Brushless MGT, 8S, 2200-3300 Watts.

[aqwut]

I'm using Turnigy/Hobby Wing 12s100Amp ESC... with a PiStix & Mechanical Brakes..

[blackking76]

what esc r u using

[CumminsDriver635]

Have you broken any CVD drive pins on the axles? My MGT is brushed and I have already broken 2 of them.

[aqwut]

@CumminsDriver635

Haven't broken any yet... Love the CEN for bashing.. racing, not so great... I'm using only the 1st gear... and use a big pinion... I put a plastic spur on all my GST, it's an HPI Spur, just shaved to fit.. same size teeth as the first speed spur...

[CumminsDriver635]

What did you do with the transmission? Is it locked in 2nd gear, and if so, how did you go about doing it? Thanks

[Evandure]

hey thats one awesome truck

i'm planing to convert mine to brushles too when my nitro dies^^

but now i want to know if this is the mgt 4.6 or 8.0 and do you have any probs wirh your diffs?

does the kb45 8xl run hot?

very good work, i can't wait to make my mgt brushless:D

[aqwut]

Keep the KB45s at/around 25K rpm and she'll do good for ya..

[Crzracer2003]

sick ! hey i have an mgt too and i want to convert to electric , did u make a motor mount or where u find the motor mount please let me know thanx

[aqwut]

Mount was a 3x3x1/4" angled aluminum.. it was very easy to make...

[Kamakaze04]

Yes!!! I watch this vid. all the time !! Man, i need to ditch the nitro and go brushless..LOL

[aqwut]

Do IT!! you won't regret it...

[Kamakaze04]

Yeah i know... Nice you smoked the spur gear at the end of this vid>??? sounds like it.. MAD power bro..

[aqwut]

Worked pretty good, especially with a $50 Motor.. LOL and yeah, the motor is still working...

[Kamakaze04]

Nice $50 motor .... Hold on.. It  was made in China too.. ! HEHEE !!

[m283mark]

video is nice power have only experienced it by puttting 2650kv motor and mamba monster on e-maxx. on flat black top couldnt hit full throttle no matter how slow i pulled trigger on it. on grass couldnt get past 1/2 with out a flip over. nice !!!!!!

[aqwut]

yeah, that MMM is one powerful ESC, and great price too!!!

[kyle7683]

whats the name of this song

[aqwut]

Saliva - Ladies and Gentlemen + a mix of brushless MGT..

[26760gone]

hello, it's a amazing truk, but what is the configuration ? The controller is a mgm compro 160-24 cube, the lipos seems to 2 4S from hyperion, but what is the motor may be a neu 1521, 1527 or a lehner 2250, 2280 ? Thanks you, best regards

[aqwut]

yes.. MGM 24.160, 2x 4S Hyperion 20-30C 3700mAh, 18/52 and KB45-8XL

[soarersupra]

your MGT asks to be fliped I can barely get mine to wheelie. nice shit

[bluthndr011]

well then what is on the wire that is white in the begining of the vid?

[aqwut]

Strapping tape so when I pull the deans connectors off so it doesn't put any stress on the solder joints.. :)

[bluthndr011]

are there tamiya connecters on there? switch to deans!!!!!!!

[aqwut]

no way would I ever use Tamiya connectors.. I'm using deans, but I should really be using 5.5 or 6.0 mm bullet connectors.. :)

[jz97ss]

What motor and ESC are you running with setup? Appears to be a Feigao 9XL or so.

[camaro400]

8????? 8??? wow i searched 8s just to see if anything would come up. That thing is crazy.

[aqwut]

thanks.. I have a 12S setup as well. :)

a few other guys have 10S also... Cheers.

[moss1transcendant]

yeah i heard that ripp away and the loss of drive, so ite definately got more juice than a nitro block i love the MGT chassis buti got rid of mine after 2 years of pulling my hair out trying to keep the pins in the cvd's. i tried 4 brands of lock adhesives, heat shrink tubing, the only thing that ever did work was to use over size silver steel rod and bend the ends over like a z shape but that meant i had too grind em off for acess.

[aqwut]

I haven't had a problem with it yet bro... but then again.. I haven't had many miles on it...

[hock3y4lyf3]

what the hell happened at end?

[aqwut]

the spur gear melted... didn't have enough slipper pegs on there...

[nick2bfit]

come over and see my new mgt vid on 5s

[aqwut]

strobe slipper should work... seems to be identical to the e-maxx...

[rorison22]

holy crap that thing flies!!!great vid! -Wes(johndeeerekid)

[aqwut]

Yeah, that's right.. the spur is gone.. I was expecting the diffs to go as well as the hexes.. the 14mm hexes have two 3mm socket caps screws bolted right onto the wheels.. so it's it's not goin' anywhere... I need the Strobe Slipper upgrade.. or modify the Jato or Revo Slipper to fit on it...

[nick2bfit]

does mikes strobe work on this i never even considered one. other than wrecking a set of diffs i guess i never had any problems related to lack of slipper. but im only on 5s w 18/46 *2 speed

[fgsgds]

I have 3,9mm steel balls secured with epoxy in my MGT spur that I use in my E-Lst (Maxx tranny)

But then again, I only at 4S.

What's the ESC and motor?

[CulinaryGod]

What's that noise at the end? Sounds like it's over-revving.

[nick2bfit]

spurs gone out... also just an fyi i have mine locked all the way down. the slipper peg system should be called the spur gear melter system. and go ahead and get your 23mm's on order. if you haven't already stripped out stockers your lucky- No mods

[aqwut]

thanks.. next video will be better :)

[DragonbladeCX]

That's insane...Dragon (tfhughes_28 from the London board)

[aqwut]

thanks lutach.. I wish you could see this in person.. I swear, I can't go full throttle.. not enough field over there..

[lutach]

That is fast. To do that mane cart whell, you must be going at least 45-50MPH. Great.