turbo hardbody 2

[luccerio]

4 cyl no way nice i like it ,,,, did you do anythin to the engine itself like the piston,rods, or the cylinder heads or the cumputer ? ill like to know cause am thinkin of installing some stuff on my d21

[mrslick789]

is the tranny in there the stock trans if so did you have to do some retrofitting or the engine fits right in?

[txgato]

that intake plenum is crazy!!!! that intake is over kill juding by the t3/t4 hybrid lookin turbo

[bbvfdcheif2]

get a real v8 like a 383 and drop it in there with a turbo 400 thats what im going with mine once the engine blows

[frodo70444]

@bbvfdcheif2 wtf? u do know he had a 4 banger in that thing right?

[coldfuzionzxx]

What`s the diffrence between the SR20DET motor and KA20DET ?

[idiot4rent44]

@coldfuzionzxx its a ka24de not 20 and to me the ka24de is a more reliable engine plus the cast iron block and crank hold more power plus it has .4 more liter lol the only problem with the ka is the airways are kinda choked but with a good port that solves that problem plus ka are easier to come, and the sr has valve problems under boost so i say fuck sr go KA lol

[jaindls]

@coldfuzionzxx No such thing as a KA20DET, there is a KA24DE, if that's what you are talking about.

[Suprakidd1]

@coldfuzionzxx first its ka24de-t ka is a 2.4 liter naturally aspirated engine. sr is a 2.0 liter turbo engine. other then that is mechanical differences

[wise185]

how hard was it to get the ka in there? I have a z24i currently and would like so swap it out.

[killakev0491]

G. Shut the Fuck up Honda fanboy.

[blowintreez808]

gang up on hondas? c'mon stock hondas would rape ur nissan's (all day all night) the ony reason u running your mouth is bcuz your stuck with a crappy ass slow truck and probaly can't afford a honda anyway. by the way i got big fat dick for your mouth fucking queer!

[DeeeJayThrash]

@blowintreez808 ahhhem nissans are more costly than hondas, we make torque unlike hondas and why you looking at a nissan video for fag honda driver who doesnt know what torque feels like

[GCampbell44]

whats the best source of info for the ka24de swap into a ka24e hardbody? what are the differences between the 240sx ka and the frontier ka? i assume the ecu used would be from whatever the engine is from? is the S14 the best one to use? i would assume so.

[GCampbell44]

oh. also, i have a new garrett gt35r originally meant for my sentra, butid like it on a built ka. i also have local fabricators to do the exhaust and ic piping, so thats not an issue.

just the wiring and whatnot. did that motor drop right in?

[DHISKEY4U]

that intake mani is useless unless your making mad power its prob robbing power

[katillidie]

wow who says i wasnt....

[mmmurmomspie]

@katillidie that baby turbo you have on that says its not.

[captubb]

Sounds a little rough ha,

Why the hell are people freaking out over a V8 in a nissan?

[katillidie]

can u not read.... it was open turbo!!!!

[lzows]

@katillidie doesnt say anything about an open turbo

[bigdaddylovestori]

@captubb dude its not a v8...notice its only 4 cylinders...

[DeeeJayThrash]

@captubb KA24's are 4 Cylinder engines not v8

[killakev0491]

lmao thank you, i only speak the truth my brother

[killakev0491]

why ppl arguing bout NISSAN swap's. we should not gang up on each other, we should gang up on honda beacause they dont deserve to race, and should be put out of their missery. Honda sucks dick, n Nissan guy's need to prove it. thats what im doing

[katillidie]

wow what have i missed

[krispyS13]

@killakev0491 if u started a church i would go to it..amen bro thats wut im talkin about

[80857473]

@killakev0491 What the fuck? Do you even consider yourself a car enthusiast? Your a disgrace to all tuners.

P.S. grow up.

[Pyrex42]

@killakev0491 nah dont bash honda, bash american cars! ive owned 3 nissans and an acura and the acura was the fastest stock

[Nolanator6]

@killakev0491 dude, theres nothin wrong with honda's, its just people that are passionate about a certain type of car, just like you like your nissans

[jaindls]

@Nolanator6 I agree 100%, and I drive a 240.

[IraqiBomber116]

@killakev0491 Totally agree Hondas are shitty, Nissan FTW

[frodo70444]

@killakev0491 yes down with wrong wheel drive honda id rather drive my rusted out datsun with 74 hp than a turbo honda

[ecosby100]

@killakev0491 ya but id never buy a new Nissan pick all the frontires have tranny problems idk about the new ones but the old ones like 2000 to 2005 do i new they guy who had two of them and they both grinned in 3rd gear and i think that why they sell so cheap used compared to Toyota

[iLLusiveX]

forced induction is the replacement for displacement kthx

[cwinsett86]

Forced induction is the replacement for Compression.

[initialdrifter666]

How hard was the wiring for this swap because I know the hard body already comes with a KA but its throttle body injected if I am not mistaken.

[katillidie]

well considering i had a good friend of mine rewire the whole truck, not that bad but thas because i wanted it clean... but, originally i just took the complete 240 harness and swapped inmto the truck

[ashylarry1986]

did you have the KA in it already? why did you turbo that instead of just swapping for a sr20

[katillidie]

i had the ka it was in my 240sx... and i didnt go sr20 because they are trash.... sr's suck and i will never own an sr.

[jaindls]

HAHAHAHAHA how do SR's suck?

[katillidie]

no replacement for displacement..... ka is just an all around better motor, yes it may not have come turbo but it should of.. and if the U.S didnt have such gay emissions rules it would have been...

[jaindls]

Okay. So you're only reason that you would pick a KA24 over a SR20 is because the displacement. I agree with you on there is no replacement for displacement, BUT that gives you no right to say a motor is trash, and they suck, and you will never own one. That's just stupid.

[katillidie]

everyone i know that has had an sr20det, has had major issues and or blown them up and went back to ka.....

[jaindls]

Well then you're friends don't know how to install an SR20 then. They probably wired the harness backwards or some shit. I've never heard of a lemon SR20

[katillidie]

they are all lemons.

[jaindls]

I have never heard of one lemon SR20. I haven't heard of one problem. I think your friends just didn't install it right

[youngkarlton]

Ive been driving the piss out of my sr20 for 6 years now with no problems...

[twistymcslide]

why do you think they make it to the states... they were in a wreck( often throws timing and or hurts chain guides) , high milage ( keep trusting 30-40K miles, i guess you fail to notice they all say that ) . ivew built 30 + sr's and 6+ vh45de , i love the sr too , but get real , id never just throw one in and hope... also , for the price you pay for a questionable motor, a KA can be built almost. to each there own, but come on...

[jaindls]

I guess you don't know that in Japan if you've had the same car for over 5 years the taxes go up, an engine swap is considered a new car. I could sit here and talk shit about KA's like the fact that they are a low revving truck engine. But why does it fucking matter? You think KA's are the fucking shit, I don't. Leave it at that

[twistymcslide]

im not partial to either , i just didnt appreciate the way you spoke down about them , theres plenty of pros and cons to any engine set up , and my points were valid , as were some of oyurs , but for oyu to incinuate and make general statements made me comment back . and lets not try to talk down to one another , i have plenty of hands on , and only so much info can be thrown into each comment . i rev my vh45de to 8500, and its meant to be in a luxury car , but its not , its in my 240sx

[jaindls]

O my god, dude, I don't give a fuck about what you've done with a damn V8 in a 240, yeah, I bet Nissan copied you too, I bet you made the KA and they thought hey he looks like he's half way good at mechanics, let's copy him! Don't care. I absolutely HATE V8 swapped 240's so I could give a damn

[twistymcslide]

so basicly your a dick...got it . thanks for clearing that up. LOL...your a punk.

[jaindls]

Yep, sure am, especially to know it all proud full people like you. I WAS THE FIRST TO DO THIS!!!! THEY COPIED ME!!!! I don't give a fuck

[twistymcslide]

i was the first in the Us to put the v8 into the s chassis , and the first to do the 300zx 5 spd trans swap onto the v8 . . i dont use any mass produced ( mazworx ) adapters, because they copied me. so thanks for the attempted tutorial ... search " the 450sx " thats me. im not your avg nissan enthusiast ...

[twistymcslide]

meant vh45de when i said v8.

[elgrandechorizo]

thats a very nice truck man.. ive got an 89 with a z24 and i was thinking of doing this swap.. do you have an estimate of how much this cost?

[katillidie]

lol it cost me nothing cause i already had everything to do it and i did everything myself... except the wireing

[anmp1]

yo did u have ne problems with the motor mount nd the top mount manifold cuz im doing the samething on a ka24e but im worried bout clearance with the motor mount nd the manifold

[katillidie]

nope everything worked perfectly

[datsundrift710]

dame ya your kadet is fucked up that one bad sound

[katillidie]

u people suck at life, how many time do i have to say its loud and sounds like that because its open turbo....

[andrescaraudio]

great engine, but ka's doesnt sound so good

[katillidie]

can u not read.... its open turbo... no downpipe, no elbow... just an open turbo,

[andrescaraudio]

I know I got a KA-T too but all my comment is that I personaly dont like ka's sound

[eviljester1987]

im working on getting a nissan blue bird head and turbo for my 88. should be sick.

[katillidie]

its a Ka24det! jackass

[LUSKANDREW]

sorry 98- in the hardbody had the dohc 97 down had the sohc but its a real sweet ride and screw sr's i hate them gotta have my tq

[LUSKANDREW]

it a ka24de 240sx 91 up some newer nissan trucks had it, frontier ect..... sweet ride

[lowriderkillers]

what car was it out of becouse as far as i know the 240sx wasnt a det? maby it was

[katillidie]

240sx... 91-98 came with de

[katillidie]

thanx. i loved it till she had to go

[edd707]

ur my new hero. i want that in my nissan hustler

[2ndmoto]

What did you do about the oil pan and oil pick up tube? I was looking at doing a de swap, but there is a clearance issue, something needs to be modified to make it work

[katillidie]

nothing.... it all stayed stock no clearance issues

[fastassevo16g]

sounds like the motors shit. is it knocking? nice work though i wanna try that

[brentwoodbc]

I think that is the cam.

[katillidie]

no cam just open turbo

[katillidie]

not knocking, its open turbo! no downpipe at that time.

[katillidie]

thanx man but unfortunatly i had to get rid of her i took the motor out and it went back into my first love a 240....

[PoconoPits2008]

Thats pretty cool man! At the drag races I seen something like this but it was with the original Ka24De that comes with the truck. I wish I could have found a turbo for mine when I had it! The fucker ran 11.25 1/4, nice work I havent searched all your videos yet but id like to see how the baby runs!

[katillidie]

didnt buy it! made it from scratch

[nismomendoza]

where you buy that intake?

[katillidie]

had it made at the local machine shop

[7292jose]

nice truck i learn ho to drive in a 92 nissan hardbody but man nice truck keep up the good work

[staske]

it makes me sad that u wasted that money on a truck.... y didnt u just buy a 240sx and turbo it?

[katillidie]

ha thas funny, the motor was originally in a 240 that i pulled out and put in the hardbody... i have had 23 240's i wanted something new and original..and i didnt waste a dime i had everything and did everything myself.

[staske]

thats dope that u did it all yourself successfully. i just dont care for the truck at all

[MustarDmAn656]

is it hard to do this swap?? im lookin to do this to my 86 v6 hardbody and i wanna know where to get all the right stuff to do this

[mrZdude]

do a VG30ET on your V6, IMO.

[Gogolinskiy]

man keep you v6,correct me if iam wrong but isnt 86 a vg30e?anyways if it is,then 156hp and 180+ tor,is more than enought,why waste money?

[Karl90C1500]

looks sweet, Im looking at doing the same thing. Nice project, hope to see more videos of it

[Insanity2582]

s14 engine in a d21 pickup. NICE!!!

[boiracerxx]

Nice, I been wanting to do this for awhile.

[fastcarkid24]

are the 240 a good car i was going to get a eclipse gsx but the 240 r nice

[fishman231123]

ive seen it the 6 cylinder model is a vg30de nonturbo 4wd but you must mean the 300zx twin turbo not yet but im sure someone has done it it would be a great swap for drifting(hondas ans nissans forever)

[TokesMcpotpuffer]

sounds like shit

[katillidie]

yeah maybe because its open turbo douche

[TokesMcpotpuffer]

so u agree that it sounds like shit... hmmm u should prolly fix that faggot.

[katillidie]

did u see when this was osted u ass... its fixed

[TokesMcpotpuffer]

who the fuck pays attention to when it was posted and quit talkin like ur a hardass, ur not impressing anyone

[katillidie]

seriously i'm just firing back, why are u talkin like a hardass. ur not impressing anyone either!!!!

[wise185]

kids really dont understand how much easier it is to turbo a motor thats already in the car. and ka's put down way better numbers then sr's now sr20 na vs ka24de na the sr20 will put out more power.

[jbpaintballer05]

in a way I understand what you are saying but one thing you have to take into consideration is how many miles is on that KA, when you can a buy and SR20 with around 40,000 miles on it

[graffiti5]

Those days of the 40k sr's are over. Unless you buy a clip, you are getting a mystery motor.

[katillidie]

why go ka? well because the SR is a pos.. for the dame money u spend on a sr u can turbo the ka and have more HP and TQ at the same psi... the ka is just an all around better motor. ka-T ftmfw

[killersushi99]

KAturbo...why abuse yourself? Put in a SR20 with 1/2 the effort. But hey whatever floats your boat.

[tremer88]

i see you got on the tractor tune

[twofortyrida]

Whad up Nick. See ya got it running. I can't wait to see it in person.

[nissantrucking]

awesome, this is pretty much what i plan on doing to mine someday, though i'm running the older ka24e . As long as you don't drop the suspension you've made my day, if you get this response, i would love some pointer and any info on special modifications you had to make to get the turbo to fit the truck.

[nx2000det]

Cool nice i like too see different things done its refreshing...

[KeViNsilvia]

yeah i know man

[240trooper]

sleepr