Added: 2 years ago
From: Magsz
Views: 15,384
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (92)

Sign In or Sign Up now to post a comment!
  • looks good. did you just change the spring to increase fps?or you changed internals to reinforced internals as well

  • @koziro112 I used a custom cut spring. On top of that yes, i added 6mm bushings so that the axles of the gears would have a solid foundation to ride on. I know i did a few other modifications but i did this so long ago that i cannot remember what i did.

  • @Magsz Hey Magsz, do you remember what spring you originally used for it before you had cut it? Been trying to get my gun to fire at 350 fps, I'm managing 300, 330, or 380 (with standard length aeg spring, recoil unit taken out, it's somewhat unstable, with occasional 400 fps anomalies)

  • @aaron4820 I really dont remember. I THINK i cut down a modify M110 spring, ie removed two coils. Its been so long i cannot recall. My apologies my friend.

  • Its airsoft go get a real one man ur of age. And thats a tack stance for tbe way hes holding it hugs close to the chest and helps with rec control but its a toy so it is silly hes holding it in that fashon haha

  • @paramedic202791 wow have you heard of going to someone's profile and looking at their other videos? Hmmmm, I wonder if there are any real gun videos there. Oh wait, i don't actually because every video other than this one is about real guns.

  • how stupid does he hold the handguard? very stupid or extreme stupid?

    no, just kidding , it just looks kinda silly ^^

  • Seriously all these comments ripping on the fact that it is an airsoft replica. He holds it fine using the accessories he has, it is a great company (Tokyo Marui) and all these real steel shooting wannabies really need to lighten up. Half the trolls that comment do not even own real steel weapons. Internet trolls feel tough behind their monitors.

  • That's so cute!

  • what setup u running in there? like motor, and gear box internals?

  • how many rounds-pre sec??

  • What battery are you using?

  • @headbanger34567 7.4 volt 25c lipo. They're thunder power packs.

  • @Magsz your home looks fugly no offense. too much damn white.

  • I tried holding my gun like this because it seems like an intersting method.. it really hurt my wrist, does this ever happen to you?

  • @PTownAirSofter Negative. It does hyper extend the wrist a bit but not to the point of pain. Magpul invented the AFG to put the wrist at a more natural angle while still allowing the user to get as high on the gun as possible.  Watch some of my other shooting vids, im using the same grip.

  • @Magsz Maybe I'm just doing it wrong... is there a technique to it? If so, anywhere I can find out this technique?

  • PT, ill see if i can get a video up addressing your question either tomorrow or wednesday. Its easier than me typing an essay here. :)

  • @Magsz That would be great, thanks for being an awesome person :)

  • I'm upset that my recommended videos shows me this and it's another LAME airsoft vid. Not to troll but how old are you...and you're playing with toy guns.

  • @jamonrye Im six years old and i like toys. Toys are fun. Do you like toys? Want to play toys with me?

    Seriously dude, i didnt know Youtube was relegated to only epic badassery and the presence of anything not certified "awesome" by you wasnt allowed...Next time click the pause button and go to another website..you DO know you can do that right?

  • @jamonrye kid ur fucking retarded because the way ur talking i bet you arent old enough to own an airsoft gun.

  • @jamonrye Well I suppose you're also implying that S.W.A.T. And U.S. Marines are also children, correct? Because they also train with these"toy guns". Please take your idiotic comments else where. You're only making yourself look like another useless shit head that was accidentally conceived in your mother womb instead of being swallowed or aborted. Thank you, have a nice day.

  • Way to pretend to look down the site, someone seemed ready :P

  • @fcuk4220 Dude, i was totally ready to fuck up that wall, i had a bead on his head with my xray vision that can see through the cover on the aimpoint. True story man, true story. I learned that technique from a Navy Combat Recon Sealninja.

  • @Magsz Im sorry if I upset you please dont go urban prone on me.

    /rolls eyes.

  • @fluffych1cken I couldnt possibly do that, im too busy crying and clutching my Travis Haley action figure.

  • @Magsz LOL

  • Comment removed

  • someones been watching a little too much art of the tactical carbine...

  • @fluffych1cken Yes, i go to sleep every night watching those dvd's. In fact, i have Travis Haley and Chris Costa posters all over my bedroom. After i get home from 11th grade math class i play with my Magpul Dynamics Action figures as well.

    /rolls eyes.

  • sopmod is inccorect sopmod stands for special operations pecuilar modification system aka rail system

  • @fatkid677777 Uh...what? Its the retail name of this particular gun...not sure what you're talking about.

  • nice gun

  • did you really touch his beard? how did you manage not to explode?

  • Aight I know it is a way to reduce recoil. But you realize this is fucking airsoft, right??

  • @mdrrdm426 Did you ever think that he might shoot real AR's as well, and that it just carries over out of habit? If he's only an airsofter than I agree, completely pointless....

  • @mdrrdm426 THIS IS AIRSOFT?!?!?!?! Holy SHIT! I thought my life depended on my ability to shoot 6mm projectiles in as sexy a manner as possible...

    Dont take yourself so seriously dude, its just a video on the internet. :)

    Jbear, thanks for the comments brother.

  • @mdrrdm426

    The grip is also used to reduce fatigue by evenly distributing the weight all over your palm you fag

  • Am i correct that if i would buy a SB sopmod i am getting exactly what is shown in the picture.

    So if i would buy a 12.5 in SB sopmod (2 in. shorter than the factory made version) am i getting a sopmod with the xtm railpanels including the scope...as shown in the picture?

    Am i correct that the lipo battery is placed in the stock?

    Is there also a charger included or does that come seperatly?

  • You hold your gun like a bitch.

  • @mdrrdm426 Thanks for the constructive feedback!

  • @mdrrdm426 Thanks for the constructive feedback!

  • @Magsz lol

    

  • @mdrrdm426

    nope, he holds it to reduce recoil you idiot, and yes, it is an airsoft gun, but that is a real way of holding a weapon and many people use it, no need to be a dick

  • i love how this guy try's to shoot his gun like Chris Costa. what a wanna b

  • @paint08baller Indeed. I certainly am, in fact, im wearing the same type of underwear as Chris. One time i touched his beard in person and nearly fainted...my life is complete. Go eat some paintballs and drown in your own stupidity. :) Have a good night!

  • @paint08baller You're a paintballer and you say something like that.

    I just facepalmed through my own head.

  • @paint08baller It's called a gunner's grip. It was invented to give the shooter better recoil control. Looks to me that you yourself are a wannabe. You lack to ability to think.

  • @paint08baller lololololol noob.

  • Magsz does the gun produce the same sound if you fire without looking the bolt catch,so with bibis?If i play this video over and over agina the sound realy sound to be good to be true.

  • @jeisinga Well, in all fairness i was firing it in a very and i mean very open room with 20 foot ceilings so it sounds a little meaner than it really does, ie the echo adds to the sound a bit. To better answer your question yes, when you are firing bb's the sound signature does change a bit but it still has a unique sound and its still quite sharp.

  • Jeisinga, Ive taped down the bolt catch so i can dry fire the gun.

  • Damm this looks nice i cannot believe the shout that thing makes.are you shooting that thing i a small chamber?

  • how did you make your sopmod shot 355fps, did you put a new spring in it?

  • Enjoy it if i would buy one, lol but im stuck with a combo of armilite externals and JG/Echo1gearbox. Good video

  • You have a gun running on a lipo with a 6mm version 2 gearbox? Brave.

  • Its a 7.4 volt 25C lipo. Its roughly equivalent to a 9.6 volt NIMH. The bearing/bushing size has little to do with what the gun is capable of unless you're pushing extremes. Ie, a larger diameter bearing is needed the higher you push FPS and ROF.  You can easily run a 500 fps gun on 6mm BUSHINGS. Conversely, you can also easily run a 35 RPS gun on 6mm BUSHINGS as well.

  • Oh, ok. By 6mm V2 gearbox, I was referring to the unreinforced gearbox, not the bushings. Personally I'd only run this setup you have in 7mm+ gearboxes (again, not because of the bushings, but because of the reinforced areas).

  • Not all 7mm gearboxes are reinforced. At 350 fps you do not need reinforcing in the cylinder window if you radius the corners. Even without radiusing the corners the TM V9 is more than adequate to handle the speed and power that im running these guns at.

  • Oh yeah, that's right, this isn't even a V2.

    When I said 7mm gearboxes are reiniforced, I was referencing Dboy's gearbox shells. I probably should have mentioned that, lol.

  • Lipos dont destroy guns

    I've put 5000 rounds through a DE M83 running on a 11.1 lipo 20c

  • Yeah, low powered ones don't. And I wasn't talking about in like 30 seconds of firing, I was talking about over a long period of time, like 1-2 years.

  • I understand what your trying to say, but most people dont keep a single airsoft gun for 1-2 years. But a battery is a battery and you have to use mega voltages before you should be scared of using them in a airsoft gun.

    I've got 3 people running 14.8 volts at my field, and one running 18.5. You just have to take pre cautions

  • my jg m4 locks up on semi sometimes.

    do u have any tips on how to fix it?

  • @khmer932 shim your Gearbox

  • Comment removed

  • Nice grip on the gun.

  • nice masada hand guards

  • magpul m4  handguards

  • ??? its the same hand guards designed from a masada

  • MOE hand guards.

  • yes, thank u :)

  • i would want to do that but a stock tm sopmod is already like $550....its a bit out of my budget :(

  • First off very nice upgrades.

    Just wondering what spring did you put in it to get 350 fps?

    how many rounds have you put through it and how is it holding up?

  • Custom spring. Ive put well over 35k rounds through this gun at 350 fps and its holding up beautifully.

  • get a ar15

  • I have several...

  • haha..... flame fail.

  • holy crap i got my sopmod from you =D the one question i have is the laylax springs for the actual gearbox not recoil, where will they take the current fps and do they screw with the recoil?

  • If you dont chop your spring by about an inch you're going to end up preventing the recoil weight from reciprocating in the receiver extension. I will have custom Sopmod springs and recoil springs available soon guys!!!

  • so the laylax springs need to be chopped too?

  • Any spring that is not designed specifically for this gun needs to be chopped otherwise they are significantly longer than they need to be.

  • that looks soo good! i want it lol it vibrates ;)

  • ha! If i had cut the mainspring a little more it would have retained some of its original recoiling goodness. Instead, it bounces around a bit but doesnt quite feel like it used to. All in all its still a VERY fun rifle.

  • nice one man 5/5

  • GAY! : )

    I love it Ian and rember Watch DDDDDDDDDDDDDDDssssssss!!!!!!

  • Can you go into some details on what modifications you did? I am really interested in knowing what you did to it in greater detail. Thanks.

  • what size battery are you running in you hand guard? I'm getting one for the new CA M15A4 blowback but im not sure what battery to get

  • Sorry didnt look in the descrpition first. Do you know the max size of battery?

  • i wonder if your country only needs 350 fps whats the use of modifying it? guns are already 300+ out of the box.

    where i live 450fps is the limit and most have 30rof on competition and you could shoot as near as 1foot.

  • way to go Ian you are becoming Costa.

    Nice gun too brother cant wait to see it

  • What type of barrel nut/Delta ring does this use? IE normal TM "fake" style or real steel "gear" style?

  • Nick,

    Sorry for not replying sooner, been busy with alot of things! The gun comes in stock form with a somewhat realistic style barrel nut. The barrel nut will accommodate the MOE handguards without modification but if you want the lockup to be REALLY tight i recommend replacing the barrel nut/delta ring with a Classic Army Barrel nut/delta ring assembly.

  • i have a TM M4 and the magpul handguard does no fit. the wedge is too small to fit in. Will the delta ring from CA fix that?

  • Indeed!

  • Its a modified three gunner style grip. I use it to mitigate recoil on my real AR. Its useful when you shoot square to the target in a non bladed stance. It works for me but im definitely not a high speed guy, just a regular joe who shoots for fun and trains every now and then.

  • What's with the grip. Isn't that a little hard to do CQB like that, especially when you aren't in the front of the stack? Anyway if you can still jack people, more power to ya

  • You should see Chris Costa.

    His is similar. =)

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more