@Twitchster93Thanx, I always thought two tone would look badass, normally with this car it would start right above the bottom of the bottom of the rear window pillars.
@Rafylovepr Not at all, they're very comfortable. I'm 5'10" and still have room to move back if I want. I've had 2 of these cars so far, love every minute driving. Hope to do a v6 swap with this one soon!!
@Rafylovepr you might have already brought one now so grats on your car but honestly the 3ltr camry engines go in with abseloutly no trouble at all, i beleive its just one mount that needs fabin? and if you have an n/a you will need turbo brakes, gearbox and clutch. but other than that the TINY added weight doesnt matter, its not weight with an mr its ballence wich is pretty much 50/50 on this car, adding a bit over the balence point isnt a problem :P almost doublin power/weight ratio anyway ;)
@TheOmegaeyes Either the 3VZFE or the 1MZFE will be going in, either or will make close to 200rwhp which is considerably more then the 130-140 I have now with the stock NA 5SFE. It's a cheaper swap then the 2nd/3rd gen 3SGTE and will be better as far as gas mileage since the car is daily driven. I know a guy that will do it, his work is really clean!
I like the color and I think you did a good job. I will try to get my 91 deuce up once I get the fuel and temp gauges fixed. It's black and I thought about adding 17inch Konig Illusion (Black/White) wheels what do you think?
@Aztech355 Thanks goes to my buddy that did the body/paint work, I used to have Konigs on the first mr2 I had, a '91 turbo pretty much stock. I like Konigs but that's your choice my friend.
About the exhaust, the Berk and SSAutochrome are very simliar, but the SSA tips angle outwards, and the Berk tips will point straight back. I have a Berk on my 93T, and my buddy has a SSA on his 91T.
I like the dual-silencer exhausts. THey have a much lower, mellower bass tone than the raspy single cans (the cheap ones). Some single cans can sound good, but only the expensive ones.
I've been doing some looking around and found that it looks closest to the Japspeed but I think it's an ebay knockoff cause my friend bought everything for it off there. The cut on the tailpipes of the japspeed has an angle and it also has the imprint logo on them.
LOVE the color, and the clean body kit.
adonian 2 months ago
@adonian Thanx!
TheOmegaeyes 2 months ago
clean MR2. I really miss mine...
japcar513 6 months ago
Sweet riceer bro looooool
veatchdave 8 months ago
@veatchdave Glad you like , It's now a 3rd gen JDM turbo swapped 270hp ricer ;-)
TheOmegaeyes 8 months ago 4
@veatchdave
BTW that's a sports car not a ricer sir.
Aztech355 6 months ago
looks really good thinking about making it that orange color on bottom and black a little above the door handle
Twitchster93 1 year ago
@Twitchster93Thanx, I always thought two tone would look badass, normally with this car it would start right above the bottom of the bottom of the rear window pillars.
TheOmegaeyes 1 year ago
@TheOmegaeyes i usually dont like orange but lately for some reason i do and yours looks really good
Twitchster93 1 year ago
Is 6ft too tall too drive one of thease??? I want one
Rafylovepr 1 year ago
@Rafylovepr Not at all, they're very comfortable. I'm 5'10" and still have room to move back if I want. I've had 2 of these cars so far, love every minute driving. Hope to do a v6 swap with this one soon!!
TheOmegaeyes 1 year ago
Oh thanks you've convinced me to buy me an mr2... if i can find one :( haha
I see a lot of youtube videos with camry V6 swaps. But i dont think i recomend that, engine its not the best... What do you have in mind?
Rafylovepr 1 year ago
@Rafylovepr you might have already brought one now so grats on your car but honestly the 3ltr camry engines go in with abseloutly no trouble at all, i beleive its just one mount that needs fabin? and if you have an n/a you will need turbo brakes, gearbox and clutch. but other than that the TINY added weight doesnt matter, its not weight with an mr its ballence wich is pretty much 50/50 on this car, adding a bit over the balence point isnt a problem :P almost doublin power/weight ratio anyway ;)
NewRomantic4 1 year ago
@TheOmegaeyes Either the 3VZFE or the 1MZFE will be going in, either or will make close to 200rwhp which is considerably more then the 130-140 I have now with the stock NA 5SFE. It's a cheaper swap then the 2nd/3rd gen 3SGTE and will be better as far as gas mileage since the car is daily driven. I know a guy that will do it, his work is really clean!
TheOmegaeyes 1 year ago
@ thewindsurfguy thanx. @ fukermom666 front and rear valance and side skirts.
TheOmegaeyes 1 year ago
@TheOmegaeyes
I like the color and I think you did a good job. I will try to get my 91 deuce up once I get the fuel and temp gauges fixed. It's black and I thought about adding 17inch Konig Illusion (Black/White) wheels what do you think?
Aztech355 1 year ago
@Aztech355 Thanks goes to my buddy that did the body/paint work, I used to have Konigs on the first mr2 I had, a '91 turbo pretty much stock. I like Konigs but that's your choice my friend.
TheOmegaeyes 1 year ago
what is the body kit?
fukermom666 1 year ago
@fukermom666
Kit is called border, you can buy it from extremedimensions
FreakOutBoii 1 year ago
fuckin sexy...makes me want an MR2! lol seriously...but I'm getting a B5 Audi S4 already chipped hopefully soon....so i think i'll be ok :D
thewindsurfguy 1 year ago
Wow! love your mr2,great job with the body work looks great. Can you please tell me what size of rims thse are??
lexx988 1 year ago
@lexx988 Thanks so much, a friend of mine is responsible for the body work. The rims are 17" icw.
TheOmegaeyes 1 year ago
Very Clean! Looks Sharp!
NJExoticSpotters 2 years ago
Thanks very much!
TheOmegaeyes 2 years ago
Looking good OmegaEyes.
About the exhaust, the Berk and SSAutochrome are very simliar, but the SSA tips angle outwards, and the Berk tips will point straight back. I have a Berk on my 93T, and my buddy has a SSA on his 91T.
I like the dual-silencer exhausts. THey have a much lower, mellower bass tone than the raspy single cans (the cheap ones). Some single cans can sound good, but only the expensive ones.
cbulen 2 years ago
I've been doing some looking around and found that it looks closest to the Japspeed but I think it's an ebay knockoff cause my friend bought everything for it off there. The cut on the tailpipes of the japspeed has an angle and it also has the imprint logo on them.
TheOmegaeyes 2 years ago
i like the exhaust!
is it custom?
if not i wonna know the brand and type??
is it as loud as mine?
detukker 2 years ago
A friend of mine ordered everything off ebay for it, The colsest thing that comes to it that i've found is the SSAC/Berk but I'm not 100% sure.
TheOmegaeyes 2 years ago
dude that is an awesome car
Sk8FalIen 2 years ago