Added: 5 years ago
From: Djsp01
Views: 271,089
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (259)

Sign In or Sign Up now to post a comment!
  • the only reason u werent going anywhere is because u knocked ur gearing out when u hit the curb genius

  • lol @ foot work... im glad its not just me that does that!

  • @blackerflash Im always driving it at myself accidentally :p

  • Comment removed

  • Comment removed

  • @Djsp01 You know why is broken??? Because 1st you must read the fucking manual!! :P

  • I gotkyozer fazer with a latest nitro engine, but I don't know how to start the car? I have the starter, and the glow ignitor is from the box.  I don't know how to use them

    I like the song from your video.

  • Hi is your kyosho fazer use 2ch 2.4ghz radio or 4ch radio?

  • Hi in the video it doesn't look very fast it's like around 40mph or below. I'd like one that can be much more faster above 60mph or more.

  • seems pretty zippy

  • Buy the FW 06 it's much faster and much more reliable!!

  • hello i got a skyline nitro car is 4 wheel drive but the front wheels only work do u no how i could fix this problem. thanks if u can help

  • i got the mercedes and it drives great!! :D

  • well if you drive like this after taking it out of the box then your fucking dumb and deserved that its broken

  • hiya ermm im having a problem with mine its the same one with out that air filter and when i give it loads of revs after a few seconds it cuts out if u could rb and tell me how to fix it i would be best please

  • what fuel do you use ? can you use unleaded ?

  • @x33yo0h of course not! U use nitro fuel!

  • do anyone know whats the stock high speed needle for the fazer?

  • I was out and drove my fazer today, I really had forgotten how fast it was. It seriosly blew my mind when I got the Air / nitro mixture right and tuned it i got it up to 102km/h according to lazer. ( I do have trip pipe and 2gears ).

  • how do i cut the hole for the started to come out of the shell?

  • The glow plugs are really small, they dont need to heat, it will start better if u pull right away.

  • i have also one with aston martin db9 body, but mine won't start, because i dont know they basic/factory settings:( i tryed some things, but who can help me?

  • what no crash well realy and i mean realy

  • Comment removed

  • Very good ! ... but no engine sound

  • the fazer is amazing and i have one too

  • i bought one of these cars but its running to high on factory settings, i think. what did you do first of all when you had this car

  • Comment removed

  • im gettin 1 in a few months its 169£ comes wif a mc laren f1 bod kit would it be worth the money and how many mph does it do???

  • i have one of these.....with mclaren boty kit......i'va mad some improves and now runs about 100klm/per hour!!!!!!it is really fast :)

  • just like to know after the transmition cut out when you hit the curb ,how did you fix it? thanks

  • i reckon it has the same issue as mine when i nearly hit a curb the brake disc locked up and melted to the shoes

  • this video was the reason my bro and I went out and bought one!!!!

    great vid! i can't belive how quick they are!!!!

  • they are very good for the size of them and the price :) i wish i was on commision, lol.

  • oh and.. i reccomend updating the servo's and control, i have a 4 way Acoms gun and servo's and the differance is AMAZING!

  • I got 2 Fazers, and have noticed they have Carby seal problems on them, and.. they like breaking exhausts easily, also.. they are pricks to tune.. id rather a 25 engine to tune than those 15's

  • 20sec glow?. wow.

  • damn! sick!

  • you need to break the engine in, temp guns are handy...

  • you need to prime the engin

  • yeah what reknios said is pretty accurate, at least with the fazer. my fazer was impossible to start the first time i ran it....after a week of adjustments it starts cold on two pulls and after running it for about 5-10 minutes it starts up with the slightest tug on the pull start. the guy in this video deff should consider lowing the steering sensitivity though

  • my drive shaft fell out on my 4wd buggy and i hate how 2wd nitro cars handle it slide so much .

  • Well about how quick it starts it depends.Mine starts at 2 pulls you just need to do the perfect adjusments to have perfect results

  • yeh it starts sooooo much better...

  • 5.23 w leb se puknij idioto. To nie telewizor zeby stuknac i zadziala.

  • 20 secounds glowing for better start.. ?! ^^

    what about NO ??

    My FW-06 starts in 5 sedounds inklusive glowing^^

  • where did you get this car and how much was it?

  • got them a couple of years ago for £160 on ebay

  • i got the scooby case but its electric

    im after a nitro but i need muney :P

  • Thats easy to ficks, i know =)

  • you are fucking stupid man.

  • what this car is bollocks.

  • Hi i may be getting one of these for 50 pound second hand because it keeps cutting out any help on trouble shooting that problem, thanks.

  • ajust your throttle cable and thats all

  • nice foot work the glow only needs 5 secs to get hot. you would get more charge out of it that way

  • my steering has locked on mine does any 1 know where i can get parts for it ?

  • Dude you have probably fucked your breaks, trying rolling it on the ground and see if the back or front wheels are locked, if so this is because you have frashed it with brakes on and the breaks have stuck. strip down the car and whipe the breaks and it should go.

  • cool

  • the breaks are really good on that car i must say XDXP

  • 1 speed not faster than my Tm G4RS with 12TR Turbo engine,2 speed more faster then cen ct5 and ur stupid fazer

  • that's true ;)

  • thx dude..so what rc u have..

  • i have the cenn ct-4 s it's very very good :)

  • that car is fast too...tune it will be fast as hell...i haved it las year but get hitted by a street car..it broke into small pieces... :(..u should becarefull..

  • Comment removed

  • i like it nice car.

  • that car is shit, schumacher fusion 28 is where its at. i wouldnt give you a £ note for those!

  • i wouldnt want you to give me a £ note, it's not for sale :P

  • Oh, btw, these are also ALOT cheaper than most other nitro cars.

  • they are alot cheaper for a reason it seems. ; )

  • @Grimbeast88 lol a pound note wat are you on

  • WAYYYYYYYYYYY

  • when it hit the kerb it knocked the brake and seized on. we just took it apart and put it back together and it is fine now :)

  • I have a traxxas jato trx 2.5. I reckon your cars would give mine a good run in for their money. nice cars keep uploading.

  • hii i've messed up little bit with my high speed needle valave can u give me the base settings please my car doesn't starts :'(

  • Turn the needle valve all the way in, than turn it out 2 1/2 times

  • never seen a cylinder in that design

  • iv just got the same car and have got the 2speed gear box for itit gives u 10-15 mph more!!!! its on ur maunles on potion part list, get it get it get it!!!

  • that ia amazing for a car that was not brokin in i spent one fool day pulling that goddam string on my inferodo gt. i got blisters on my hands. nice cars hav fun

  • lmao, i know what you mean about the blisters ;)

  • what controller is better the steering wheel one or the trigger ones plz responde ASAP

  • lol, they are the same ting, the steering wheel controller has the trigger!

  • nice im thinking of buying 1 of these wats the speed of them ?

  • about 65-70kph

  • seems to last for ages sometimes, i would say about 10-15 mins depending on how you are driving :)

  • wats the factory needle setinz

  • Hi. To the owner of this video and anyone that has a Fazer, i am looking to buy my first nitro car do you reccomend this car? because my budget is not exactly the highest.

  • Hi, this car is more than quick enough for a beginner, it is also pretty cheap which makes it a great car to start with, the only bad thing i suppose but it is the same with most nitro cars is that you have to get the mixture right and need to play about with it a bit, you might be lucky and it might run straight out of the box but more than likely you will have to "tinker".

  • yeahfazers are good to start off with and my scooby wrx started straight away have fun

  • hello, thanks for the council, are my first car and still I must learn very on these things you know I hardly have broken the transmission of the wheels left but they are pieces that little fortunately cost thanks for the answer, good year:)

  • hello! you do not have problems when from the gas to the maximum? I have your same model, but when to give gas the machine he skids on the left you know what could be? I have the dbr9, beautiful video:) P.S. excuse for my English, i'm Italian

  • hi, i think you mean the trim? you might need to turn the trim to the right a bit, this will make the car go straight.

  • is this part of the break-in period?

  • lol, no this was the first time we took the cars out to somewhere we could let them rip

  • It's easier to put the nut in the wrench and then put it on the shaft.

    When you start it would be better to put the car on a stand so the wheels can spin, it will result in less wear of the clutch. You should adjust the engine so that the wheels will just not spin when idling.

    I'm thinking of buying a car like that too.

  • on the one that was not moving i think the engine cog its not touching the spur gear

  • we have sorted it out, it was the brake siezed on :)

  • have you had any engine problems with this car?

  • no :)

  • oh thanks xd

  • where can i get one of those :]

  • we got ours from ebay :)

  • Heya, DJ you still got your cars? and you know Kurb magent? on the second video ( drift one) he has abit of metal on the side, I want this on the bottom of the car because stones flick up into it and get caught in the steering and it JAMS! :O thanks and deos it decrease the speed? please reply mate

  • speed is not really affected because it is ally plate so it is light, however make sure you have enough ground clearence!! dont forget as the suspension goes up and down it might "bottom out" and you will lose traction and steering!

  • Must calm down first! You need to chill man! Whatever you do DON'T PANIC! Then do it again this time carefully pick the car up and manually move the throttle linkage to open the carb just a bit. Let it warm up a bit then its ready.

  • heya people, my bludy engine wont start? I think ive flooded the engine :S what shall I do? i got it started once then i was excited so i took the glow plug out instantly n revved it abit n it just stopped? HELP PELASE

  • so its not flooded? just cut out when you revved it? because if u did then that what it does when u rev it straight away you need to get it hot 1st then you can start revving the hell out of it lol hope this helped

  • hey DJ, just wondering im going to buy a schumacer air filter, a couple of things will this increase the speed? and how do i fit it?

  • couldn't be easier, it just cable ties (come with it) onto the top of the carb.

  • hiya mate whts the top speed on these cars is tht what thr like out of the box w/b cheers

  • about 65kph as out of the box but a different air filter.

  • its a fookin fast one. get off ya cont.

    haha ausome

  • you want a fast on road get a CEN

  • heya guys im back lol, shall i get a colt or a kyosho because i need a FAST car sooo?? help please

  • what went wrong with the one car the transmition

  • It was the brake, it seized on, just took it apart and put it back together again and now its fine :)

  • heya im getting the same car but the Audi is it a good car I havw £200 to spend and watna tourer any good site please email me thanks alot and good vid

  • they are all the same underneath mate. so you can buy a shell to suit your mood :)

  • ha ha ha i was just giving you shit lol

    but yeah i own several r/c cars i have a t-maxx 3.3 a nitro 4 tec 2.5 a cgm yokomo drift car and a factory team associated tc4 yokomo has a brushless setup

    and an electric rustler that is pretty much stock.

    i was just giving you guys a hard time

  • fair enough ;)

  • hows the tmaxx 3.3 of yours ? i have one too finaly got it on some gravel and dirt in bridlington when i took it last week. quite a pain to tune lol but there awesome on gravel etc

  • yeah they are alot of fun i loved bashing the hell out of mine and popping wheelies all over the place. i just sold it like 3 day's ago to get a bunch of parts for my yokomo and a new charger for my batteries.

  • or just stop playing with toys

  • bunch of fucking wankers.

    you guys suck go electric or get a toys r us car .

    you wont fix a problem like the wheels not spinning by slapping the car dumbass.

  • hahaha, omg, who can't understand "humour"? whe knew it wouldn't fix it, it was the brake siezed on. As for toysrus, these are toys you idiot. Only costing £120 built and ready to smash these ARE toys. Get a car you have to build that costs over £500 and i might agree with one of your comments. Thanks for your views anyhoo.

  • hi

    have you had problems with the engine that when it accelarates it conks? any help appreciated

  • if you haven't run it in propally it can do that, or its just changing gear or you have a drive shaft creating friction somewhere in the drive system

  • electric is so gay, if your gonna play with rc cars ya need some combustion. otherwise it is a toys R us

  • can i still buy a kyosho fazer or they dont sell it anymore?

  • try ebay if your local hobby store cant get them :)

  • i cant find 1 fazer on ebay... :(

  • i take it you are not in uk then?

  • no im in portugal :(

  • BenEyah:Is your fuel ratio right? Normally if it isn't the correct fuel this happens. Also, to help this start the engine, drive 10 metres, then turn it off. Repeat 5 times. Also, you may need to break in your car. Let it run full speed, and do some large wide circles. (Dont do this on grass.) Failsafes help too. Mount your failsafe, and if the actions of the car is the same, you can turn the control off and the car will cut out. If this doesn't help, get specialist advice. Hope it helps.

  • can sum1 help me wen i start my car it starts fine n idles then after a few seconds it starts to go then keeps accelerating to full speed whats wrong please help

  • your failsafe might be wrongly configered

  • "Heat the glow plug for 20 seconds, it starts better"...

    Haha, no it didn't:P

    Should start on the first pull! Mine does everytime.

    1. Apply full throttle

    2. Prime until you see the fuel by the carburator

    3. Prime ONE more time

    4. Attach the glower

    5. Pull the starter!

    It should start at LEAST at the second pull!!

  • anyone watching this and getting board, go to 8:50. AWESOME!!

  • lol. that was funny. 'heat the glow plug for 20 seconds. it starts better'. with the stock glo plug heater i start it on the second pull

  • a glow plug is a device screwed in at the top of the engine that ignites your engines piston to start the car. If your car doesn't start because of the engine cool temputures, use a hotter glow plug. Hope this helps!

  • whas this the first time you startet them and drived whit them, if it was you are doing it wrong... the first tank the have to stand still whit no gas. second tank you can give a little gas.. and third tank about 50 % GAS.. fourth tank you can run it up too max speed... (:

  • Wh'd you cange the Needle Valve?

  • it was running too fast

  • hey can someone answer this please. what is a glow plug? what does it do?

  • The plug is the part that ignites your fuel.

  • oh thanks

  • imagine real cars be fast as them in real life

  • new cars are a pain

    check if all the screws are tight for compression and also check if your glow plug is working

  • hey, i just got a nitro rc car and i'm having difficulty starting it, i have managed to get it started twice in the week that i have owned it, i understand that new cars are hard to start but i feel this is over to top. can anyone give me any advice?

  • get the traxxas ez start

  • try the carburettor main valve

  • well, did u do the break-in properly? do what he said. take out the glow plug then test it. also try keeping the glo plug heater on the engine after u start it for abt 2, 3 seconds n set the throttle trim a little higher when u start the car. after u run it for abt 30 seconds bring it down. also tune the car 2 get better throttle responsiveness

  • Could you be a little bit more precise? Search in google, you will find lots of information about carburation issues, break-in procedures, starting methods... which could be the causes for this. Probably it is because there is not enough fuel reaching the engine. There are plenty of forums and websites which could be useful for you.

  • lol your tags "boobs" and "ass"

  • lol, it got YOU here ;)

  • you can go to hell stupid asshole

  • I have 1 and i dont have that mutch smoke coming out of mine is mine wrong or yours, nice vid m8

  • I got also much smoke when the my car was new, but now, after some driving it´s normal as all other cars.

  • yes, i think when new they do smoke a bit but once run in they seem fine

  • It should smoke when running - these engines have lubricants in the fuel. If there's no smoke, it's running too lean, the engine will overheat and seize.

  • there is nothing wrong with buying a danm car off ebay.. imagine u bought a new car that cost 300$ and then u went on ebay and saw the same thing for around 100?

  • nicely put

  • when you say fist time out, that wasn't the first start was it?

  • correct, it was just the first time we had been on a car park with them. having never controlled one of these things we were just noobs messing about. these are brilliant for noobs like us just to get into nitro.

  • lol same with me but with diff car. theese things are so easy to use. no need to be a frickin expert because after all its how we learn :P

  • This car is slow.

  • and what is wrong with buying goods from ebay? i can see a lawsuit comin. LOL

  • The music?

  • "the race" by yello