Stringing the Sidewalls :: Brendan Mundorf

[Noahenri]

Great help...I was stringing the same head

[laxislife991]

@Benzino2013 an i will keep the mesh tighter and lock it into a certain place, 1's let the mesh move a little

[loudYOITSJOE]

what shaft is it

[Benzino2013]

what is the difference between doing an i verses a 1? I know what they are and how to do it, but i dont know what they would do to a pocket or certain area of a stick

[gorges11]

can anyone explain how to double up on the sidewall i always here about it but i never saw a video explaining it

[freshflyneverhigh]

I just strung the best lacrosse stick ive ever held thanks to this.. My recommendation is that you string your pocket higher than him because he likes a medium pocket. high pockets have a quicker release. plus for shootings strings he uses two V's and two nylons i thinkk... Do one V and two nylons for smooth passes and deadly shots. I took a risk cuz this is my first time stringing and i decided to string my new superpower 10 attached to my swizzbeat superlight shaft... it worked lik a charm!

[fntm12]

@freshflyneverhigh i get your point and it totally helps me because im a middie but mundorf is an attack thats why he doesn't need a killer shot its just catch and dump or a little shot

[PoopieStanes]

@jclynch5 add whip by tightening the shooters... :) pretty easy

[voy98765]

Can the same channel be made by going thru the back (face) of the mesh the whole time?

[lxrocha]

omg the head slipped and the sidewall peeled off the whole side of my finger

[Laxbroo20]

throws great



[wheatonlax7]

1 1 1 k 1 0 2 1 0 1

[beastoflv]

is he using soft mesh??

[Colorationz]

@beastoflv hardd

[14cdanielson]

It looked like it was 1,1,1,i,1,2,1,no mesh just through hole, 1.

[RDFmusic4]

@14cdanielson nope 1,1,1,si,1,2,1,0,tie

[14cdanielson]

@RDFmusic4 si, is the same thing as i.

[RDFmusic4]

@14cdanielson not true. si is when you go thorugh the sidewall, make your interlock, and come through the front of the mesh.

[WONEDnoob]

What is this sidewall pattern? like i,i,i,2,2,1. etc.

[LaxerDude25]

@WONEDnoob no its like 1,1,1,i,1,2,1 or somethin

[SheepsThatMoo]

Search sheepsthatmoo to see a great lacrosse equepment review

[OxygenMcgee]

Hey guys, I need a little info. One of the sidewall holes broke on my super power. I was wondering if I can just keep using it, restring it, or have to get a new one. It broke near the mmddle, so im assuming that i can just restring it. But not sure. Thanks.

[MrLzlax0190]

@OxygenMcgee if it broke all the way through the sidewall hole then youll have to restring it and skip that hole on each side. if its just a little crack then you can just leave it

[OxygenMcgee]

@MrLzlax0190 Thx man.

[xlBreeZzy]

see the pad things to the right laying on the table at 4:20? can you buys those seperately??? PLEASE RESPOND :)

[lacrosse604]

@xlBreeZzy not quite sure, since its a smaller accessory i think you would find it mostly in STX mesh kits, i dont think you would be able to find those separately but im not 100% positive about that

[xlBreeZzy]

@lacrosse604 bacuase my foam one on my proton power ripped and i REALLY need one

[MrCjhockey7]

Thanks now this is how I always string my sidewalks

[unltdboom]

at 0:58 he says after i come... through the mesh

[jclynch5]

I strung my Clutch similar to this and when I shoot side armed, it releases to soon. What should I do?

[hell67]

i cant get a high pocket on this any suggestions patteren i,i,2,2,1,11,

[jack73737]

@hell67 interlock (i) at the top. do that for the first few holes, and then do 1i or 1u (go through 1 hole and then lock the next peice of mesh the plastic by going under the hole and coming out the bottom.)

[MrLzlax0190]

@hell67 make the 2nd i a 1 that should help

[lacrosse604]

@hell67 either work the stick in a little more or make the first 1, a 2. it depends on what head you have too because if it has a lot of sidewall holes its easier to work with. what head do you have because then i can tell you what else to do and then i know what your working with

[xlBreeZzy]

@lacrosse604 look at my other comment please

[Batti2323]

Brendan - excellent instruction! Very clear and easy to follow. Please finish the series!

[TizzleSTX]

@xAODsportz All good man! Appreciate the kind words too and glad my videos helped you. Agree my way is less complex as my intention was to make a very basic video that was easy to follow.

[TizzleSTX]

Guys I think Mundorfs accomplishments speak for themselves... This is the way he strings as it fits HIS game. He likes for the ball to sit in one place and not move around. My stringing videos are for a larger/longer pocket as I wanted to be as universal as possible so kids at every position could use it.

[LaxBroWitSickFlow]

@xAODsportz why? whats so bad about his way?

[UndefeatableMonkey]

its better to do a hold knot for the top few so the whip stays the same

[laxany1]

What shaft is that

[TizzleSTX]

@laxany1 Its a black KatanaSC shaft