If you are planing to make a video of wood working at least please do it the right way, clean and safe. Make an out-feed table.
Never walk away form a running table saw blade with material between the fence.What is important is not what you make but how safe you make your cuts and everything. Clearly from this videos, I think it is not a bad idea for you to take some woodworking classes. Believe it, kick back can happens anytime. Take some classes on safety.
Samten10a, Thanks for your comments, I used what I had available and I am a hobbyist, Please show me a video of your set up. My set up yields a perfect cut, how about yours? The sound has been addressed before, it was one of my first videos can I see one of your first videos?
Well your saw horse is too tall for that job. They should only be about 24” to 30” tall so you can get on top of the ply to finish cutting it. Waist high if you do not need to make the cuts that are long.
You need to build a 24” to 48” 8’ long out feed table. A In feed table also. Should also work on doing voice over on video and turn with the sound of equipment turned down. Work on scrip of what you want to say.
The voice over is a good idea, but dry runs are hard when you are cutting wood. Any suggestions for a voice over editor would be appreciated.
butchschmidt 3 months ago
You are probably an excellant craftsman. When making your video do a mock
up dry run video and review it before making your "final video". The radio was
a big distraction as people couldn't hear what you were saying. If you want
music in your video, you can do a "voice over" video with a simple editor for
your computer. Keep up the good work. Not all good craftsmen are good
videographers.
ksmit2 3 months ago
If you are planing to make a video of wood working at least please do it the right way, clean and safe. Make an out-feed table.
Never walk away form a running table saw blade with material between the fence.What is important is not what you make but how safe you make your cuts and everything. Clearly from this videos, I think it is not a bad idea for you to take some woodworking classes. Believe it, kick back can happens anytime. Take some classes on safety.
swakalitaka 3 months ago
Comment removed
swakalitaka 3 months ago
Cant hear a thing for the radio.
BenYoumans 4 months ago
Samten10a, Thanks for your comments, I used what I had available and I am a hobbyist, Please show me a video of your set up. My set up yields a perfect cut, how about yours? The sound has been addressed before, it was one of my first videos can I see one of your first videos?
butchschmidt 5 months ago
Well your saw horse is too tall for that job. They should only be about 24” to 30” tall so you can get on top of the ply to finish cutting it. Waist high if you do not need to make the cuts that are long.
You need to build a 24” to 48” 8’ long out feed table. A In feed table also. Should also work on doing voice over on video and turn with the sound of equipment turned down. Work on scrip of what you want to say.
samten10a 5 months ago
nice video, thanks for the advice, keep it going
Skeebled 6 months ago
I'd a waiting till the blade completely stopped before I'd move it.
Fondlyours1960 6 months ago
The background noise is distracting.
Fondlyours1960 6 months ago
Matti, this was one of my first videos, so I screwed up. Better to have something than nothing, now I know.
butchschmidt 1 year ago
Next time talk louder than the radio or turn it off please.
matt112485 1 year ago