Setting Up A DriveRack PA

[DJCHELOMIXX]

you can put captions to your videos in Spanish I am very interested please

[spiritualcycle]

Can this be used for recording? I have the Yamaha HS80M. No Amp.

[inlovewithmusic09]

can we drive mono 4 way line array with driverack 260 ?

Plz lemme know asap

[DownhillingGuitarist]

Very helpful - thanks for putting that up - and for traveling to so many cool places to make the video :-)

[bondo1955]

why turn down the left channels on your amps

[rclark381]

such bad advice on so many levels. never ever boost the graphic eq!

[kk6downing]

Thumbs up for push the next page button

[80219jesus]

it help me a lot , thanks!

[thedjfantastic1]

question when you use the rta mic to set up the eq does it set up your compressor and limiter also or just the eq and if not how do i set up the compressor and whats a good point to set up for a live dj performance

[djletomegasom]

ola algue pode postar uma video aula do dbx driverack pa em portugues?

[Rockbuon08]

Whats the power requier for this Driverack,

There iis any shut off cause of lack of power?

[fyred1]

What do I do if I'm using only one pair of full range cabinets?

[EarthLifeSystem1]

Press the next page button

[elove5]

Our sound system is a little odd, we use two QSC to a dbx crossover, one goes to 2- 18" JBL woofers the other to 2-Mackies, BUT we have a couple of Samson's self powered towers (215 and horn) to reinforce sound and another couple of Samson's powered (212 & horn) that we use as monitors; can the driveRack PX or PA+ help us set-up?

[natere2]

LOL nice leather jacket and shades cool breeze!



[vancouverdogdowncast]

what do you do if you want to plug in more than 3 amplifiers. theres only 3 outputs. lets say i want to use 9 amplifiers altogether. 3 for hi, 3 for mid, and 3 for low. how du split the signal?

[toolband1123]

do u need high mid low amplifiers?? or can u run direct from the DriveRack to the speakers/ subs???

[djmisteralexxx]

Can this work whit sefpower speakers?

[balkipapek]

@djmisteralexxx Yes. You just plug XLR right from PA+ to speakers.

[SmokinDaveWolfe]

the audio on this video is very low and dull... i think he needs a 882 sonic maximixer...

[swiftnsassy]

I dont have one but Im thinking I need one and I will have to return back to you for more info you seem very knowledgable and wow nice video editing did you do that too?..Im adding you ..ok

[marlene144]

Hi there , already have the DriveRack PA ..but now I'm using RCF active speakers will it work ok ...I note there is a PX also !!

[KeivReynolds]

Hi,

My band has a Dynacord P5 system with the Dynacor PM2600 system amp, this has iys own built in crossover for the system. Can this be used without using the crossover, so just using the eq's and other effects?

Cheers! :D

[djroxc]

Is there a master input or output gain for each channel?

My tops are set way too high compared to my lows. It does not ask if you have your high amps on bridge mode. Only your lows. I'm running four amps all bridged. QSC RMX 2450 tops & 5050 lows.

Question anyone on the driverack +:

Can you program via PC on real time?

Or is the USB for firmware updates?

[mafaudio]

how about QCS Brand and RMX Model?

[SUPERFRESH98901]

can u make a video in how to update it

[LILROCKERDUDE888]

do they make a drive rack for a nonpowerd speaker

[gunnyranger2]

@LILROCKERDUDE888 All of them [Driveracks] are designed for non-powered speakers...except for the "PX model" which has been specifically designed for powered speakers.

[ratedr777]

verry good

[schrojo40]

is there any way to run a 4-way out of this Driverack?

[2007jhi]

hay dbx guy with out me writing a novel i runn a 3way (passiv) system with alot of shit want to make sum rack space and like alot of the feats of these drive rack wats the best all rounder to get ,, cos im just getting lost reading each feat list as they all have alot of the same stuff and then i miss the diffrentsis please help jhi

[ReverbAndBeer]

What if I am NOt using speakers, amps, etc, made by Harmon International? How do I select "Meyer Sound CQ-1"?

[stefanmplayer]

Heey, i am running a passive sub - top system, so i was thinking about puying a Driverack PX because i only low/high outputs, however i have been told the driverack PX is only for powered speakers, so i have to buy the driverack PA but here i see that the driverack PA splits te signal in low/mid/high, so my question is: CAN i use the Driverack PA with 2 subwoofers and 2 mid/top speakers (so total 4 speakers)

or do i need to have 6 speakers, like subwoofers, seperate mid speakers & high speaker??

[shiva19924]

@stefanmplayer You can bridge the outputs and put together yur left high out and yur left mid output together and then do the same with the right channel. I use product like this on a day to day basis.

[stefanmplayer]

@shiva19924 ok thank you for your information, much apreciated.

i guess that how exactly to do what you say is described in the user's manual?

[shiva19924]

@stefanmplayer Yeh. Just bridge the left high with the left mid and right high with high mids. I do the same thing with my PA and it works fine. And then I run my lows to the two subs i got, A total of four speakers just like you. If u have any problems message me and ill help you. Ive studied the Driverack inside and out.

[yeanny]

Here's my question about drive rack pa. Normally I have 4 vocal mics on stage. When setting up the auto feedback do I have to do all four mics or just one?

[shiva19924]

@yeanny You would have to use all four mics. Dont use any vocals or musik just turn yur faders and/or gains to the point where your system is feeding back and the feedback surpressor will cancel it out. U can also configure your filters ( feedback ) to live or fixed.

[yilos1982]

What an ass....?

[pookazorro1]

well this vedio just confirm my set up

[MrFlores518]

I was blind and now I see the light, my question is, will the rack PA replace a mximizer and crossover?

[yutuubfreak]

im not sure about the mxmizer but it can replace the crossover

[marliseKrubniki]

traduza este vídeo, por favorrrrr!!!!

[johnthelad]

Now I understand how to set one up, I'm convinced enough to by one.

John.

[cmbmusic]

Informative...and entertaining. thanks!