chevy tahoe wiring upgrade for the fi btl 18's

[Qaasim830]

Higher output alternator or stock

[jonmanch3st3r]

@Qaasim830 300 amp alt,stock is 110

[jimmyboonesks762]

you should have a fused distribution block going to the batteries and the second battery should be on a relay not directly to the alternator.

[Sffker]

14.5? I thought it was at like 13 before? Damn!

[marcosdboy7]

At first befor any upgrade dint your batt run to the computer on the driver side did u just run a 4 g to that off the batt thats on that side

[jonmanch3st3r]

@marcosdboy7 ya it did run like that..what i did was cut it shorter to the battery on the drivers side and kept the stock wire

[Wickedgmc]

I wish i had a buddy like you to narrate the system in my car. Your voice is alot more badass then mine. What size are the Kinetik batts? Those are some sick battery's man.

[jonmanch3st3r]

@Wickedgmc haha thanx man,they are the hc2000's you can find them on ebay

[perezmagdiel50]

so that means that all your 5 batteries are connected to the stereo, amps, and even in the car?

cuz my power supplies are just like that.....just that im running max 37 amps and it kinda get the voltage to drop down for the high power my amplifier pulls when i turn it all up jeje :)

[pmayscue0531]

good job man

[sonicvomit]

nice i love my 5/0 gauge super beefy lol

[kyleaz2000]

@sonicvomit Ho. Lee. Shiiiiiit....

[XxMIXEDBOI25xX]

nice whip man

[jonmanch3st3r]

@XxMIXEDBOI25xX thanx man,not bad for a 97 no?

[northsideskate]

@jonmanch3st3r man do you sand your grounds ........? if you dont you should!!

[nickfs442]

what kind of wire is it? just wonderin

[jonmanch3st3r]

@nickfs442 this is an old vid i have all 0 gauge now,i run q power in my tahoe found on ebay

[stith1991]

@jonmanch3st3r reground to the strut tower..it goes striaght to the frame, much better ground

[jonmanch3st3r]

@stith1991 you do realize that this is a truck and does not have a strut tower right man?if you look at my new vids you will see the grounds go straight to the frame

[nickfs442]

love your truck man. awesome

[INSANEFREAK1]

wats the sites name

[jonmanch3st3r]

@INSANEFREAK1 darvex

[turbo1234a]

hey man i was just wondering did you make the video on how you had run your stinger volt meter i was jusr wondering hit me back....thanks

[jonmanch3st3r]

@turbo1234a no i havent but thanx for reminding me man,4got all about doing that actually....ill get that done tonight

[turbo1234a]

so you ran the pos from the meter to the pos on your chrage line and the neg to your frame or battery neg?

[jonmanch3st3r]

@turbo1234a when you get the meter there are 3 wires,black red blue...i wired up the black and red constant that run the unit to my radio that way it turns on when the truck is started,then u run the blue wire to where ever you want to know the voltage from,once installed you have to adjust the voltage with a screw....i think ill make a video today to show exactly what i mean since alot of people ask about this

[turbo1234a]

hey man i was just wondering where did you hook up your stinger voltmeter?

[jonmanch3st3r]

@turbo1234a i have my volt meter hooked up to my charge line that runs to my battery bank.

[shannon854]

how did you the batteries to fit batteries rack it's only 10'' long i know i have the same truck

[jonmanch3st3r]

@shannon854 all i did was cut out the tray on the outer edge to make it fit because its a tad long...the width is fine tho and it can get bolted in with the stock battery holder

[antalston25]

if you still have the avh 5700 u need to get a cdib-100 for the ipod hook up

[jonmanch3st3r]

thanx man i still have it ill look for that cable now

[cuts260]

hey man on the 18 btl did you get dual 1 or dual 2 ohm woofer?

[jonmanch3st3r]

i went with the dual 1 ohm...its wired up to 2 ohm becauce the amps cut out when wired to .5

[cuts260]

cool man, thanks! i know there are alot of pussy's out there talking shit about your vids but those kinds of people never get anywhere in life, and hate on others to feel better about themselves so keep doing what your doing. awsome build.

[jonmanch3st3r]

thanx bro,they just think every1 is made of money and can spend 3000 on 1 amp so they get off on talkin shit,but hey if thats wut makes them happy they can go for it im not losing any sleep over it..when this build is finished there will be no weak links it just takes time and alot of money

[sulfer420]

lol you still ran 4 gauge with a 5000watt amp on a btl.. sounds really good now

[jonmanch3st3r]

ya the 4 gauge was from the first system which was 2 12s....but the 0 gauge deff made a big difference

[Sencheezy]

can u spell that website that you recommend?

[Marweezy91]

its "darvex"

[Monkeypumper420]

Gotta love that 1/0 copper staring ya in the face! I love opening the hood to show off the cables. As soon as you pop the hood, they know you aint fuckin around! Looking good bass brother!

[jonmanch3st3r]

thanx for the support man,its deff an eye opener when the hood gets popped...i need to get some reaction vids for that because its priceless the shit they say

[stage1spl]

those 0 gauge are true monsters..