The plans the guys at hho-hybrid . com seem much simpler configuration and are producing great results according to "amazinghybrid" and others. I bought plans for $19.95 and they are totally helping me put it all together!!
I used a 3V switching power supply. The cell is designed with 2 thbes and a 66.5mm outer tube Di and a 60.5mm inner tube Do.Tubes are made of 304SS. It outputs hho 37.5L/H @ 2.5V x 40A=100W
That's quite a lot of gas - can you tell us more about your cell? Construction? Voltage, current, DC or pulsed?. Are you using electrolyte, tap water, distilled? And have you measured the gas output?
A great place for you share your results would be the "Hydroxy" forum at yahoogroups dot com. And thanks!
i love the explosive effect of the lighting!
mastereyeball 2 years ago
This has been flagged as spam show
The plans the guys at hho-hybrid . com seem much simpler configuration and are producing great results according to "amazinghybrid" and others. I bought plans for $19.95 and they are totally helping me put it all together!!
blahvidblah 3 years ago
37.5L/h is only 0.6 liter/minute.
notogas 4 years ago
going 60 mph consuming 30 mpg you only need 2 gph produced. which is about 8l per hour.
magifesq 4 years ago
Going further the stoichiometry of gasoline is 14:1 and hydrogen is 34:1. so you'd need only about 1.6 g of H instead of gas.
magifesq 4 years ago
I used a 3V switching power supply. The cell is designed with 2 thbes and a 66.5mm outer tube Di and a 60.5mm inner tube Do.Tubes are made of 304SS. It outputs hho 37.5L/H @ 2.5V x 40A=100W
EFF=100W/37.5L/H=2.666WH/L
wphuang2005 4 years ago
You have come a long way in the construction of the S-Cell.
Check your messages
Builders Team Network
aka Ironhead
SGiHunter 4 years ago
That's quite a lot of gas - can you tell us more about your cell? Construction? Voltage, current, DC or pulsed?. Are you using electrolyte, tap water, distilled? And have you measured the gas output?
A great place for you share your results would be the "Hydroxy" forum at yahoogroups dot com. And thanks!
markbachelder 4 years ago
In first message everything have been there.KOH was used and adjusted the concentration to reach the point of 2.5V/40A.
wphuang2005 4 years ago
nice keep up the good work
Jameshotguy77 4 years ago