Added: 4 years ago
From: ItaniX23
Views: 48,197
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (112)

Sign In or Sign Up now to post a comment!
  • Jetzt gibt es ein neues System, dass Ihnen dies zu einem sehr niedrigen Preis ermöglicht. Benutzen Sie Ihren normalen Brennstoff zusammen mit Wasserstoff, der dank unserer Ausrüstung direkt in Ihrem Auto erzeugt wird! Unser Gerät verwendet einen Prozess namens Elektrolyse - die WasserAufspaltung in seine gasförmigen Bestandteile Wasserstoff (H2) und Sauerstoff (O).

    GOTO HHOPLUSGAS

  • fucking scrap,..germany already invented that shit

  • Fake

  • the world needs this we are waiting as for one iam ready to buy from this guy come on get out to the world please asap

  • To cool!!! Y sir are on the right track!!

    The chickens in the background r hilarious!!

  • hi, denkt doch bitte an die armen ölscheichs :((

    diese technik gibt es schon lange, aber es darf si offiziel nicht geben.. schade

  • Also, ich glaube gerne an neu entdeckte Wunder und so habe ich mir sowas in mein Auto eingebaut. Damit hat es doch tatsächlich nur einen halben Liter mehr Sprit verbraucht.

    Nun will ich nicht behaupten, dass Herr Daniel lügt. Vermutlich funktioniert das bei ihm, weil er daran glaubt.

    Ich werde also weiter an meinem Glauben arbeiten und weiterhin den Spritverbrauch ausrechnen.

  • Das ist der dümmste Kommentar den ich je lesen musste!..

    Wie selbst der Name des Videos schon sagt fährt das Auto nicht mit Sprit sondern mit H2 aus H2O.

  • Comment removed

  • Wow, du bist entweder knapp 15, hast in der Schule nicht aufgepasst oder du bist echt aussergewöhnlich dumm!

    Die Antwort lautet Elektrolyse..

    Ich denke du hast dir "sowas" in dein Auto eingebaut, müsstest du schon wissen was du angeblich verbastelt hast..

    Hast du nen Pfleger?!

  • .du behauptest allen ernstes dein auto hat MEHR?? verbraucht??du hast wohl keine efi zwischen deine lamdasonde gebaut nehme ich an....da kannste froh sein,wenn du mit +-o raus gekommen bist.wie gesagt...ich habe einen alten kadett mit vorherigem verbrauch von 10 litern auf ca 5,5 liter runter bekommen.muss sagen,dass meine zelle fast 40Ampere geschluckt hat und ich extra eine grosse batterie und eine 90Ampere lichtmaschiene verbaut hatte.

  • Hast Du ein Auto das na 1996 produziert wurde, brauchst Du eine spezielle Elektronik um die Lambdasonde etc. auszutricksen. Sonst ist die ganze Mühe umsonst. Dein Auto wird tatsäüchlich um so mehr verbrauchen, umso mehr Browngas zugemischt wird, weil der Bordcomputer die ganze Zeit den Gemisch kontroliert und bei Bedarf mehr Sprit dazumischt.

    Übrigens, Dingels Auto fährt nicht mit reinem HHO sondern HHO3.

  • Warum wird hier ständig beliedigt? Kindergarten oder wie?

    Wenn schon so viele am gleichen/ähnlichen Projekt arbeiten und Ergebnisse haben, postet doch eure Videos anstatt Leute zu beleidigen?

    Ich hab zwar keine Ahnung davon, würde mich aber über mehr Videos mit Erklärung sehr freuen.

    Warum der Herr Dingel die Technik nicht verkauft, verstehe ich nicht. Er will kein Profit machen? Keine Problem, soll er doch die Erfindung verschenken! Selber was behalten was die Welt braucht???

  • It requires more energy to break down water into HHO than is provided by burning the result. This is nothing new, it's not producing any energy, just storing it, and at a very poor efficiency! This is just saving money at the gas pump to spend 3 times more on your power bill. Not a very good deal if you ask me.

  • Comment removed

  • Ja gehts jetzt oder nicht? ich würde sofort mein Auto umbauen wen ich weis das es funktioniert und das auf dauer ohne das der Motor oder sonst was kaputt geht dabei :-) retten wir endliche unseren Planeten und unsere Saubere Luft die wir atmen.

  • gUteN mOrGAN Daniel Dingel, a Filipino inventor, has been claiming since 1969 to have developed technology allowing water to be used as fuel. In 2000, Dingel entered into a business partnership with Formosa Plastics Group to further develop the technology. In 2008, Formosa Plastics successfully sued Dingel for fraud, with the 82-year-old Dingel being sentenced to 20 years imprisonment.[3]

  • And Stanley Meyer was murdered ;(

  • Murdered?! Fucking money Maker!

    But a thanks @ Mr. Meyer for his idea and work!

    Ich hoffe die Welt arbeitet weiter an der Idee und auch an anderen,es gibt so viele Möglichkeiten die seit ewig unterdrückt werden.

    Bastelt heimlich und anonym!

    Ist was perfekt, radikal veröffentlichen so dass es nicht aus gebremst werden kann!

    Die Leute die meckern,haben nur gedachtes und anerzogenes wissen der manipulierten Gesellschaft im Kopf und kein eigenes Denken.Oder verdienen selbst Geld damit!

  • Und Daniel Dingel wurde verknackt für 20 Jahre, wegen angeblichen Betrug - ihm wurde eine Falle gestellt. Kapanadze, der aus der Erde Strom anzepfen konnte, musste aus Russland flüchten. Das Kapanadzesystem wurde geprüft und es funktioniert! Sucht auf overunkty (dot) com nach Kapanadze.

  • no more to blood oil !!! i will be waiting for this car type on the market..

  • forget that, im going to build my own. anyone can do it, daniel dingel isnt go you know.

  • Good on ya mate! Keep on keeping on Dingel my friend! Now, for your closing act, set yourself free from your communities "POWER GRID" and you will have done the feat of ages! Your name will go down in history books...

    God bless you Dingel!

  • one day I put a tank of 5 gallon 125psi on mi car, inside was a generator, I put the horse on the vacuum.

    I turn on the car, I close the gasoline and the card was running for more the 10 minutes.

    I thing is not the productions, is how you inject the Hydrogen only. no hho

    to make hydrogen only I use salt water i put 2 container inside the tank one for the + other for the -, so I make holes, I out paper on the holes, the only productions was the -hydrogen and the +0.01% of oxygen. or 0

  • OMG all german speaking people hehehe I didnt understand one word you guys are saying hehehe. But more power to Daniel Dingel

  • Bei aller Gutgläubigkeit, aber was der gag mit der Luftdruckpistole soll, bleibt mir unverständlich. Ob man da Luft oder HHO-Gasgemisch gemischt mit Luft ansaugt, macht im Effekt kaum einen Unterscheid. Sowas nennt man für "dumm" verkaufen.

  • Das ist keine Luftdruckpistole..das ist eine umgebaute 'Spritze' mit Elektrozünder!

    und Luft allein brennt nicht...

  • Beim 1. Schuss sieht man aber keine Zündung.

    Wie auch immmer. Danke für die Erklärung.

  • Ausserdem brennt Wasserstoff nicht. Dazu braucht man Sauerstoff. Dingel sagt aber, sein Teil würde Wasserstoff und Sauerstoff trennen.

  • Ach ne..

    Dingle spaltet Wasser (H2O) auf in Wasserstoff (H) und Sauerstoff (O).

    Wo ist dein Problem?

  • Er sagt ständig, dass aus dem Schlauch links nur Wasserstoff käme. Der Sauerstoff käme aus dem anderen Schlauch rechts. Dies bestätigt er nochmals auf Nachfrage.

    Wegen der Zündung der Pistole und der Erklärung der Schlauchverbindungen ist anzunehmen, dass aus dem Schlauch links 2H(2)O(2) und nicht reiner Wasserstoff kommt.

    Bei einem Ingenieur, der sich über 30 Jahre mit seiner Erfindung auseinandergesetzt hat, würden solche Unstimmigkeiten in einer Dokumentation nicht vorkommen.

  • dann war eben noch genug luft in der "spritze"

  • Dann schau mal das Video.

    Ich will niemanden seinen Glauben nehmen. Das Thema wird nur absolut kritiklos für wahr genommen.

    Wenn das Auto tatsächlich mit Wasser fahren würde, wäre es ein Vermögen wert, d.h. es wäre ihm längst gestohlen worden.

  • Es existieren Aussagen Dingle's in denen er von Morddrohungen in Bezug auf die Veröffentlichung dieser Technik spricht und er drückt mehrfach deutlich aus das es ihm nicht um Profit geht..!

  • Das tut dem möglichen Wert keinen Abbruch. Bei der Dimension würde man keine Morddrohungen aussprechen, sondern zur Sicherheit schlichtweg morden.

    Mit dem Stehlen steht es genauso. Es gibt genug Organisationen oder verrückte Sammler, die keine Kosten scheuen würden das Auto einzukassieren.

  • ... aber es besteht offensichtlich kein Interesse, weil's wahrscheinlich ein Hochstapler ist.

    Ich schreibe Software auch nicht um Profit zu machen, sondern um zu "HELFEN". ;)

    Dingel verkauft sich durch die Videos sucht Partner, die 200 Produktionseinheiten/Woche liefern können. Es würde mir nicht leid tun, wenn er diese netten Herren übern Tisch ziehen könnte, im Gegenteil.

  • DU schreibst Software um zu HELFEN?! Wem denn, dem Staat? Bastelst wohl am Bundes-Troyaner mit wa?..

  • Du kommst von Thema ab, doch wenn Du oder irgendjemand der werten Leserschaft Hilfe zu Standartsoftware oder webbasierte Applikatinen braucht, kannst Du dich bei mir melden.

    Ansonsten sind deine Behauptungen meiner Arbeit oder Person gegenüber vollkommen unbegründet und ich nehme an, du wirst diese Behauptungen zurück nehmen und dich dafür entschuldigen.

  • Entschuldigen?! :-D

    Für was denn? Schlag mal den Unterschied zwischen ner Frage und einer Behauptung nach!..

    take it easy

  • Das Problem ist, das zur Spaltung von Wasserstoff und Sauerstoff mehr Energie zugeführt werden muss als bei der anschließenden Knallgasreaktion zurück gewonnen wird. Es wäre effektiver, die Energie direkt in den Antrieb zu stecken, wie beim Elektroauto. Es gilt auch hier der Energieerhaltungssatz

  • ich brauche keine ausreden.. meine zelle wird momentan im dauertest getestet und wird nächsten frühjahr in serie gehen. werd dir dann früh genug bescheid geben..dann kannst mir eine abkaufen. 1000euro sind dann fällig,für die grundzelle,plus kühler,thermostat,zusatztank,f­üllstandsanzeiger,heizwendel und montagematerial wie schläuche,schellen usw.

    mal sehen wer hier dann der vollspack ist du spinner.

  • DINGEL BENUTZ LEDIGLICH KLEINE ELEKTRODEN MIT EINER SPANNUNG VON 1,9V PRODUZIERT ER MEHR ALS GENUG WASSERSTOFF.DIE SPULE DIE ER BESCHRIEBEN HAT WIRD NICHT FÜR DEN HOHEN STROM BENÖTIGT SONDERN FÜR DIE 1,9V DIE ER NUR BENÖTIGT!!

    LAUT RECHNUNG KANN ICH AUS EINER 24V BATTERIE MIT 180AH KNAPP 1m³ WASSERSTOFF HERSTELLEN.1000LITER SIND DAS!!!

  • Kannst du mir die Elektroden noch näher beschreiben? Aus welchem Material bestehen die, Kupfer? Wurden spulen verwendet?

  • schonmal an einen impuls gedacht ab 200hertz

    aufwärts?den effekt bekomme ich bei einem vierzylindermotor ganz einfach über einen zweiten OT-geber und einer zweiten zünspule.dessen klemme 4 an die zelle angeschlossen wird. somit hast du bei steigendem gas/drehzahl immer die passende frequenz.die zelle muss auf die spannungsspitzen angepasst werden so dass die zweite spule umgerechnet ca2V und 0,5-0,9A pro cm2 bestromen.

  • Du Vollspack!! Von nichts ne Ahnung und davon viel was??? Es geht hier um eine Energiemenge, die notwendig ist, um eine bestimmte Menge H2 herzustellen. Elektrische Energiemenge wird in kWh angegeben und nicht in AH! [Fehler #1] Und 1000 Liter H2 gasfoermig ist ein Furz, mit dem man ein Auto vielleicht 400 m weiterantreiben kann.[Fehler #2] Und es bleibt dabei, dass man mehr elektr. Energie braucht als man Energie in Form von H2 bekommt [Fehler #3].

  • wer hier wohl der vollspack ist..

    ich weiss was ich gebaut habe und das meine zelle bisher 45% benzin einspart.

    dass ich von dir hier nur scheisse sehe ist mir schon lange aufgefallen.wer bezahlt dich eigentlich für die scheisse die du hier schreibst?

    meine zelle arbeitet im vakuum,bei 25Ampere verbrauch bei 13,4 volt. das gas was ich aus der zelle hole,und zwar mit leitungswasser ist so energetisch dass ich die ersparniss heraus bekomme. habe schon mehrere tests durchgef.,ES FUNKTIONIERT!

  • Oh, forget, you must be the guy who was offered the Nobel Prize this year, right? Because you just solved the energy crisis for the whole mankind. What an achievement! Or is it that you don't reveal your "glorious invention" to the public, because you don't want fame, success, and money? What an altruistic human being!

    Bevor du mit einer Konspirationstheorie kommst, Oelfirmen wuerden sich fuer deinen Schwachsinn eh nicht interessieren. They could not care less about your stupidity!

  • 24v x 180Ah = knapp4,5kw/h DU VOLLSpACKEN

    nichtmal rechnen kannst du shanghaijoachim

  • As I said, dimshit, an electrical charge is measured in KWh not KW/h. As I said, you ain't have a clue of anything, but from this a lot! Hihi ... 24v x 180Ah, that would be what?

  • Um sich eben wissenschatlich auszudruecken muessten eben erst einmal die physikalischen Groessen richtig verwenden!

  • /watch?v=eb9urNUFzAM

  • what a waste of time! And what a misleading video! Why does not this video explain how H2 is generated? By using the battery? And if there should be enough electricity to generate enough H2 to run the car why not use this electricity to run electo-motors? Why not have this car analyzed scientifically?? Ah, yes ... I know: because this is the definition of bullshit!

  • Shanghaikidx...Seems you want to teach us?.. Did you ever invented anything?Am pretty sure none!!Inventors never think like common human being..they had a passion which a common people like you cannot dig...Your name implicates your true personality..lumpiang shanghai...crunchy... a cheap dish...lol!

  • Actually, no, I do not want to teach you anything. Helping you become intelligent ... oh I better I will help a man set foot on the sun. This endeavour has a higher probability of success.

  • stupid shanghai kid. Go nack to china and drink your milk.

  • Dim shit. You don't have a clue about anything, do you? But from that a lot!

  • Ok a free lesson in physics here:

    It's not water powered, but by hydrogen, H2 or whatever you want to call it! H2 can't be mined anywhere, it's just an energy carrier. The H2 can be produced from natural gas or from electricity(from coal, nuclear, solar or whatever you like).

    The natural characteristics of H2 require to liquefy it (at T=-253 C or T=20 K) or to compress it (at p=200 bar). That is why it takes about 4 liter of gas to make an equivalent liter of H2.

  • daniel dingel cannot provide a hard scientific proof for this invention. the energy needed to break the bonds of a water molecule would be far greater than the energy needed to run a car. dingel used electrolysis to break it with a DC as a power source. this would mean that it is more practical to use an electric car.

    furthermore, this would be a clear violation of the laws of thermodynamics if he could break the bonds of water at low levels of energy. wake up people and read a bit of physics.

  • if you dough pls see daniel dingel & i know you are there in the philipppines, when i get home i drop there and see him personally, im here in the cal., usa. possible it run dahil yung lang kay Joe cell's tumakbo nga, limang roung electrode lang, the center is anode and cathode is the last round electrode, pinatigil nga sya yung mga kasama nya ng FBI agent, i already read & reaserach this technolgy, matagal na ito naibinto ang tubig hindi pa buhay sa danile noong siglo 1800.

  • could you read your reply again. i find it hard to understand due to grammatical errors..

  • pls see & research Joe cell's, dingel principle he uses dc to ac ignition to boost the output. If you dont believed him why dont you come and see him in manila. Or you can make your own naman, dahil alam ko sa Japan nya sa ngayon kinuha ng Mitsubishi according to my source in Manila.

  • ah, yes?? And where do you think he gets the current from? From a battery? And where does the battery get the electricity from?? Hahahahahaha ...hahaha

  • Dr. Dingel has done it. You think you know a lot about water but in reality you will find you know very little. Don't worry your in the majority in that everyone takes water for grantet. Answer these questions if you can. Why does ice float? How does water self ionize? Why does the hydronium ion float on water surface when it is heavier than water? Once you answer these you will see all they are doing is using the natural properties of water, and it is not breaking the laws of physics.

  • Smart thinking with the surge tank, for it acts like a buffer to make up for lag time of producing hho gas on demand. In short it gives the system extra time to make the hho gas when you press on the pedal. Very nice!

  • i think i dont high voltage to produce hho, do i need is the neutral plates arrangement, i furher study with Joe cells, simple the neutral plate's is in the middle and round has no connection, cathode is in the end of the electrode, it prove run the car.

  • joe cells the center electrodes is anode & the 3 electrode has no connection, act as a buffer, and cathode is no. 5 electrode. The stage 3 cell run the carburador truck.

  • No, this is not the same techonolgy, this works on using water as a dielectric in a capacitor. Dr. Dingel's cell is working like a capacitor, and so is Stanley Meyer's. There are others that did this too, but I for get there names.

    Hope this helps out some.

  • battery & capacitor both store electrical energy, but Inside the battery, chemical reactions produce electrons but capacitor as it can't produce new electrons - it only stores them. cap discharge quickly in tiny seconds, but a battery a minuates

  • theory behind in joe cells is deielectric style, whereas the dingel behind looks like Leyden principle, he was the first person who discovered the capacitors to charge high voltage.

  • h2power i have some idea i have to apply for injection purposes, i tried to use the 12volts electric selenoid for water,fuel,alcohol gas, for uses for this selenoid, i found one in the ebay. this of & on, the same w/ car injector

  • the secret for my further study is neutral plates, this is one of my focus since Joe cell's is proven working w./ dielectric/neutral style.

  • i belvd dingel uses an aluminum w/honey comb seperator in the middle of the reactor, applying anode state process and the end of the plate is cathode state to produce a powerful hho gas.

  • h2power i found a neon tranformer which is tesla coil 12,000 volts what do you think of this?

  • fuck fuelling station HYDROGEN ON THE FLY IS THE WAY !!!!

  • h2opower sounds like you now all mr dingles water power car. do you have one already?

  • I live in the US, but I am a fare mechanic so I hear things that others do not. My car is getting prep for the water fuel technology, got very low funds so things are going slowly. Dam gas prices have gone up every time I had to fill up. All I can say is the switch over is kinda costly but in the long run it is more than worth it.

  • Dr. Dingel is one of my heros, and one day I hope to get close too his work on water fuel technology. Only time will tell, but his technolgy is close to what Stanley Meyer was doing also, but he was first so he gets the gold. I only wish I could talk to him and ask some very important questions that would make him go humm...

  • daniel update water car, he split the battery from dc to ac then dc to put a cold, in other words it boost the system into powerful hydrogen output, h2power you have any idea what daniel said.

  • daniel update water car, he split the battery from dc to ac ignition coil I mean then dc to put a cold, in other words it boost the system into powerful hydrogen output, h2power you have any idea what daniel said.

  • Basically it is a Tesla tank circuit.

  • what state are you Mr.h2power? im from california, Fresno. Im not a mechanic incline but I know little bit of mechanic, but i have a very intensive studies regarding water, for me is so amazing running with water, i was so amazed with this guy, nobody can stand his invention bec he's using injection engine with fuel of water only, hydrostar selling the manuel but there is no proven that this hydrostar running on water, much better with Joe cells, but he was suppressed by the FBI.

  • I can't say until I at least finish my work on this, and move on too no back EMF motors, with DR. Peter Lindeman.

  • there's any way to contack scientist dingel, for me he is a super genuis,this invention is amazing. This guy still in Paranaque? How can this guy? Dingel when you plan to sell your gadgets? We cant wait anymore, the oil gets high & the people suffered & govt fun of corrupting our money. Pls we need your help, you are God's messenger to solve one another our dying economy.

  • dingel using aluminum plates, on top is honey comb seperator, maybe he's using excess ac generator current from alternator to boost the rector. oxygn goes to intakemanifold, hydrgn to container then to levitator, to selenoid injector. In his update he's using another motor maybe to imboost the power.what do u think hpower am right?

  • maybe he's using another alternator, he convert alternator to brushless alternator, to produce 24dc,36dc, i notice he "on" the switch i heard a motor running w/c i believed this another alternator to boost the reactor.

  • A Car Alternator Can Be Made Into A Powerful Hybrid Brushless Motor In A Couple Hours With Common Tools.

    Use for electric vehicles, robotics, industrial, alternative energy, experimental electric aircraft, and automotive applications

  • One thing is for certant that is we need a unit that can put out somewhere between 10-20 liters per minute. I am trying both his and Meyer sort of mixed together with both technologies. Just very low on funds all the time and our dollar is sort of crashing right now. A lot of things are going on here in America, that are not good. Seems we will lose our sovernty to the North American Union by 2010. I just wish I had more income to get things going so I too can be energy independant.

  • Mr. Dingel talking about levitative I was so curious what is this? he sid," the hydrogen goes to levitative then selonoid then to the engine.

  • possibly he mean simply the hydrogen floats to the engine?!

  • He is using engine vacuum to draw in the hydrogen/oxygen mixture. You can hear the vacuum when he pulls the main line off too the solenoids.

  • so, in other words electronic injector can be use for hydrogen gas unless you will calibrated the injector, and the same time the adjust the ignition timing between 10 to 15 degress am right Mr. h2power?

  • Yes, Hydrogen is a bit harder to time than slow burning gasoline due the the burn rate, but who cares all we want is to get off gasoline, right? I think I know how it is to be done, but still testing on it.

  • A fuel injection system is designed and calibrated specifically for the type(s) of fuel it will handle: gasoline (petrol), Autogas (LPG, also known as propane), ethanol, methanol, methane (natural gas), hydrogen or diesel. The majority of fuel injection systems are for gasoline or diesel applications. With the advent of electronic fuel injection (EFI), the diesel and gasoline hardware has become similar.

  • Mr. dingel using selonoid instead of injector, to spray the hydrogen gas in the chamber. Mr. dingel what type of selonoid are you using? it is water selonoid or LPG gas selonoid?

  • An electronic injector is a selonoid, if you take a very close look at it.

  • "ricjanepaul" have questions for you

  • I have been a mechanic for over 20 years so I can be of use here. He is using engine vacuum to draw in the resulting gases. I was planning on using some injector meant for gas, like natural gas, or propane, but what you must try to do is get the one the is closest to hydrogens burn rate.

  • what is question to me itanix23? Pls let me know what is it?

  • dingel using aluminum plates, on top is honey comb seperator, maybe he's using excess ac generator current from alternator to boost the rector. oxygn goes to intakemanifold, hydrgn to container then to levitator, to selenoid injector. In his update he's using another motor maybe to imboost the power.what do u think hpower am right?

  • maybe he's using another alternator, he convert alternator to brushless alternator, to produce 24dc,36dc, i notice he "on" the switch i heard a motor running w/c i believed this another alternator to boost the reactor

  • A Car Alternator Can Be Made Into A Powerful Hybrid Brushless Motor In A Couple Hours With Common Tools.

    Use for electric vehicles, robotics, industrial, alternative energy, experimental electric aircraft, and automotive applications

  • volts dont matter.. really depends on AMPS. probably that type of reactor consumes around less than 20 amps

  • This is a different way to get the same job done as the old Faraday type electrolysis. Look up a tank circuit and learn all you can from it, for the main capacitor is replaced with one of these type of cells. And in that circuit Dr. Dingle replace the one diode going too the inductor with a voltage multiplier, so best look that up too.;)

  • i saw in the yotube, "water power sand buggy scum", this guy cretics Stan Meyer of his power car, bec, he said, he's using two alternator to generates in order to run his car. What do you say for H2power?

  • The technology is not the same as Dr. Faradays, Meyers only used the second alternator too send the pulsing through and lower the amps like a tank circuit. The technology does work, it just thows that are in power now will lose their control over the masses and a lot of money. That is the only reason why we all don't have it right now, Greed.

  • Meyer claimed to have adapted a 1.6-litre Volkswagen Dune Buggy to run on waterHe replaced the sparkplugs with "injectors" which, he said, sprayed water as a fine mist in a "resonant cavity" where it was ombarded by a succession of high-voltage electrical pulses. He claimed this instantly converted the water into a mixture of hydrogen and oxygen that could becombusted in the cylinders, driving the pistons just as in an ordinary petrol engine.

  • but dingel is diffent he used, selonoid instead of injectors, but he didnt removed the spark plug, chamber. I belev he used high voltage frequency to split the hydr/oxy Maybe he used another alternator w/c is high voltage. and compressor to draw more hydrgen to the

  • A selonoid is an injector, Dr. Dingel just made the delivery system for the hho gas a different way, thats all. But the two technologies are very close, in that they use voltage to do work, at minimal current levels. He is useing tranformers and chokes to get the same job done. Even Meyer did away with the alternator when he made the injectors. Hope this helps some.

  • hi h2power, it is possible that Dr. dingel used electric motor instead of alternator, in his update he switch "ON" it sound that there is motor drive because the car ignition switch was not "ON". Yu notice he has a big battery on the toyota car, Motolite battery

  • Learn about Tank Circuits and then you will see the process. It's a dual resonance tank circuit for the most part. Get off of the motor or Alernator, that's just coils as any other. Learn the system! Pulsed DC from 20k-30k volts, others went as high as 70k volts. Time for you to think now, okay? You have the internet so start studying Tesla's works for it all comes from him. You have to adapt it too use with water.

  • i month ago i bought a plan from the ebay about hydrostar, im so curious about this system. what u think for this plans? i bought camry 1994 just for expeirement, hope i can got more idea how to run a car in water.

  • you have any idea with the reactor of Dr. Dingel? It says there he's using aluminum tank isntead of stainless. My idea is plain alu then honeycomb alu then another plain aluminum, alternate each other. I saw that there is honeycomb on the top of the reastor what is that H2power?

  • Dingel uses an Aluminium flash arestor, as for what is in the reactor, my guess in SS. For it and it alone is the only one that can withstand electrolysis without decay. As for the reactor my best guess is a honeycomb plate with the same shape rods inside of them very close, say .06-.01 inches.

  • h2power what you can say about EFIE device to fool the oxygen sensor for gas economy, the author said if you want to put hydrogen booster you need to install this device without this the hydrogen booster is useless.

    Did you start now making your own reactor? I want to get my old car 94model tonight intended hydrogen study, so i paid 3,000 us dollar for the sake of this invention hope i can get more knowledge & if you will willing you can help to finish our dream.

  • Ginoong daniel kayo po ba si h2power? ginagalak kong makilala kayo, sa pag uwi ko dyan sana magkita tayo, hanga ako sa mga inimbinto mo, walang kaulad mo, ikaw po hulog langit sa buong mundo, sna matulungan ating mahihirap na mga Pilipino.

  • hi ricjanepaul, hindi po ako si Daniel Dingel isa lang akong mekaniko for 23 taon, nangyari lang magaling ako sa science. At saka ang goal ko is bring this technology for the poeple and bring independece to the wold. Ang pagtingin ko kay Dr. Daniel Dingel siya ang aking hero. Ako ang asawa niya ang nagtype kasi hindi marunong ang asawa ko sa salita natin pacinsya kana!

  • i plan to make the reactor, pls give me any idea of the reactor of Dr. dingel, what do u think how many aluminum plates he put in the reactor? In his previous reactor it looks the plates was half (width)of the battery reactor. I think i need a compressor to put air in the tank just to boost the output. To put more air, air-hydrogen/oxygen push to the sendimeter. then to selonoid.

  • He is using SS honey comb with hollow or solid six sided tubes or bars. But again the he is using SS honey comb possibly used for flooring systems, and put some of the same shape tubes or bars inside of that. That's my best guess, lol.

  • No, it's the same as what Meyer had done, using voltage to break the bonds of the water molecule, if you listen to him he talks about magnetizim as did Meyer.

    I saw the circuit diagram before it was pulled from all online sources and the main differance from his and stanleys is the use of a voltage multiplier, and the negetive is going through a coil then strait to an isolated ground.

  • there a lot of pwm generator sale in the ebay, what do you think is the best can be suited to produced good production of hydrogen, it be might this parahydrogen sytle of hydrostar. Can you suggest what is the best pwm generator Mr. h2power. Thank you

  • As far as buying one I am not too sure on that. As far as I can tell no one has made it in a way that you can control the voltage independantly of the pulsing and frequency. That is what is needed some type of pulsing unit that the voltage can be raised or lowered at will without messing with the pulsing or the frequency. I really don't think I have seen one like that on the market.

  • i plan to buy a toyota camry 94 model, within this week, bec im eager to test the water 4gas i bought in the ebay. I came across with meyer rotary regulator he's selling this finish circuit, what do you think it work with dingel reactor, the meyer's circuit rotary regulator.

  • i mean with meyers pmw with daniel dingel reactor what do yu think it work to combine this technology. I want to expense even thousand dollars just to fulfill this water car research, bec for me is a fulfillement in my life.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more