I love that engine! The start process is really cool. I am surprised you can still buy the starter plugs (what are they called?). You might have already answered this, but where did you get this engine?
i have identical engine to this but mine is in australia - made in coventry england 1938 and is called a uniporn h10 manufactured by porn & dunwoody , who still make stainless steel lifts.
It was sold new in tasmania taken to the west coast of aust. and then brought to the east coast. It was a generating plant when new.Is belived to be the first pressure injected impirial diesel of time.
Wow!! My uncle just restored a Deutz D15 Tractor and it makes the same sound!! I bet it has the same engine, except it uses glow plug instead of this cotton plugs, and of course it has electric starter. Man, it is a great machine !!!
It is a kind of glowplug. The sulfur on it can be compared with the brown-red head of a match. When it comes under compression it burns spontaniously. The engine starts and the plug glows maybe for 5 to 10 combustions. The engine has than the speed to run further on its own.
it's put into the cylinder and burns easier than the diesel oil, this lasts for the first few ignition cycles and gets the engine started easier on cold.
That thing is a oil wick with some powder on it like on a match. Under compression it lights spontaneous. It helps to start the engine, I think it will help especcialy the first 10 combustions untill the engine has speed enough.
There is a handle that holds the inlet valve open. When turning the engine I hold that handle in place, I stop turning and then I release the handle so the inlet valve will close. Then the engine runs. When I don't do it this way there is a change of backfire.
Nice video! That thing you put in the engine, did you light that to warm up the intake air? While starting, your left hand was holding the exhaust valve open right?
Is this a premixed semi-diesel, or a 'proper' direct-injecting diesel? Thanks.
I love that engine! The start process is really cool. I am surprised you can still buy the starter plugs (what are they called?). You might have already answered this, but where did you get this engine?
AltRage 2 weeks ago
@AltRage
My grandfather called those plugs "punks."
pleuresy 1 week ago
@pleuresy Perfect name-- just like lighting off fireworks. Thank you!
AltRage 1 week ago
i have identical engine to this but mine is in australia - made in coventry england 1938 and is called a uniporn h10 manufactured by porn & dunwoody , who still make stainless steel lifts.
It was sold new in tasmania taken to the west coast of aust. and then brought to the east coast. It was a generating plant when new.Is belived to be the first pressure injected impirial diesel of time.
MrSevenworlds 1 month ago
What would this thing be used for??
MrDieselsmoker 2 months ago
its wheel of Fortune.
sideslide23 4 months ago
what makes that hollow knocking sound while it freewheels?
KrankieV2 4 months ago
is there a turbo on that beast lol
UthinkUknowlol3715 5 months ago
why such a big fly wheel?
1337bman 6 months ago
@1337bman needs it to keep spinning due to high compression and the fact that it's a hit & miss
KrankieV2 4 months ago
@KrankieV2 no it isnt! its a throttle governed engine!
angamoos 4 months ago
@angamoos eh.. looked to me like the valves weren't always moving
KrankieV2 4 months ago
@KrankieV2 oh thats a normal camera effect! I know these engines quite well. they are 4 stroke TG compression ignition engines.
angamoos 4 months ago
@angamoos ya learn something every day
KrankieV2 4 months ago
@1337bman because this big fly wheel will be used on Wheel Of Fortune.
sideslide23 4 months ago
Nice sound ^_^
dezamet023 6 months ago
so wie ich es kenne mit
zündfix
schöner verdampfer
gerkchen 7 months ago
built to last.
crapthisisalongusern 7 months ago
So what was that tin can stuff all about?
ooozmin 8 months ago
oh, farmer bill coming angain :P
MrGameboy1989 9 months ago
Sounds like a power stroke
littleg530 9 months ago
Deep sound. Best
enginelover1 10 months ago
The knocking sound is normal? What piece is at 0:29?
fhglhg 10 months ago
I love this sound, amazing!!!
hswg81 11 months ago
didnt have to flip me off dude
5150ramjet 11 months ago
VERY COOL! THANKS FOR POSTING!
joedrummer2010 11 months ago
thats good throttle response lol
Supramaniac24 1 year ago
Sounds like she has a bit of bearing knock.
Tremolux59 1 year ago
Attach those wheels to the engine and make that run off(only if you want to destroy something or destroy neighbors wall that you don't like)
reviewdevs 1 year ago
german mechanical art in its best form, simple beautifull classic,,,, i want one too,,, thanks for posting. ernst.
n4120p 1 year ago
Sweet
steveinusa 1 year ago
forgive me for being stupid, but what did you put in the cylinder?
TutorialsReviews123 1 year ago
This has been flagged as spam show
We do Russain marriage service now for low cost gettop5.info
yolanthe3g 1 year ago
What did you put in the cylinder at 0:27 ? A wick?
ideeman1994 1 year ago
needs a 8 inch chrome stack
ilovegoatsecks 1 year ago
This has been flagged as spam show
We bring you real Russian women online now gettop5.info
TaylorWmh 1 year ago
:-)
nifur1 1 year ago
that sounds like a truck engine :P
why not build 6 of these together? :D
MegaZsolti 1 year ago
Im goin to put this on my Can-am 800 renegade
bass3074 1 year ago 7
@bass3074
LOL
I can hardly imagine. It weights 450 kg/
stengine 1 year ago 3
@stengine Dang my dream is ruined thanks alot lol jk
bass3074 1 year ago
@stengine But for real i would have made it where you can drive the wagon that would be beast
bass3074 1 year ago
@stengine But why didn't u put a extented straight pipe on that it would sound even better then
bass3074 1 year ago
@bass3074 For sure it will be faster
diegomayan 1 year ago
is it pressure lubricated
benrobinson72 1 year ago
@benrobinson72
Yes it is, the oil pump is inside.
stengine 1 year ago
@stengine cool
benrobinson72 1 year ago
is it pressure lubracated
benrobinson72 1 year ago
sounds like gas hammer
corpmedia 1 year ago
cool machine
6marco5 1 year ago
where did you get that thing?
555russe 1 year ago
silent mode :)
fiilopunk 1 year ago
how many HP hawe this engine
fiilopunk 1 year ago
@fiilopunk
10 hp and a lot of torque !!!
stengine 1 year ago
That's a really good engine and a pleasure to see and hear in operation..
snowypetrel 1 year ago
Continous banging sound is the diesel being combusted. Old diesel rattle, clatter and knock due to their design.
duckvdub 1 year ago
That would be beautiful music to sleep by
ismasamov55 1 year ago
THAT is one nice sounding engine - well done.
goinghomesomeday1 1 year ago
very cool
formula22000nz 1 year ago
What is that continuous banging sound? Please explain.
Saranaprasadam 1 year ago
@Saranaprasadam
The ringing bang sound is the diesel combustion being
amplified through the flywheels.
turboslag 1 year ago
@Saranaprasadam the diesel knock when combusted thats the way the muffler makes it sound
benrobinson72 1 year ago
@benrobinson72
The muffler is just a sibgle pipe
stengine 1 year ago
simple yet very effective, oh when things were good. Love it man
pontiacmaniac2 1 year ago
Wow!! My uncle just restored a Deutz D15 Tractor and it makes the same sound!! I bet it has the same engine, except it uses glow plug instead of this cotton plugs, and of course it has electric starter. Man, it is a great machine !!!
cienmilretinas 1 year ago
Comment removed
cienmilretinas 1 year ago
Hey,
Wanneer kunnen we dat prachtmachintje eens bewonderen???? (het liefst ergens in de buurt van Oafere!!!)
kleinepierik 1 year ago
What are those things at 0:18? Are they like glow plugs or something?
024reredrum 1 year ago
It is a kind of glowplug. The sulfur on it can be compared with the brown-red head of a match. When it comes under compression it burns spontaniously. The engine starts and the plug glows maybe for 5 to 10 combustions. The engine has than the speed to run further on its own.
stengine 1 year ago 5
@stengine Thanks..
PERIZ99 9 months ago
@stengine thats awesome
HOLYHECKITSPAUL 8 months ago
@stengine HAHA looks like cigarette butt
LDD86 7 months ago
a sweet sounding yoke , compression and everything very tight sounding
bonzo874 2 years ago
I wish I could get my hands on one of these!
poweredparagliding 2 years ago
You can easily buy one of these in Holland or Germany. To get it home is harder.
stengine 2 years ago
poweredparagliding: You can. It's called a Ford Mondeo! lol
digitalbroadcaster 1 year ago
nice rebuild
cnasterodon 2 years ago
german mechanical art in its best form, simple beautifull classic,,,, i want one too,,, thanks for posting. ernst.
n4120p 2 years ago
what a glorious machine!! 5* and added to my favourites
thanks for sharing!
petrolhead1985 2 years ago
That engine "sounds" FAR larger than it really is!!
LincTexPilot 2 years ago
thx now i understand what the fuse paper does
pyronathanpyro 2 years ago
Tank you for reaction.
I always try to make a vid as clear as possible. So we aal can learn something.
The paper burns spontaniously when it comes under high compression.
stengine 2 years ago
@stengine i thought those were sulfur tainted saltpeter
fuses
wellsequipmentrepair 2 years ago
Those are called 'punks' here- engines like that are said to have punk start here.
pleuresy 1 year ago
@stengine what type of lubrication dose it have
benrobinson72 1 year ago
wat is the white spongy thing for at beginning
pyronathanpyro 2 years ago
I think you mean the fuse paper?
it's put into the cylinder and burns easier than the diesel oil, this lasts for the first few ignition cycles and gets the engine started easier on cold.
steamwally 2 years ago
Beautifull machine and sound
RODALCO2007 2 years ago
Great video!
The old Deutz engines are very nice.
5*!
Bidone1967 2 years ago
love the sound a bit like a bell ring
TheLaurencekid 2 years ago
Wonderful engine. I love the deep resonant sound of the exhaust!
scotty2307 2 years ago 13
Thank you for posting this. I always love seeing old machines cared for and I really have a soft spot for Diesel engines.
Pure mechanical beauty.
bobbie4 2 years ago
"only 10HP?" it's not how many, it's what you do with them! If you need more torque, fit a smaller pulley, simple as!
steamwally 2 years ago
This comment has received too many negative votes show
only 10hp for its size lol understandable its 1954
riely38 2 years ago
Nice video of this engine. It has a soothing sound..
cambriacity 2 years ago 3
Sweet, this thing is cool! Nice video, thanks!
mikeshotrodshop 2 years ago 2
Can you still buy Zundfix? Thanks Stenengine
sidecrank 2 years ago 2
Yes we can, in different sizes 6, 7 8 mm etc. They cost 12,00 euros per 100.
stengine 2 years ago
That thing is a oil wick with some powder on it like on a match. Under compression it lights spontaneous. It helps to start the engine, I think it will help especcialy the first 10 combustions untill the engine has speed enough.
There is a handle that holds the inlet valve open. When turning the engine I hold that handle in place, I stop turning and then I release the handle so the inlet valve will close. Then the engine runs. When I don't do it this way there is a change of backfire.
stengine 2 years ago
It is a normal diesel engine 4-stroke, direct injection. The piston is horizontal.
stengine 2 years ago
Nice video! That thing you put in the engine, did you light that to warm up the intake air? While starting, your left hand was holding the exhaust valve open right?
Is this a premixed semi-diesel, or a 'proper' direct-injecting diesel? Thanks.
CreRay 2 years ago