Do you run it on just hho or is it a mix of hho and petrol ??
Can you help me out why my 60cc scooter wont work only on hho, it needs a mix of hho and petrol. Do i have to do something to the carb or anything else
nice bro!! meorn din ako nyan sa pinas, bote rin ng nescafe... sa wave 100r nakakabit! naiwan ko sa pinas, tawagan ko nga un nanay ko sabihin ko itago un generator ko... ikabit ko nalnag ulit!
@joepld bro pagn patipid lang yan, pero kung gus2 mo talga hydrogen lang mag papaandar pwedi rin, pero daming isosolve na problem nyan, meron din ako sa motor ko nya, wave 100r,tamang tama un bote ng nescafe..
Medyo late na ako sa paggawa ng HHO project ko pero malaki pala pakinabang dito kaya gusto ko pa, gawan car at trucks ko.,..... Sir pwede ba ako magpagawa ng PWM o saan po ako pwede bumili dito sa Manila?
How is it with your power supply? Isn't it draining? Do you have enough current to start the scooter on the next day? I have a bigbike with hho unit in it, running only at 10amps and find my battery drained after a ride esp, when headlight is on. I have to reacharge the battery from the power grid everytime I use the onboard hho unit. It would be a help if you specify the usage of your hho on your dio scooter and also your battery and alternator details. Regards, Jon
before without the pwm, my battery keeps on draining. Coz an hho generator connected with out a pwm. Will increase its amperage in proportion with the heat generated by the hho generator. Lets say at cold start its 10 amp, Use your vehicle for one hour or more, then measure again the current. You will see that the current is no longer 10 amp, it will be higher. Thats where the pwm comes in handy, coz it limits the current to my specification.
probably making a huge unit which is capable of producing enough hho car's engine, but remember to produce large amount of hho also requires more supply of current. Regards
its serves as a fuel enhancer. hats the purpose of bubbler, as a spark arrestor. I connected the tube at the manifold after the carburator. And airbox before the carburator.
I put the fan as a reserve if ever im going to use the pwm for higher amperage. Right now it only runs at 1.5 ampere, so it doesnt get hot, no need for the fun for the moment, so i turned the fan off. The Hho is just a suplement for the gasoline. The capacitor is for only stabilizing the current, since my battery is already weak. With out the pwm my battery discharges easily.
Hi, great video. I understand you say HHO supplement to 2 stroke fuel improves distance travelled to 30k/ltr. Well done nice work. Can you tell us more about your PWM, capacitor and the stainless steel parts in your cell Thanks for sharing.
the pwm is based on zeros current limiting pwm design. The stainless steel parts is compose of 2 tubes. the outermost part is a stainless wire, winded around the tube. configuration is - n +.
that pretty impressive, I would only have a couple of questions to get some clarity on a couple of things - if you don't mind). 1) I noticed that your cooling fan on the PWM was not turning, have you had problems with this over heating? 2) I was wondering if you are completely running on HHO (Hydrogen, or Water) and this is NOT a gasoline suplemental unit, 3) Is the Capacitor connected directly to the PWM and then to the Fuel cell? (cont.)
kaw ba nag assemble ng pwm mo?mga magkano inabot ng pwm?
noelkorea111 10 hours ago
Do you run it on just hho or is it a mix of hho and petrol ??
Can you help me out why my 60cc scooter wont work only on hho, it needs a mix of hho and petrol. Do i have to do something to the carb or anything else
Bestundesun 4 weeks ago
what water -electrolite you have ? And what tipe of cell you construct?
Ikre100 3 months ago
can you give us schematic for PWM and how you bild the cell is it use only distil water or some ingredients ?
Ikre100 6 months ago
nice bro!! meorn din ako nyan sa pinas, bote rin ng nescafe... sa wave 100r nakakabit! naiwan ko sa pinas, tawagan ko nga un nanay ko sabihin ko itago un generator ko... ikabit ko nalnag ulit!
foxnad 6 months ago
@joepld kuha ka ng kuryente sa cgarging ng motor mo, un nga lang mawaal horn at flasher mo, pero uubra
foxnad 6 months ago
@joepld bro pagn patipid lang yan, pero kung gus2 mo talga hydrogen lang mag papaandar pwedi rin, pero daming isosolve na problem nyan, meron din ako sa motor ko nya, wave 100r,tamang tama un bote ng nescafe..
foxnad 6 months ago
@foxnad nice bro!!!
foxnad 6 months ago
Maganda po set up nyo......
Medyo late na ako sa paggawa ng HHO project ko pero malaki pala pakinabang dito kaya gusto ko pa, gawan car at trucks ko.,..... Sir pwede ba ako magpagawa ng PWM o saan po ako pwede bumili dito sa Manila?
Salamat po..
vox1philippines 2 years ago
@vox1philippines ...................... meron ako kung kailangan mo bro . text me nalang # 09284260165 . rolly
poprock4me 1 year ago
@poprock4me k txt kita mya.... smart ba ito bro? pag smart tawagan kita.
vox1philippines 1 year ago
@vox1philippines Smart ang Gamit ko .
poprock4me 1 year ago
@poprock4me ok tawagan kita maya ......
vox1philippines 1 year ago
This has been flagged as spam show
@vox1philippines ...................... meron ako kung kailangan mo ng PWM 12v - 24v 15amps and 30amps . text me nalang # 09284260165 . rolly
poprock4me 1 year ago
I don't like it... I LOVE IT! :-D... Mabuhay ka kapatid! You did great!!!
ehnriko 2 years ago
@ehnriko
You are not supposed to love it - worship . We must worship only God
Ikre100 6 months ago
what value of 555 timer u used?lm or ne
kubrikassaf 2 years ago
How is it with your power supply? Isn't it draining? Do you have enough current to start the scooter on the next day? I have a bigbike with hho unit in it, running only at 10amps and find my battery drained after a ride esp, when headlight is on. I have to reacharge the battery from the power grid everytime I use the onboard hho unit. It would be a help if you specify the usage of your hho on your dio scooter and also your battery and alternator details. Regards, Jon
jonjetzone 3 years ago
before without the pwm, my battery keeps on draining. Coz an hho generator connected with out a pwm. Will increase its amperage in proportion with the heat generated by the hho generator. Lets say at cold start its 10 amp, Use your vehicle for one hour or more, then measure again the current. You will see that the current is no longer 10 amp, it will be higher. Thats where the pwm comes in handy, coz it limits the current to my specification.
identity77 3 years ago
it's basically a supplement which could reduce emmision up to 90%, makes your engine more effecient in combustion and could add more horse power.
jonjetzone 3 years ago
probably making a huge unit which is capable of producing enough hho car's engine, but remember to produce large amount of hho also requires more supply of current. Regards
jonjetzone 3 years ago
its serves as a fuel enhancer. hats the purpose of bubbler, as a spark arrestor. I connected the tube at the manifold after the carburator. And airbox before the carburator.
identity77 3 years ago
@Akhenra
I put the fan as a reserve if ever im going to use the pwm for higher amperage. Right now it only runs at 1.5 ampere, so it doesnt get hot, no need for the fun for the moment, so i turned the fan off. The Hho is just a suplement for the gasoline. The capacitor is for only stabilizing the current, since my battery is already weak. With out the pwm my battery discharges easily.
identity77 3 years ago
Hi, great video. I understand you say HHO supplement to 2 stroke fuel improves distance travelled to 30k/ltr. Well done nice work. Can you tell us more about your PWM, capacitor and the stainless steel parts in your cell Thanks for sharing.
rhythmstic 3 years ago
@rhytmstic
the pwm is based on zeros current limiting pwm design. The stainless steel parts is compose of 2 tubes. the outermost part is a stainless wire, winded around the tube. configuration is - n +.
identity77 3 years ago
Also - how are you building up charge in the capacitor and rapid leasing it to the fuel cell?
Looks good, and keep up the great work!
akhenra 3 years ago
that pretty impressive, I would only have a couple of questions to get some clarity on a couple of things - if you don't mind). 1) I noticed that your cooling fan on the PWM was not turning, have you had problems with this over heating? 2) I was wondering if you are completely running on HHO (Hydrogen, or Water) and this is NOT a gasoline suplemental unit, 3) Is the Capacitor connected directly to the PWM and then to the Fuel cell? (cont.)
akhenra 3 years ago