@dsmuts i have a new pulley (it pushes 11psi not sure the size) and new wires+plugs that my dad put on previously. how would i tell if there is KR at WOT?
@Gin132456 Most likely you put a 3.4 pulley on it. What other mods do you have? You can tell if you have KR by scanning it and to do that you'll need an aeroforce gauge or if you have an android phone you can dl torque and then you just need a obd2 to bluetooth adapter.
@lt1jason im getting 5-6* of knock in this video, come to find out this was before i got an aeroforce gauge and my tune. My car isnt modified much here, just exhaust, homemade intake and 3.4" pulley. my overkill pcm woke it up. with that i was getting 3* at the 1-2 shift but it stayed bellow 1* all the way up to 100. Working on a custom tune now with HPtuners
@lt1jason Yea i guess so. This was with a 3.4" performance pulley and no tune. I was getting 5*+ KR. Now im on overkill tune i have dam near zero KR. Im working on a custom tune as well, bumping up timing and fueling a bit. This run was also with a vaccum leak off the EGR that at the time i did not know about.
I have an overkill cam (right about the same lift as a S1X) and full install kit but choose not to install because i didn't want to go that deep into this motor (its my DD) and affect the smooth driving characteristics. So once i sell all my stuff, rockers are for sure next lol i just dont want to blow my transmission too soon with to much power.
My plans are rockers and a Gen V/N* and thats it (maybe) haha
Nice!
03blackgsx 1 week ago
Nice run! Looks like 0-60 in well under six seconds. That's pretty quick!
codymiller1994 3 months ago
whats KR if you don't mind me asking?
patrickpl94 4 months ago
@patrickpl94 Knock retard, the computer pulls timing when it sense knock to save the motor.
dsmuts 4 months ago
@dsmuts i have a new pulley (it pushes 11psi not sure the size) and new wires+plugs that my dad put on previously. how would i tell if there is KR at WOT?
Gin132456 3 months ago
@Gin132456 Most likely you put a 3.4 pulley on it. What other mods do you have? You can tell if you have KR by scanning it and to do that you'll need an aeroforce gauge or if you have an android phone you can dl torque and then you just need a obd2 to bluetooth adapter.
dsmuts 3 months ago
looked like a 6 (give or take) sec 0-60... not bad for such a big luxury sedan!
Artyfil 1 year ago
your car is weak on top end. KR city!
lt1jason 1 year ago
@lt1jason im getting 5-6* of knock in this video, come to find out this was before i got an aeroforce gauge and my tune. My car isnt modified much here, just exhaust, homemade intake and 3.4" pulley. my overkill pcm woke it up. with that i was getting 3* at the 1-2 shift but it stayed bellow 1* all the way up to 100. Working on a custom tune now with HPtuners
allblackls 1 year ago
@lt1jason Yea i guess so. This was with a 3.4" performance pulley and no tune. I was getting 5*+ KR. Now im on overkill tune i have dam near zero KR. Im working on a custom tune as well, bumping up timing and fueling a bit. This run was also with a vaccum leak off the EGR that at the time i did not know about.
allblackls 1 year ago
I have an overkill cam (right about the same lift as a S1X) and full install kit but choose not to install because i didn't want to go that deep into this motor (its my DD) and affect the smooth driving characteristics. So once i sell all my stuff, rockers are for sure next lol i just dont want to blow my transmission too soon with to much power.
My plans are rockers and a Gen V/N* and thats it (maybe) haha
allblackls 2 years ago
get rockers. Mine has just rockers and downpipe and we're about even. (no pulley, no headers)
You'll get into very low 13s with 1.9s. Good luck!
(vid on my profile btw)
danilafalaleev 2 years ago