I own many HT radios. I recently purchased the Wouxun KG-UVD1P on Ebay for $105 USD. The items was purchased from RadioAccessoryShop in Hong Kong and was shipped to my location in Ohio USA in 8 days! For the money this is truly one heck of a radio. This is the perfect radio for a beginner HAM or GMRS users. Programing the radio is a breeze if you use the software and cable. My only recommendation is getting a longer dual band antenna. No issues to report so far
I want to make my own USB cable for wouxun KG-UVD1 P and i need the pin-out diagrams so that i can connect it to my transceiver. Can you help me on the pin configuration.
When I look up my arrl repeator directory it would say repeater freq 146.8650 ,repeater input - negative, ctcss 146.2. My question is on the wouxun software. the rx freq, the tx freq, the decode and encode. Where does the arrl info get placed within the wouxun. The ctcss is the encode or decode and is the repeator freq of 146.8650 the rx frq?
You don't need to go theouh all the extra headache in the control panel and device manager to figure out the com port unless you have major problems or a "read/write failure" and even then, check everything else first, plug seated all the way, etc. But, 99.99% of the time, you will not have a problem. Windows picks the com port as soon as it sees the USB cable and the
Wouxun("oh-sheng") programming software finds the correct com port as soon as you start the software. But good to know still.
@ytTaz480 Actually, you might have had to do that com port stuff with the very first software but any newer or updated software you get now, you won't have to deal with all that.I've used 3 different versions of the software and never had to deal with the com port. It takes care of everything on it's own.
Great vid! Just a comment on connection failed message. I had a terrible time with those failure messages and finally determined it to be the radio end of the cable. A little rubbing alcohol on a cotton ball cleaned it right up. Hasn't missed since.
Nice video, but I must add a detail: Wouxun is not pronounced as wou-xun but in chinese it's pronounced as wou-shin (quite similar pronounciation as the word "ocean" in english)
Nicly done video. You are right.. ALWAYS do a read first. I use Windows 7 and have had some issues... BTW: COM4 is not *always* the port it finds... BUT again, I use win7, so you may be right.
Good tutorial... Perhaps you will give a review of how your radio works and all that... Hey try AO51 and AO27 satellites :) Yes... the HTs work on them :) 73 John
This has been flagged as spam show
I own many HT radios. I recently purchased the Wouxun KG-UVD1P on Ebay for $105 USD. The items was purchased from RadioAccessoryShop in Hong Kong and was shipped to my location in Ohio USA in 8 days! For the money this is truly one heck of a radio. This is the perfect radio for a beginner HAM or GMRS users. Programing the radio is a breeze if you use the software and cable. My only recommendation is getting a longer dual band antenna. No issues to report so far
KD8EGV 3 weeks ago
i was hoping to get an answer
thanks
dipendraraikut 3 months ago
I want to make my own USB cable for wouxun KG-UVD1 P and i need the pin-out diagrams so that i can connect it to my transceiver. Can you help me on the pin configuration.
dipendraraikut 3 months ago
Thanks for the GREAT video! Just got a KG-UV3D and your video sure made it a snap to program the radio.
73 The Old Gator
THEOLDGATOR1 4 months ago
can anyone tell me how to put a space in the channel name? i read it somewhere but forgot where it was or how too.
ENC016 5 months ago
@ENC016 I read that you have to use a "-" dash or minus sign... but i have not had luck figuring it out. let me know if it works for you.
blewbot 5 months ago
When I look up my arrl repeator directory it would say repeater freq 146.8650 ,repeater input - negative, ctcss 146.2. My question is on the wouxun software. the rx freq, the tx freq, the decode and encode. Where does the arrl info get placed within the wouxun. The ctcss is the encode or decode and is the repeator freq of 146.8650 the rx frq?
laurak59 6 months ago
You don't need to go theouh all the extra headache in the control panel and device manager to figure out the com port unless you have major problems or a "read/write failure" and even then, check everything else first, plug seated all the way, etc. But, 99.99% of the time, you will not have a problem. Windows picks the com port as soon as it sees the USB cable and the
Wouxun("oh-sheng") programming software finds the correct com port as soon as you start the software. But good to know still.
ytTaz480 6 months ago
@ytTaz480 Actually, you might have had to do that com port stuff with the very first software but any newer or updated software you get now, you won't have to deal with all that.I've used 3 different versions of the software and never had to deal with the com port. It takes care of everything on it's own.
ytTaz480 6 months ago
Great vid! Just a comment on connection failed message. I had a terrible time with those failure messages and finally determined it to be the radio end of the cable. A little rubbing alcohol on a cotton ball cleaned it right up. Hasn't missed since.
mickeyzee43 7 months ago
very nice, i've got to buy the cable, setting up channels directly from the radio is a little messy
BlackAdder719 8 months ago
I have programmed to the frequencies to my county bands and I get the message Channel 1 Message out of Range. Any idea on how to fix this?
ClaytonCowboy 8 months ago
@ClaytonCowboy i've got this one too, I don't know how to figure it out
BlackAdder719 8 months ago
Nice video, but I must add a detail: Wouxun is not pronounced as wou-xun but in chinese it's pronounced as wou-shin (quite similar pronounciation as the word "ocean" in english)
XerxesArtifex 10 months ago
Nice video. I have yet been able to get mine programmed yet, it will not work what so ever on xp. Gonna try my luck with a vista machine in few days.
ANyone have the most updated software and drivers for it?
Thanks
w8srb 1 year ago
Hello i have a Dynascan DB-48, is it the same software??? Is it possible to programm frequencies like 470Mhz our 119Mhz??? Thank you
vitommarques 1 year ago
Nicly done video. You are right.. ALWAYS do a read first. I use Windows 7 and have had some issues... BTW: COM4 is not *always* the port it finds... BUT again, I use win7, so you may be right.
Good tutorial... Perhaps you will give a review of how your radio works and all that... Hey try AO51 and AO27 satellites :) Yes... the HTs work on them :) 73 John
johnlwilkers 1 year ago