5 AMP DRY CELL

[Ikre100]

is it 3 hole or hole cell ? and thichknes of the gaskets ?

[HHOButterSkate]

i'm leaning toward a faulty meter. if you calculate it out its 18.5mmw

[sakcheegii]

I don't believe it is running at 5amps and producing 1 liter per min. maybe cold start?

[caboflyguy]

Its easy to fire up a cell with max electrolyte and get low amps and high numbers of mmw. lets run it for an hour and see the stats! Thats what I thought.You dont even have a PWM to come close to efficientcy.

[Bazaradic]

No offence but I think your ampetre is way off. These cells generally run at about 18AMPs to the litre.

[sodapop503]

I've seen quite the range of what dry cells can do. but 5 amps/L/Min does sound a little low. but if hes putting in 12V I dont see why the amperage is so low. maybe the plate spacing? it looked a hair wide.

[caboflyguy]

Huh??

[sodapop503]

he is running 5 amps at 12v. and getting 1L per minute. That's not very much power for 1LPM.

[1miltond]

this is a bad idea to promote you cell sales on ebay you know this test is no good

Put a Amp meter on the front of the cell

so wee cant see the conections to it

[sakcheegii]

Is your car running 100% of hho and without gasoline? how many volts and plate size and spacing?

[sodapop503]

I've never heard of any car running on 100% HHO

[Boyntonstu]

Voltage?

[Sumermagor]

i have a cell which withdrawing 0.4 amps and producing 120ml of gas,

[bhelpurii]

that equates to 16.65 mmw...most of us are trying to break the 6 mmw barrier.....I seriously suspect current readings

[caboflyguy]

I'm with you on this assumption!

[higherpoweredh2o]

Not to rein in on your parade but automotive analog ammeters are horribly inaccurate. For the best demonstration you need to get an inductive dc ammeter. I have seen and have analog meters up to 10 amps off. The meter on my power supply is 10 amps off. its an astron so its not cheap. It was checked against my inductive and my shunt. Its off. I have got excited before also, buts its important to show proper tests so people are not mislead. Great looking little cell.

[caboflyguy]

Right! except cell looks like ss home depot light cover cell.

[RayShafft]

Might sound like a dumb question, but how the heck does the dry cell work? I use a wet, but what is hitting the plates to make HHO?

[d3adp001]

might want to check you instruments.

[jermy342]

I hooked a new amp meter up today and it bounced back and forth between 5 and 7

[d3adp001]

what elyte and concentration are you using, also temp of cell.

[jermy342]

I used KOH and temp never got even warm and I ran for 2 hrs.

[d3adp001]

well then good for you, when ya gonna run a generator on it?

[jermy342]

As soon as I get some time. I would like to get a couple running off of hho.

[GoGreenHHOhybrid]

I "think" I know wy your Amps are bouncing up & down! The gas bobbles may be building up between the plates, when this happens the Amps go down, when the bobble releases the Amps go back up! I seen this happen with a cell I made. Hope this helps thanks john...

[jdcmusicman]

Nice cell,good production, but 5 amps sounds a little to good...best i have seen with a 21 plate drycell is 11.1v 12 amps 1 liter 89 secs..

and with 31 plates 12v 20amps 1 liter 39 sec...

What is your plate spacing and plate size?Have made sure you dont have a faulty amp meter?I had one fool me, found out it was reading wrong..

[jermy342]

I hooked a new amp meter up today and it bounced back and forth between 5 and 7

[derbydoug1977]

nice job how many neutrals 3 or 4

[jermy342]

I used 4 nuetrals

[markmil2002]

4 nuetrals is waisted energy. There should be 2 volts per cell. Your amps will climb. Also, the fact that you didn't know that discredits this whole video.