If you want this, search ebay for knight rider light. Its the only one with a control box with lights and speed control dial. Then buy tint spray for the light bar so its invisible when off. Ruff it up with wet-sand paper before you paint so it sticks. Don't rush like me and skip it.
took the horse off this one and mounded it back deeper with 3m tape looks sick. Still got the KnightLight Bar, but mounted it with a black bracket and installed a switch where my coin holder is. Dremeled out coin holder piece and mounded black lighted switch inside and snaped it all back in, Looks like its oem. I did a killer job if i say so myself.
Anyways, it's a 16 valve V8 mustang GT, unless you swapped engines with an 05+ GT.
Our 99-04 GT's had a 2v per cylinder engine, totalling to 16 valves. The 05+ GT's had 3V per cyllinder, and 99-04 mustang Mach 1's and cobra's had the 4V per cylinder engines.
It would be way too much money to swap in an 05-09 GT motor. the mounts, wiring, throttle, computer, setup, and most of the drive train are different. 99-04 is throttle by cable, 05-09 is throttle by wire. For the money you would spend for the swap you could build a new motor with more RWHP. It would be nice though if they could just be dropped in.
At first I did know what you where talking about until I saw he had it as a 24 valve. I only wish he had done the video outside in the wide open. I just got a Bassani catted X-Pipe (2.5" pipe) and I have the Flowmaster Thunder catback setup too. I got to wait 2 weeks before I can put the X-pipe in. I need to PB spray the manifold stud to the mid pipe for a while so I don't strip them.
It used to be O/R but the mechanic who fixed my exhaust leak said he cant legally work on the car unless it had cats or he'd lose his license if they found out.
I dont think its legal, almost positive, no red lighting in front, just amber color and white. Otherwise it may be like impersinating an officer. I dont think its a problem as long as you dont drive with it unless you know its clear or like me when its parked at night and I leave it on when I run into the store. Its great to see people trip over a light that goes back and fourth. Pretty entertaining! Set me back $80 with the tint spray.
How many inches is that light bar? Cause im not to sure what size to go with?
Overspeed07 10 months ago
@Overspeed07 22" long
Crackupforever 10 months ago
How many inches is that light bar?
Overspeed07 10 months ago
does the car talk to you?
KingWing777 1 year ago
cool =D
lamborghinigirl123 1 year ago
guay this metallica is good
guitarralktd 1 year ago
awesome car :)
hilmarjons 2 years ago
on sale at ebay!!the super up rgade! 180!
txknightrider82 2 years ago
If you want this, search ebay for knight rider light. Its the only one with a control box with lights and speed control dial. Then buy tint spray for the light bar so its invisible when off. Ruff it up with wet-sand paper before you paint so it sticks. Don't rush like me and skip it.
Crackupforever 2 years ago
nice i like the metallica too
lonestarmetal 2 years ago
took the horse off this one and mounded it back deeper with 3m tape looks sick. Still got the KnightLight Bar, but mounted it with a black bracket and installed a switch where my coin holder is. Dremeled out coin holder piece and mounded black lighted switch inside and snaped it all back in, Looks like its oem. I did a killer job if i say so myself.
Crackupforever 2 years ago
My bad I dont know why I put 24v I meant 16V ,sorry people.
Update: I Changed the front to Mach1 grill delete and painted it glossy black .
Crackupforever 2 years ago
oh i see, it's a V badge in there.
Anyways, it's a 16 valve V8 mustang GT, unless you swapped engines with an 05+ GT.
Our 99-04 GT's had a 2v per cylinder engine, totalling to 16 valves. The 05+ GT's had 3V per cyllinder, and 99-04 mustang Mach 1's and cobra's had the 4V per cylinder engines.
jakashh 3 years ago
It would be way too much money to swap in an 05-09 GT motor. the mounts, wiring, throttle, computer, setup, and most of the drive train are different. 99-04 is throttle by cable, 05-09 is throttle by wire. For the money you would spend for the swap you could build a new motor with more RWHP. It would be nice though if they could just be dropped in.
Bigwolf8469 2 years ago
exactly my point. What i'm saying is that he was wrong, but i said it nicely :D
jakashh 2 years ago
At first I did know what you where talking about until I saw he had it as a 24 valve. I only wish he had done the video outside in the wide open. I just got a Bassani catted X-Pipe (2.5" pipe) and I have the Flowmaster Thunder catback setup too. I got to wait 2 weeks before I can put the X-pipe in. I need to PB spray the manifold stud to the mid pipe for a while so I don't strip them.
Bigwolf8469 2 years ago
nice, i also hace a bassani catted X.
It used to be O/R but the mechanic who fixed my exhaust leak said he cant legally work on the car unless it had cats or he'd lose his license if they found out.
jakashh 2 years ago
where did you get it form? and what's that in your hood scoop?
I drive an 01 Stang GT. I have a vid of it, if you care.
jakashh 3 years ago
thats a nice ass v8 stang bro..wish my 6 was an 8.
mrgoodbar 3 years ago
I dont think its legal, almost positive, no red lighting in front, just amber color and white. Otherwise it may be like impersinating an officer. I dont think its a problem as long as you dont drive with it unless you know its clear or like me when its parked at night and I leave it on when I run into the store. Its great to see people trip over a light that goes back and fourth. Pretty entertaining! Set me back $80 with the tint spray.
Crackupforever 3 years ago
thats alsome so can you drive with these ? or is that iilegal how much?
justin123v 3 years ago