr for AEGs?

[DnBVooDooDNA]

@MrMunklez the real steel......... duh

[POPJack1717]

WHICH IS BETTER?????? Like which one will last longer, which one isn't 'cheaply' made. which shoots harder?? which shoots more accurate?? which is just the overall better buy????????????????

[TheEmelianenkoFedor]

WAT IS THAT TAN M4 CALLED I WOULD BUY IT FROM YOU GUYS.

[crwairsofthk]

@TheEmelianenkoFedor

It is a customs by us. it is not cheap

[marineman825]

can u use regular body meant for aeg on a gbb?

[crwairsofthk]

@marineman825 No

[BensHerpingChannel]

@marineman825 You could by a madbull gas adapter for an AEG

[netfreak91]

les recoil than a we m4

[crwairsofthk]

@netfreak91

No we just tune it down

[BensHerpingChannel]

@crwairsofthk WHY!

[POPJack1717]

WHICH IS BEtTER GBB or AEG airsoft guns???????????



[AdRiiNaLinFingerboar]

@POPJack1717 gbb is better but it will cost more money then an aeg but u dont have to worry about the battery tho so i would pick a gbb cuz i have a aeg and a gbb i alwas us a gbb because it feels more realistic feel to a real gun then u buy a hard buffer tube so it has hard recoil and its so alsome so buy a gbb its money worth

[silvianna51]

What's wrong with your dslr... I'm using the 5D mkII for cinema purpose !

[D00d107]

is it possible for you guys to do a V.S. with the AGM and the JG gas blowbacks?

[Kunibelt]

is the M4 GBB available on website?

[thedrummiester]

@diagn0stik yes but you dont want to really use full auto on a gbb anyway. unless its cqb where you can just go to the safe zone and load them all up again

[GunniTheGunman]

Here in Germany, AGM M4 GBBs are not rare.

And i love the prohibition of full auto mode here.

Nice guns :)

But I think, WA is too expansive.

[thedrummiester]

@GunniTheGunman yea i agree the wa is expensive. but it is very well built and the agm is crap. i say the G&P m4's are the best because they already have G&P upgradede parts in them, but its the WA system. and if you have lots of money get the inukatsu m4 mtw. 

[hierate]

I find it funny that the only way to make an already very expensive WA GBB skimishable is to put another $600-1200 into it.

[thedrummiester]

@hierate what are you talking about. its skirmishable out of the box. the difference between it and the agm is. 1 the agm is so bad it can't take 134a. this is because it the peoples republic of china they dont have good quality control. so they didnt design the lower reciver corectly and the bolt gets stuck on the hammer and the stock tube. so if you used 134a it would get stuck and jam the gun until you used the foward assist. 2 the hopup doesnt work, 3 the metal on the gun is shitty pot metal

[thedrummiester]

@hierate also the people who put $600 into a WA, there gun will last them a very very long time. if you just buy an agm. it will break after about 500 shots. which if you think about it thats only about 2 or 3 skirmishes before its un useable. so dont bash the WA. its high quality and is built to spec. also these companies know your going to upgrade anyway

[400adidas]

@thedrummiester by searching alot on the internet about buying a good airsoft i decided that i whanted to but one of top of the line so i decided to go with an ICS m4

already put 7000 rnds in plinking :)

[dogboy0912]

casv makes everything look better.

[JSTravis112]

Do you guys ever get more in stock or was the last one the last stock of it?

[Quartz91]

You do know how cool that tan'd gun would look with a tan'd eotech 553, right :)

[haggman7]

Love the guns, but holy crap, that camera is insanely nice!

[airsoftboy1313]

Are WA parts compatible with the AGM rifle like the bolt, charging handle, etc?

[crwairsofthk]

AGM M4 GBB BACK IN STOCK NOW!!!!We managed to find the last stock of AGM. Please be quick before it sold out

[YunGKryptO]

@crwairsofthk where can i buy?????????

[darkjj1995]

is that the scar or the acr stcok on the Custom rifle if not it sure does look like it : P

[ect301fps]

@darkjj1995 It's a magpul stock.

[Casper48022]

I dont see the point in getting yourself shot by a cop to play with airsoft guns....

[DORC101]

Where can i get this sexy thing? (that ships to canada)

[MAGPULxxDYNAMICS]

AN AR15 is the real name for the M4

[WillSnipe4Tacos]

@MAGPULxxDYNAMICS Um, thats the civillian ver

[striker6296]

sweet m4!!

[1SWATPAINTBALLTEAM0]

where can u get one of those

[motocrossking731]

whats the tan gun? the WA? i like that thing, its sickkk!!!

[packgen]

yup, its the WA M4

[DKruns]

it is just a m4 with voltr upper/lover reciever, voltr casv, magpul ubr stock, magpul grip and trigger guard

[Darkstar2520]

where did u buy the grip from?

[mcskatin]

to fix the bolt locking on the agm, there is a tiny switch on top of magazine for it.

[AirsoftBackUp]

well thats the option the agm deosnt have a good bolt catch ether but its cheep to upgrade

[mcskatin]

how long should i hold the green gas on the agm magazine.

[mcskatin]

i have the agm gbb m4 gun and the bbs fly everywhere when i shoot. they curve so much. What gas should i use? how should i do the hopup? any tips? magazine fault? please answer

[dongochu]

the agm m4 has no hop up and the rails on the RIS version wobble. Heard it breaks fast too cuz of the low quality parts. The parts are not replaceable, because AGM does not sell spare parts. But its a good deal for only only $100.

[mcskatin]

@dongochu it has a hopup. its behind the heat shields.

[mcskatin]

which one is better? and how much is the WA one??

[MrMopar1992]

Your WA M$ GBB puts my G&G M4 to shame. I want yours so badly.

[theLEMONcitrus]

ill promise your gun is better then wa m4! but it wont kick... still gg will be better for skirmishing...

[95uper]

how much was thatt dude....i gotta get me one

[airbornghost123]

agm gas m4 is like the cheapest gbb m4 on the market i reccommend getting a GP woc m4 its better

[TinkyHitman]

yeah but it is $500 more.

[Shufflingboyify]

if u have to change all parts in a wa m4 gbb... why do u buy it then ?

[oscarmiar]

@Shufflingboyify That was the only GBB rifle available at the time.

[PolishSniper96]

WOW.! you have a lot of money. it's  one of the most expensive rifles, isn't it?

[leonkennedy74]

So overall, which is the more cost effective purchase when you look at longevity, cost, etc?

[etekegoboy098]

on the agm m4 after every mag do you have to put more gas in it after your out off bbs or can u just refill the mag

[SWATteam200]

does anyone know how long to charge the agm m4 magazine for with top gas?????

[arshavin990]

naja das gefelt mir nicht

[pyramidheadthingy]

is that the CNC milled upper and lower?

or the cheaper aluminum one?

id love the CNC milled, but its the cost of a whole other gun :/

[garrettbosien10]

does the agm m4 have some kick like just enough to feel it or should i go with the WE gbb scar

[ArexAirsoft]

if I were u I would go with the WE SCAR, it might be a bit more expensive than the AGM m4 but trust me, its worth it. The AGM M4A1 seem like a great deal with its alloy internals and full metal body compared to the much more expensive than the WA M4, and in order to get the AGM to preform up to standard and at an OK reliablity you would be spending 200~300 USD but the WE SCAR is very reliable out of the box (some parts should be upgraded) but otherwise the WE SCAR is better in value

[ojoj626]

agm has the kick of a 22.

[Livemovieproductions]

that WA M4 is sexy

[911airsoftdude]

@Livemovieproductions yea but to bad its illegal in the US

[Itachi1024]

are GBB's good? i mean they sound good. but like i live in hong kong and lowest temperatures are like 10 degrees i think would gbb's work?

[maximevhw]

wa sucks agm best

[427Thunder]

WA is one of the original GBBR manufacturer. So in all likely hood, the guns that you hate helped influence the design of the AGM,

[parker1707]

u suck AGM wont last long bec they use cheap metal

[SlLHOUETTE]

......... Only cheap metal they use is on the Externals. WA makes there weapons out of plastic Unless it has G&P upgrades.

[skarpskyttar]

You sir are WRONG. WA don't use plastic on the body the body on the WA m4 is much better and sturdier than plastic, hell its even better then some of the metal bodys i've tried on aegs.. it's some sort of polymer mix they used.

[leonkennedy74]

Regardless, it's not metal though.Most people replace them because they just can't stand up to the abuse that you put through them in one season. Not to mention that the aftermarket parts available for them are almost exlcusively metal.

[THEDOMINICROGERS]

i get a custom wa m4 soon with systema parts

[killer4uman]

systema doesnt make parts for a wa m4... fail they do aegs not gbbr

[THEDOMINICROGERS]

yh but the thread fits the wa i have seen it on there i have the picture to prove it but tht is the only compatible part

[CRC1770]

What rail system is that on the WA M4 ?

[The151PIRU]

RIS i think

[sniperwarrior23]

Its a RS Vltor CASV $270~

[DeathFisk]

what bolt are you using on the wa m4? sounds a bit heavy

[crwairsofthk]

it is written on the video

[limeheadrickey]

so is the agm good and is gbb better or worse than electric in performance

[DeathFisk]

electric is usualy better in terms of performance. a GBB, though, is more fun to shoot and to skirmish with :)

[crwairsofthk]

yes agree

[Tommc18]

can you get his in the UK without Ukara license

[KaosKaptainKenta]

Does anyone know what type of iron sight the back sight was for the tan M4?

[Covertmaddroxx1]

how much does it cost for a new hop-up?

[LeDZeppeliNFreaK1968]

$18.99.

[Covertmaddroxx1]

thanks, do you know where I could find one? because I cant seem to find a single one any where all i see is hop up chamber's and shit

[ryan52620]

ehobbyasia has tons of options for GBB

[BaCCon8ER08]

yea they have this gun for $106 but they shipping and handling is mad expencive

[Gravexero]

what top rail is that? the one streching from the rear sight to the front sight?

[bloodangelusn]

that is a CASV from VLTOR

[TheFatAssCat]

Are the magazenes interchangable? Because you said the WE mags are more stable.. Hope fully they work for both?

[crwairsofthk]

Please note WE is a very different system. Nothing internal parts is interchangeable.

[TheFatAssCat]

But i was hopeing the mags are interchangible? (My freind is selling his WE and has extra mags- Also note I dont have an AGM yet so I cant test them)

And yes, I know they have different internals. The only internal thing im going to mess with anyway is a new hop-up assembly...

[untulisc]

ok what if you use GHK mag... Will that have a negative effect on the system??? cuz I wanna use the top gas

[WillSnipe4Tacos]

The Custom M4 looks like an S-System and a SCAR had a bastard child.

[AtlantiXYL]

where do you get steel bolt?

[SupraTompan]

RAtech.

[shaunzutube]

can agm use green gas?

[LieutenantScout]

Of course.

[driftinsti]

i know the second gen mags do. The first gen ones may need new O-rings to run on green gas. Hope that answers your question :P

[alteclansig]

you should do a agm vs we m4 and can acm light version mags take green gas

[driftinsti]

that wouldn't make much sense. The WE has a completely different gas system than the AGM.

[alteclansig]

just like wich system would be more reliable

[airsoftboy1313]

so ive heard that the agm should only be fired with top gas, and not green because the internals cant take it, is this true

[paulwes1983]

Most of the internals of the gun can take green gas, but you run a very good chance of cracking the bolt because it's made of plastic on AGMs. If you want to use green gas then you'll have to upgrade the seals on the mag because they blow the second you put green gas in them. They say they can take it, but I still have yet to see a stock AGM mag that can.

All in all, AGMs are still cheaper once all the upgrades are done, but you will need upgrades, green gas or not.

[PrimoVids]

That's my problem; I used propane (with silicon) and the seal blew. How can I fix it?

[paulwes1983]

You're going to have to get new o-rings for the outlet valve...if that's where it blew. Basically you'll need to take the mag apart and replace that seal and you should be back in business.

Good luck

[PrimoVids]

I've disassembled it already, I'm not going to bother. I'm already expecting a new GHK mag in the mail. This one is to test. If it works good, I'm gonna get at least three more.

[airsoftmaster276]

Top gas is green gas, it's only meant for green gas/ propane.

[Chan1254]

is there a way to fix the selector switch so it stays still? and is the agm m4 a good gun?

[crwairsofthk]

AGM has fix the problem now.

[xxthehuskycaboosexx]

i got the ris version and the upper reciver threds are messed up now the barrol wont stay on for more then a few shots i found a we-tech upper reciver could you guys tell me if that will work?

[RedneckMarine0110]

i dont have the western arms but i do have the AGM BB and i love it

[ARX7ARBALESTZ7]

where did you get your AGM from? i can only find online sites outside the u.s. that sell it and after shipping it's like $200 something :P

[RedneckMarine0110]

i have a dealer in ohio that orders them for me and then i pay him

[ARX7ARBALESTZ7]

ooh cool, lucky i wonder if i can do that

[RedneckMarine0110]

you gotta have connections.... hes been a friend of mine for a long time so he became my dealer.. he buys the guns from the websites like, airsoftgi, evike, airsoft extreme, airsoft arms, etc and then sells them to me for the price he wants which is usually lower then the online price

[ARX7ARBALESTZ7]

oh i see, that's cool. you get to save money

[HammerheadWOC]

to bad agm is not actually compatible with wa and G&P parts. thefore its a great gun to buy to see if you want to own a REAL awesome gbb

[HammerheadWOC]

whereeee did you get all those sweet parts for the wa?? i want that stock and hand grip!!!!

[crwairsofthk]

But it compatible with most of the AEG RIS, RAS, DD rail system, it save you alot of money.

[Shinakumiatsu]

RA Tech sells parts and manufactures them for AGM G&P WE INOKATSU & WA GBBs. so Yes there are parts. Personally I'll go with the AGM GBB.. 125 dollars beats the hell out of 350-1500$

[HammerheadWOC]

sorry to have to contradict you so harshly but your wrong lol the only parts ratech sells that are compatible are the npas and the brand new magic pin. Go watch the red wolf review to learn more, the bodies the bolt carrier none accurately fit.

[Shinakumiatsu]

I spoke of RA Tech MAKING parts not interchanging them with each other. I've been keeping up with RA Tech for a while they plan on making their own brand of reinforced parts for each gun. Either way I'd still spend money just on the AGM and not the others...

[HammerheadWOC]

dude awesome but so what? but the time you have upgraded everything to the strength of what the G&P wocs are you would have spent as much. Maybe 100 less and you know i am willing to part with that 100 because my gun has sick ass markings and makes people shake in their boots because it RAPES. You could spend months waiting though thats cool...So now im just waiting for the prowin mags to be released because they are cnced badassness.

[Shinakumiatsu]

Markings? Right..uh..Like people are going to oggle at your gun while you're shooting at them..yeaaah, that's "cool" alright. Besides I was stating simple facts Im not looking to upgrade my gun unless it needs it. It stock is just fine because it functions nicely.

[HammerheadWOC]

thats fairly rude i take great pride in having something that functions perfectly and is aesthetically pleasing. And whatever you say its still just a cheap knock off of real quality. Its only a matter of time before it fails. WA m4s have a very well established line of products upgrades and varieties. Parts will ALWAYS be available for the wa. The same cannot be said for agms.

[UBCSWraith]

Due to the fact that I'm on Team Umbrella, I'm getting custom UBCS trademarks on mine! That'll run me around $40-$60 or so depending on how much laser engravings I really want. If the AGM had trades, they'd be "illegal," and the AGMs would be even harder to get into the US.

[UBCSWraith]

I've learned not to trust redwolf. They want your money, remember that.

Go read the threads on Arnies and you'll see what I mean. Judging from your name it looks like your a G&P WOC owner? They're great guns, and far better than AGMs stock, I'll give you that. But for the price, the AGM with just a few upgrades is quite the competitor.

[HammerheadWOC]

well you should see my beast it now has

prime super light weight bolt

airsoft surgeon 140% recoil spring

buffers

pdi 6.01 inner barrel

prime hop up

G&P 120% hammer spring

G&P heavy recoil no rof decrease spring buffer

thats just internals not to mention my silencer and lights laser and grip and holosight

Its golden lol all i need is the ratech npas and some pro win mags when they come out!!!

[UBCSWraith]

Or you can be like me and pay ~$350-$400 to buy and upgrade an AGM M4 GBB and make it BETTER than a WE, WA, INO, G&P M4s! ;)

[hkseo100]

ummm no?

I just bought the Inokatsu parts for WA M4 (bolt catch, trigger, sear, fire selector, hammer), RA-Tech hop up, steel hopup enclosure, aluminium buffer, anti-rotation links.

they ALL fit.

[HardballPlayerDK]

Excellent Video, Thanks for posting.!

[ninjaman1777]

wow thats a nice gun man...lol WE are to damn expensive man.....agm m4...worth every penny...unlike WE they do the same thing....

[Tron1303]

anyone know how to get a magpul moe pistol grip on a we noveske m4 gbb

[crwairsofthk]

The bolt lock is working now. AGM fixed the problem now.

[cuteshadowKIA]

How do i know if the Problem is fixed on my GBB when i buy one via internet?

Do you recommend it, instead of a 3times more expensive WA,WE?

[iceking123kitty]

i love these videos that crw has goin on. they such good comparisions!!

[kyleryo22]

no no no your video camra is great!