New 2010 Belt CP CX-450 Scale Brushless Helicopter

[MWylde]

This model is capable to do 3d flights like the Belt CP V2? Thanks!

[xhelicopter]

@MWylde No you won't be able to do 3D flight with the CX-450

[JDALSystems]

loose the music in videos. No need to add special effects. Plus we like to hear it. 

[fabbeboii]

@javamochacocoa yes it will if you want it to

[LaxBros4Life]

How come the blue version is $25 more than the red version? Seems a bit odd...

[yamaha4759]

@LaxBros4Life that doesn't make sense... $175 vs $199?

[06789679]

thx

[06789679]

can someone tell me whats an esc upgrade?

[lordlapswans]

@06789679 ecs = electronic speed controller and you can choose how manny amp it can handle , so a bitt overkill on the esc is never a bad thing ,To little amp and the esc gets overheated and breaks or shuts off

[javamochacocoa]

will it fly well upsidown? thanks

[TheBeatSmith]

So...what is the difference between a brushed and brushless motor?

[paintballer2818]

can you use the imax b6 charger with the stock batterys 

[davesofresh84]

@xhelicopter how far away can the helicopter be from the user?

[ironvlts1]

does exheli had a store in japan??

[xhelicopter]

@ironvlts1 no stores.....yet

[Ffrozen12]

Esky Belt CPX 3D Hi can u teach how to use the normal remote Plz I Have difficulty plz do a viedo

[Ffrozen12]

Esky Belt CPX 3D Hi can u teach how to use the normal remote Plz I Have difficulty

[dennikb]

LOL 2:11

[fuzzyrhino5]

if i get this heli is it worth it to buy a cnc metal 450 head and tail head upgrade? or will the plastic (im guessing polimer) hold up fine?

[johnken62]

How much does it cost in Malaysian Ringgit?

[johneyrico]

hey m8 im looken at getting one of these soon, would u recomend it or should i look at one of the smaller walkera heli's?



[medinaaob]

When are you guys going to have this helicopter in stock????

i cant find it any where !!!

[HappySCVResident]

Great prices...but don't ever expect to call them for service because they won't answer. They simply want your credit card number to take your money...then they wan't you to go away until you're ready to buy something again. No support at all.

[sjiyuey]

is it for beginners? how long does the battery last?



[Afrocanuk]

5:25 - What does he mean by "Check the trimming?"

[MrDave709]

This heli can be flown outdoors?

[TheNoahHa]

ToO. x(

[TheNoahHa]

Great video. Now I have the Belt CP to.

[TheFlightLog]

Can this helicopter do this basic 3d manuovers, like rolls, inverted and loops, basically, can i do sport/mild 3d flying.

[hungryhungrypiranhas]

I want one on black friday but it is not in stock =(

[gtoracer22]

any suggestions on tuning this thing, or is one of those just play with until you have it to your touch?

[HeliDragon510]

Even though you folks sell these, I feel like this was a good honest review. I have been thinking about getting a Belt CP V2. It looks like the Rx is easy to replace with something else? Would it be possible to buy one PnP and install a Spektrum Rx in this heli? Thank you...

[ichigoxr27]

what is the cost of this very devine toy in dollars

[alishanmao]

Very good Review Tony. Don't you think it would be awesome if ESKY put that 3 blades main rotor head on this one :D that will make a unique heli. But again ESKY has their own unique way to just change the shells and call it a new heli :D.

[filip500filip]

could you fly it in 3d like cp v2

[tangent123456]

how long does it take to recharge the battery? :o and how much is the max flight time, if i stay in air all the way till the battery is dead?

[DedmonStudios]

voice crack at 2:10

[hiten7227]

will u pls tell me its price in indian rupess

[xhelicopter]

@hiten7227 you can google the conversion

[dbailey3887]

@hiten7227

199.00 USD = 8,895.30 INR 

[dbailey3887]

@hiten7227

199.00 USD = 8,895.30 INR

[James53414]

xheli i love it and their helicopters are way to cool

[xhelicopter]

@James53414 Thanks!!

[rcguy4373]

ok how much $ and what about replacement parts?

[motoballz]

Yes, I'm an asshole.. Being an asshole i have to point out your voice crack :)

[eltonduet]

how would you compare the cx-450 to mt Innovator md 530 would buying a cx-450 be a step backwards?

[daddydaze8]

i love xheli people they're great

[xhelicopter]

@daddydaze8 Thanks!!!!

[adolz1000]

is it o.k to paint the blades?

[xhelicopter]

@adolz1000 not recommended to paint the blades on these helis since they are wood and have a layer covering it

[fuzzyrhino5]

@xhelicopter what is the rpm on this heli i would like to give it a new fuselage and i was thinking about the 450 size apache fuselage on xheli.com but i heard for that one u need xtra rpm rate and a 4 balded rotor head.

[ironvlts1]

@xhelicopter does ex heli had a store in japan??

[MrCudaguy1]

how stable is it, would it be good for a beginner who can fly well on a good sim like fsone? i really want a 3d heli that looks scale and is under $200 because i dont know how well i can fly one yet, im great with planes, but helis are totally different, so i need advice.

[Vbluguitar]

@MrCudaguy1 You might want to start of with a simpler heli like a honeybee v2. You may spend a little more in the short term, but the money you will save on repairs will be cheaper in the long run. I am currently flying an mSR and will move to the HBV2 soon. After I am comfortable with the HBV2 I will move up to this heli. I love the scale body too.

[PHeMoX]

@Vbluguitar That's a good idea, but you could also consider going for the Belt CP CX at once, if you're able to fly your mSR without ever crashing. You'll need to adjust to hovering with a bigger helicopter, but I think it's doable.

The mSR already provides a very good learning base for the next step (CP). Just my 2cts, if you're more comfortable flying the HB FP2 first, then I wouldn't want to stop you. It's an excellent choice.

[Powershotknecht]

perfekt Movie!I like the made your movie!

[FlyingFighter]

He likes the red one x)

[betofazzo]

I will buy one, i like the scale look and the e-sky helis..:) regards

[betofazzo]

Nice report Tony, why you dont go outside?...Regards

[xhelicopter]

@betofazzo It's been too windy here to be flying the smaller helicopters outsidelately so we flown it inside in a big warehouse instead :)

-Tony

[PHeMoX]

@xhelicopter Will you or could you make another video of it flying outdoors please? I'd love to see how it handles a small breeze or a bit more wind.

[bluehazer]

Tony? What about the Walkera F450?

[xhelicopter]

@bluehazer Soon! :) its been raining here in California with rough winds

[notasixpack]

Great video.. a little too much 'stutter' editing. I know you guys were trying to be in step with the music, but I kept thinking something was wrong with either my connection or my computer. Maybe I'm just getting too old.

[notasixpack]

@notasixpack OH WAIT. maybe it IS my connection. HA!

[xhelicopter]

@notasixpack haha, noted.

[manuelbeltranmeza]

Nice fly, greate tips.

saludos desde México.

[shangsandy87]

Don't like the music and beat in the middle, scare me out, thought the heli crashed.

[RCSuperPowers]

Wow, cool! Hey... this guy looks just like the NitroPlanes guy.

[shangsandy87]

@RCSuperPowers Yes dave, Tony is the face of xheli, nitroplane, NCX, rcdiscuss, hobbypartz............Omni-pot­ent Tony.

[shangsandy87]

@RCSuperPowers @RCSuperPowers 

Btw, how come no more new videos?????????????????????

[kemobaa]

love the vids.....but is there any heli that you don't like?? i am a newobee

[alfwok]

This was a step above the usual video awesome job...cool shots cool location cool music cool helicopter

[vfatnuts]

Tony once again very nice flying lol Now bk to when are u going to get me a T-shirts lolol

[miGsKills]

That looks like THE perfect place to fly RC Helicopters. I wish I had an abandoned parking lot/warehouse near my place :P

[jauchiu]

Good job Tony. Nice helicopters, neat video. Great review.

[rambo45889]

been waiting to see this thing fly :)

[3255959]

what no 3d fly