Is It Li-po Ready? Airsoft gun testing with 11.1v LiPo Batteries!

[XBLKU5H]

im getting the magpul pts masada and i was wondering if that gun was LiPo Ready???? :D

[DistrictRogue]

@crazyNCman okay i have a DPMS Panther Arms AEG M4 and it comes with a 7.2v but i want to put a 11.1v LiPo on it but do i need to put a MOSFET?

[crazyNCman]

@DistrictRogue If your gun came with a 7.2v then it is just a plastic gear gun and you can't use anything else really.

[Smennyboy]

Dude, why are you not wearing glasses !

[cayusez]

No eye protection lol

[MrKukkeliskuu]

Lipo is so powerful that it speeds up the video it self! O.O

[NeonVars]

Okay so if I tried to put a 7.4 lipo in a KA m4 would I need a MOSFET for that small of battery? I've been searching for a result that's reasonable enough to rewire my gun to the back but I heard lipos can fry if you don't install some safety mechanism. What's the best for a small lipo stick battery.

[crazyNCman]

@NeonVars No you do not need a mosfet for a 7.4v li-po. tenergy li-pos are ok, just avoid Firefox and the other cheap crap batteries the Asian retailers sell.

[DrZombie00]

No AEG without some sort of protection on the trigger is lipo ready, just as simple as that. If the gearbox doesn't fail, the trigger contacts will, specially if you use semi-auto very often.

[crazyNCman]

@DrZombie00 Not true. I saw a stock TM P90 run on an 11.1v li-po for over 2 years with zero problems.

[DrZombie00]

@crazyNCman It will burn the contacts eventually, it isn't about quality of the gun, the battery or anything else, just physics rules. A higher discharge rate of a lipo will burn the contacts at least twice as fast as 9.6v, if we're talking about a 25c (which isn't the that much for a lipo) that would screw the contacts in even less time. Just get a mosfet, guns should come with a mosfet out of the box nowadays to be fair.

[crazyNCman]

@DrZombie00 Nobody needs li-po batteries anyways. High ROF and "trigger response" are for people who can't play worth a shit!

[unmi1231]

@crazyNCman so if u going to us a lipo get a gun with metal gear box a good mag and your good?

[vivalabaker]

@unmi1231 first, learn how to type.

[unmi1231]

@vivalabaker ok... were the secound thing... and i can type moron i wouldnt be on here...

[roflsniper1]

@crazyNCman please answer i have a game face starter m4 im using a 8.4 volt NON LIPO battery when the battery gets really low the semi auto turns to full auto is this normal?

[1808koa]

is a well r6e or a jg g36c good for beginners?

[DanishFlandersDK]

you're eyes :O no glasses or anything :O

[Jerv165]

Is my SRC( TSD ) SR4 li-po ready? because i tried a firefox 11.1v li-po and its a beast at 24 bbs per second!

[MrMcshwangler]

Is my echo 1 scar h lipo ready im using a 9.6 1200 mah right now

[Atomic9t9]

Is my classic army m15a4 sportline ready for a lipo right out of the box after using an 8.4v 1000 mah. If its ready what voltage?

[XxDomKillerxX]

Is my Cybergun Colt full metal M4A1 Lipo ready and what size?

[AIRPAINT247]

I have a standard jg m4 that was sent for repairs, but i got it back, and i dont really like the rate of fire would an 11.1v lipo work in my gun?

[PYR0NinjaPXG]

@AIRPAINT247 No, you'll end up either stripping the gears or the piston.

[airsoft924]

is the king arms m4 lipo ready

[pixiedawg556]

@airsoft924 7.4 lipo : yes. 11.4v :definitely not.

[slit555]

Hey, kind of off-topic, but are you ever going to continue airsoftplayertv shows?

[BakeddCat]

Hey I know you get these questions but do you think the G&G f2000 is lipo ready??

[killerwalnuts]

3:04 haha, squirrel laugh!

[SamWazamTV]

What gram BB should I use for around 380+ FPS MP7 running on green gas? Because I want to go to Tactical Airsoft Arena.

[nygiants7271]

@SamWazamTV probably .25, if you really want to .3

[bobevan101]

no glases thats just dum

[MRVfilmproduction]

hahaha i love the look on your face when shooting it; like its bout to explode lol

[JTDWisONLINE]

Shiny fingers...

[CaveTarra]

Remember people, motor only takes what it needs. 30C and 100C are going to be exacly the same in basic gun.

[GuitarPhoenix911]

can you do the combat machine by G&G?

[animefanjapan]

does anyone know if my VFC hk416 can handle a lipo 11.1 v with 15c ?

[CenterEntertainment]

2008 JG M4 S-System, all internals maxed to work with a m150 spring, is my gun 11.1V Lipo ready??

[LeMXWarrior]

do you need to make any internal upgrades for lipo? i dont want to fuck up my gun

[TopshotAirsoftTeam]

how high of voltage could the g&g combat machine m4 take?

[MCArmory]

wait so could you replace the gearbox with a better one say G&P?

[Legionnaire8888]

@MCArmory Not necessarily. Even if you could, you might just even spend same amount of money to buy a decent JG or a nice G&G gun while you're at it. A decent metal gearbox costs a lot of money. But when you're talking about a G&P gearbox, that is the major leagues right there.

[peanutpeople0077]

is there a charger tht can charge multiple guns at the same time? 

[TeamHOGZairsoft]

is a jg sig 552 commando lipo ready? the metal one

[LaderaAirsoft]

eye pro?

[jdawgisyodaddy]

Next up. Crossman pulse r76. I kinda wanna buy a lipo and put it in my r76 when I get my new gun...

[HaloTheRipper]

@jdawgisyodaddy you should use a car battery

[dapa4]

God, do I miss this...

[STKhero]

i have a g36c, what is the best 11.1v lipo battery to use for it, like what would fit the best in it?

[SeigeAirsoftUk]

would the G&G cm16 carbine be lipo readY?

[Breakneckhydra1]

@SeigeAirsoftUk

No.

[5344756]

wow lasted alot longer thn i thought it would

[steelekilla101]

So judging from this, my VFC scar L should be able to handle a 11.1v lipo fairly well. I'm not paying $420 for nothing.

[Alecridge]

wat is systema?

[Breakneckhydra1]

@Alecridge

One of the best aftermarket part company for airsoft.

[got2fly4ever]

the gun can handle lipo ok but this guy had a high discharg lipo in it judging from the rate of fire he was getting im going to say the bettery had about a 25-40C discharge rate so if you got a lipo which had say a 10-15C disscharge rate you would have a lower rate of fire and your mag could keep up and you wouldnt have gun problems

[crazyNCman]

@got2fly4ever The gun cannot handle any look. It is a plastic piece of crap.

[need4speedaholic]

@crazyNCman hope this isnt a stupied anser but how old do you have to be to be able to get a airsoft gun

ps im 15 and sorry for the spelling

[bradycorcoran]

@need4speedaholic you can buy an airsoft gun at any age.

[need4speedaholic]

@bradycorcoran thanx im knew at airsof so i didnt realy know wat age!thanx

[need4speedaholic]

@bradycorcoran thanx man !!!!

[bradycorcoran]

@need4speedaholic you're welcome!

[crazy4piehobo]

@crazyNCman hey man. I was wondering how to make your gun lipo ready. What internals do you change?

[KingDededeMaster]

@got2fly4ever He is the crazyNCman, he likes doing "crazy" things we all enjoy watching. Imagine the work and money he puts into these videos. I respect this man.

[ablahblah54]

@got2fly4ever The gun couldn't handle 2 hi-caps full of magazines, which is less than 900 bbs. Airsoft guns regularly see action in excess of 1000 rounds. If a gun can't go 900 bbs without a major failure, it can't handle a Li-Po.

[spritegamer]

sounded like a dremel at the end

[asm101999]

I live in South Carolina!!!

[crazyairsoft115]

thanks and say no to SB 798

[MumfordAirsoft]

@crazyairsoft115 agreed

[crazyairsoft115]

is a dboys m16a4 ris full metal lipo ready

[TheHekaa]

@crazyairsoft115 not without mosfet

[giley124]

could you use it with an stock SRC G36c version 3?

[hondasarecool1]

would a 7.4V lipo work in a 7.2V NiMH standard gun?? i have a CYMA CM.023 MP5 and i wanted to know if i could use one of these batteries, preferably a dynamite

[crazyNCman]

@hondasarecool1 you could. Have to change the plug on the gun though.

[hondasarecool1]

@crazyNCman What about over-discharging? i know for rc cars you can get a novak smart stop which prevents this but is there anything for an airsoft gun, or will i just have to unplug the battery before i ruin it?

[BakeddCat]

@hondasarecool1 LOL

[MrAbedogg]

why the hell would i put this in any gun... i mean maybe cqb but other than that wtf? haha

[tkman12]

nice eye saftey lol JK love your vids

[mrcool0975perry]

what is lipo

[Zanime12]

is it possible to upgrade from a plastic gearbox to a full metal gearbox?

[crazyNCman]

@Zanime12 not really

[andynight75]

@Zanime12 Depends on the AEG but you can usually source metal replacement gears. That said if you're gonna go to the time and expense of totally upgrading your mechbox you're probably better buying an AEG with metal gears in the first place...

[Mjarf88]

@Zanime12 If it fits into the receiver and is compatible with the hop up chamber, then yes.

[andromedarr]

@Zanime12 If it has the righ shape then yes.

For example this one has a V2 Gearbox, but with a plastic shell, that can be upgraded to metal.

However, just buy a new one, those plastic gearbox guns are crappy even externally

[GaAjPwNz]

@Zanime12 its possible to upgrade from a plastic to a metal don't listen to him, just buy a nice metal gearbox and a tightbore barrel, and a bunch of other internal shit for like 200 dollars, highly unrecomended but its possible.

[chubbs636]

@Zanime12 it cold e posible in some cases, but it will always be cheep to just to buy a new gun with metal gearbox

[MChauSD]

great instructional for those who have lower end to middle airsoft aegs. I have a KWA m4cqb and run a 9.6 most of the time and just recently bought an 11.1v. I know that it can handle it but constant fire on pretty much any airsoft gun will cause wear and tear on the gears. even if you have metal gearbox shell and gears. its bound to happen. just not as quickly as plastic gearbox with plastic gears.

[rod4life123maggie]

Lol I was expecting that thing to blow up lol!

[AmazingSuperStar1]

i just ordered a JG M4 2011 enhanced version, does anyone know if it is lipo ready?

[EightPenguins]

@AmazingSuperStar1 On the websites they say they are, but I wouldn't try it, because it's a JG

[AmazingSuperStar1]

@EightPenguins what if i made some internal improvements?

[EightPenguins]

@AmazingSuperStar1 Then try it at your own risk. My JG broke twice, on a 8.4.

[deepsouthairsoft14]

so would a cyma colt m4 full metal gearbox and gears stand up to a 9.6 volt? the standard battery is an 8.4 mini nunchuck

[AmericasLegand]

I was watching a ceazyNCman video. Then i was thinking about 'lipo batteries'. I typed in 'Airsoft Gun on Lipo'; and this showed up! xD

[SgtSecsy94]

so the R72 is lipo ready?

[ramandhi987]

@SgtSecsy94 no it failed horribly

[JAAmusic2010]

could you try an Echo 1 Stag Arms M4?

[Fl4m3thro3er]

just get a kwa damn

[pert42]

lasted longer than i thought it would

[xaioguy73]

Why ish he rubbin da mag all da time???

[kooljosh56]

@xaioguy73 Because he's winding the Mag so BB's will keep feeding.

[xaioguy73]

Oh, ner saw one.

[CollossalAirsoft]

do more if this serires please will a G&G gr16 r4 stand a 11.1v lipo?

out of the box

[dobrien09]

@CollossalAirsoft no 

[CollossalAirsoft]

@dobrien09 hahaha i know but its a video i dea

[FloorKillazNixanDK]

Could a CA M15a4 sportsline with a proline motor stand up to a LiPo 11.1?

[PSOICA]

@FloorKillazNixanDK No

[deathpunish2]

Whatever happened to this series?

[YourN4m3]

well, for being a plastic gear box, it held up fairly well.

[SkateThe156]

is the G&G GR16 lipo ready is I put in a SP150 spring and a high torque motor?

[DXGROW]

can a gg gr16 raider able to take a 8.4 lipo???

[hobojoeisme]

What is the advantage of a lipo over a standard airsoft battery? Other than the fact that they are smaller, and have more voltage output.

[antb660]

are aftermath m4 carbins lipo ready

[killerhalo55]

@antb660 NO

[antb660]

@killerhalo55 what if there full metal

[killerhalo55]

@antb660 even if its full metal a lower end gun like an aftermath will not last to a lipo

[SNIPrA55A55INS]

would a cyma cm028 metal gearbox be lipo ready

[narutodavid2]

CrazyNCman if i buy a M4 3181 with a 8.4v what kind of smart charge should i buy and how do i use it? -beginner-

[XdarkdomainX]

3:05 albert and the chipmunks for the win

[Drumdudeck]

that sounds like my gun with a 9.6 in it. and on fast forward thats what mine sounds like, haha. if it has full metal internal parts, and has an active breaking mosfet, and is shimmed well, it should hold up just fine. im surprised it didn't strip every tooth off those little plastic gears

[Drumdudeck]

that sounds like my gun with a 9.6 in it. and on fast forward thats what mine sounds like, haha. if it has full metal internal parts, and has an active breaking mosfet, and is shimmed well, it should hold up just fine.

[ProgDrummerJDG]

I lol'd at the ceramic gearbox.

[glazuna]

so if i understand you correctly not all the guns can use Li-po batterys? Also i have to ask you, i head that you can ruin the Li-Po battery if you spent all energy in it... So RC cars,planes and stuff, they have limiters so they do not over spend the energy in the battery, but airsoft guns don't have this.

[Jackster1099]

sorry to ask but could the ICS SIG 551 handle a 11.1v lipo ?

[ProgDrummerJDG]

@Jackster1099

No, the only guns that are TRULY lipo ready out of the box are KWA's

[RandPairsoft]

Gonna go do this to mine since the hop-up O ring broke in it, never buy Crosman

[NIKE23ization]

what would you say an 8.4v battery is? good, fair, or bad

[ProgDrummerJDG]

@NIKE23ization

HAHAHAHA!

[LittleWing1127]

so i'm guessing that 7.4v lipos would be safe on most gearboxes, right?

[samlax77]

Good vid. No need for more douches to comment on your vids. Keep up the good work.

[iownudie108]

can a jg aks74 n take lithium polymer battery?

[jesbu1]

@iownudie108 nothing jg makes could take one

[iownudie108]

@jesbu1 how is that?? its a metal gearbox v.3!it seems that the only brand you support is tokyo marui? lol in that case u shouldnt make these vids.

[jesbu1]

@iownudie108 Huh? I never said anything bout tokyo marui! Just saying that jg internals will probably break down if you use a liPo battery.

[ReinhardSchuster]

every Airsoft is LipPo ready, use 7.4 V and everthing is fine.

Dont buy Battery Charger witch is less than 50€.

Use good LiPos, no Firefox or intellect...

I use Kokam or Robbe and they all work fine since over 2 years

[andromedarr]

How do LiPos perform in therms of possible Charges? In heared, that some LiPos can be charged only about 20 Times before they die, and others do not even loose capacity after 100 Charges/discharges

[WhoScopes]

hey guyss i need help, what would be the best battery for an ERES Tavor-21?

[sd90dash8048]

i can use a 9.6 in a stock jg g36c right? thanks in advance.

[pureWTH]

Is a G&G M4 MOE PTS lipo ready?

[behrgr661]

is the magpul masada pts lipo ready

[thisandthat93]

alright quick Q I just recently bought a G&G GR16 EBB. I plan on upgrading it soon and would like to know if its lipo ready out of the box and if not what do i need to do to make it lipo ready? thanks!

[supernitromaniac]

would a dboys m4 s syatem stand up to one i just got it for christmas and idk if it will?

[nobama08100]

Hahahahaha please make more "is it LiPo ready?" videos

[CozMiiK31]

wld a cyma fullmetal ak47 be lipo ready?

[krazyMotorcycleMike]

IF YOU PUT A 7.4 BATTERY IF WOULD HAVE BEEN FINE THE STOCK BATTERY IS NOT A 11.1 VOLT BATTERY YOU HAVE TO MATCH OR GET CLOSE TO THE SAME VOLTAGE YOU GUYS ARE NOTHING BUT RETARDS THAT MAKE THESE VIDEOS THAT SAY GUNS ARE NOT READY ITS LIKE GETTING A GEO METRO AND AND PUTTING A TOP FUEL DRAG ENGINE IN IT WITH THE STOCK REAR END AND EXPECTING IT TO HOLD UP

[crazyNCman]

@krazyMotorcycleMike No need to yell there douche wad. OBVIOUSLY a Crosman would not stand up to this type of battery.

[ajr1213]

@crazyNCman actually I have a crossman pulse r76 and I use an 11.1v lipo and it works great.

[ProgDrummerJDG]

@ajr1213

AHAHHAHAHAHAHAHAHAHH! AAAAHAHAHAHAHA! AHAHAHAHAHAHAH!!!!!!

[mexilover4ever]

@krazyMotorcycleMike geo metros are front wheel drive =D

[thedarklord2006]

@mexilover4ever L O  L

[2011airsoftfreak]

@krazyMotorcycleMike dude nc man knows more about airsoft than u so i think he knows

[adamdavidsson]

@krazyMotorcycleMike yea dudde takkeeeeee it easy he was fucking around with a fucking walmart gun with a lipo. i think everyone else but u finds this video pretty ineresting

[beastly789100]

@krazyMotorcycleMike some one is mad cause his sheap airsoft gun cant take a lipo

[wamda104]

fucking chipmunk lol at 3:05-3:08

[Ben15Man]

what if it had a full metal gearbox would it work then

[M05F3T]

ok.

i dont mean to sound mean or anything but seriously you cant just assume all guns are going to be like this when you use a lipo. All you really need to do to make your piston last is take the 2 teeth off... and you seriously are fine.. but you are testing it on plastic gbs?? Why? Who actually plays with plastic Gearboxes?

[ccowap15]

what will my baby look like?

hopefully nothing like you!

JK love your videos

[JimboSlice114]

i love this guy

[RcKyle2]

is a echo 1 mp5j lipo ready

[ccowap15]

@RcKyle2

no, echo 1's suck my balls

hard

[Aragard]

let your kids shoot with them

[DeathFeast16]

haha at 3:02 you triger like 400rpm :D

[BruceJBCpaintball]

that's why you get full metal

[Shaty1000]

we need more of these

[ilovetogame]

So, what makes a gun lipo ready? i have a src g36c that i have replaced with ares and systema parts (systema motor and ares high speed gear sets) do you thing it could cope?

[mysoccerftw]

do you know if a jg m4a1 could use a lipo it say full metal gear box sorry im kind of new to non wall mart airsoft guns

[kratos489]

are G&G combat machines able to use LiPo batteries?

[godwhitepk]

@kratos489 it can, but do you want your gun to break quickly?

[murlocman979]

could a CA m14 match be LiPo ready out of the box?

[crazyNCman]

@murlocman979 no

[murlocman979]

@crazyNCman

thanks broseph

[TheFamousDonsta]

@crazyNCman sorry to be a bother. but i want a high rof and i have a 2010 jg m4 s system. it mighht me enhanced i cant remenber. would it be ready? thanks so much.

[pipebillys]

@TheFamousDonsta Look inside the hole in the piston and check if it's either brown-colored or white/yellow. If it's brown, then you can use a 11.1v 15c and under. avoid 20c's unless it's a kwa.