Mal ne blöde Frage wie habt ihr die Wasser Flaschen zusammengeklebt dass ihr 6 Liter rein bekommt. Ich habs auch schon probiert aber die waren immer undicht.
Also n paar kollegen bauen mit mir im moment wegen technik in der schule ne wasserrakete, und sina am experimentiren, wir krigen das ganz gut mit "Pattex Repair Extreme" Dicht...aber einfach wenn du muffen benutzt aufsetzen, und vorsichtig(!) bügeln, dann schrumpfen die teile ein wenig und sie sitzen passend ineinander, so ist es meist ohne kleber dicht^^
Hallo WaRa-Bauer. Habe die Rak mit der SST Klebetechnik zusammen geleimt. Goggle im Netz mit den Begrieffen "SST" und "Wasserraketen" durch. Da findest Du eine Menge Tipps. Gruss und immer genügend druck in der Flasche ; )
You could have re-used the pressure vessel. They can take quite some crashes before they weaken.
But of course it is best to re-test the strength of it, with the pressure vessel full of water.
Nice rocket anyway. My parachutes are even less reliable; yours was not bad at all. But I have no electronics to replace after each crash. Did you modify the servo, or does your timer output PWM signals?
Thanks for your comment. The electronic parts of the rocket was quite good protected. I could mount this part without any problems into the new rocket. I modify the servo without PWM signal. Just with two end switches. Regards Ronny
Excellent video and in-flight footage! With that first deploy it was like oh-oh will the parachute come out. Did you find out why the deployment failed on the last flight? 5/5
I'm sorry but I don't know why the parachute failed. The recovery system was destroyed. It is very strange, because you can hear the sound of the servo motor on the highest point. I'm not sure, but it is also possible, that I taped the door to the parachute camber. If it's true, it would be a very silly failure : (
Sehr gute Anleitungen findest du unter "AirCommandRockets" punkt com. Viel Spass
Illauerli 17 hours ago
Könnte da mal jemand ein Video machen wie man ein Fallschirm
an eine Wasserrakete Dran Montiert, oder anbaut ??
MarineOnePilot 18 hours ago
da müsste mal jemand ein Video machen wie man ein Fallschirm
an eine Rakete baut.
Das wär cool
MarineOnePilot 18 hours ago
Very nicely done!!
JAHarrell46 7 months ago
Mal ne blöde Frage wie habt ihr die Wasser Flaschen zusammengeklebt dass ihr 6 Liter rein bekommt. Ich habs auch schon probiert aber die waren immer undicht.
BigBale1 1 year ago
@BigBale1 Sieht aus wie Heißklebepistole:)
Spidermoritz 8 months ago
@BigBale1 Pu-Kleber oder Kunstharz
Master0fDeasater 6 months ago
Ich verwendete hier eine "Fly cam one 2" diese kostet etwa CHF 130.--
Illauerli 1 year ago
sind söttigi cams tüür?
PortalStillAlive 1 year ago
Mit Druckluft und Wasser. Sonst nichts.
Illauerli 2 years ago
Tolles Video. Macht Spaß.
kaybuch 2 years ago
cool
pudresful 2 years ago
wie lässte die starten kompressor oder handpumpe ????
Mortadeller10000 2 years ago
Mit einer Handpumpe. Seit neustem auch mit einer Taucher-Druckluftflasche.
Illauerli 2 years ago
jo jungs ,echt super geiles video !!
sowas schau ich mir gerne an !XD
230juli 2 years ago
coole rakete fliegt schön ruhig
Timmeyable 2 years ago
Was für eine Kamera haben Sie hier benutzt?
MoritzSimon03 2 years ago
Eine "FlyCamOne2".
Illauerli 2 years ago
haste mal mit Badeschaum propiert
benni1879 2 years ago
Ja, schon oft. Siehe mein Video "Wasserraketen - 7 liter - 125 m - Waterrocket"
Illauerli 2 years ago
ohh das ding ist abgekackt ich will auch solche dinger baune geht das auch ohne elektroneik oder so ich sehe das zum 1. mal
Sebbinator96 2 years ago
Ja, das geht auch ohne Elektronk. Google dich einfach durch das Internet.
Illauerli 2 years ago
song?
ashampotekk 2 years ago
I've already asked which song is that in the background, but IIIauerli don't know it.
MrFroschkoenig 2 years ago
That's "La Femme d'Argent" by "Air", Album "Moon Safari"
tomicono 2 years ago
Wie heißt die Hintergrundmusik??
MrFroschkoenig 2 years ago
Sorry. Keine Ahnung. Irgendwo vom Internet.
Illauerli 2 years ago
Also n paar kollegen bauen mit mir im moment wegen technik in der schule ne wasserrakete, und sina am experimentiren, wir krigen das ganz gut mit "Pattex Repair Extreme" Dicht...aber einfach wenn du muffen benutzt aufsetzen, und vorsichtig(!) bügeln, dann schrumpfen die teile ein wenig und sie sitzen passend ineinander, so ist es meist ohne kleber dicht^^
gnwp1 2 years ago
Hallo WaRa-Bauer. Habe die Rak mit der SST Klebetechnik zusammen geleimt. Goggle im Netz mit den Begrieffen "SST" und "Wasserraketen" durch. Da findest Du eine Menge Tipps. Gruss und immer genügend druck in der Flasche ; )
Illauerli 2 years ago
kannst du mir sagen wie du die klebst weil bei mir ist irgentwas immer undicht =(
Morgi4life 2 years ago
schöne Rakete! was für eine Düse hast Du benutzt?
wolke14 3 years ago
9 mm. Gruss.
Illauerli 2 years ago
echt schöne rakete und tolle aufnahmen, aber kannst du mir bitte sagen wie du mit der kamera die höhe feststellst?
Mikespin170 3 years ago
Hi,
You could have re-used the pressure vessel. They can take quite some crashes before they weaken.
But of course it is best to re-test the strength of it, with the pressure vessel full of water.
Nice rocket anyway. My parachutes are even less reliable; yours was not bad at all. But I have no electronics to replace after each crash. Did you modify the servo, or does your timer output PWM signals?
Regards
Soren
skuula 3 years ago
Hallo Soren
Thanks for your comment. The electronic parts of the rocket was quite good protected. I could mount this part without any problems into the new rocket. I modify the servo without PWM signal. Just with two end switches. Regards Ronny
Illauerli 3 years ago
Wie löst du den Fallschirm aus?
-Mit einem Timer oder Neigungsschalter?
Pyrofighter1000 3 years ago
Ich löse den Fallschirm mit einem Servo aus, welcher mit einem elektronischen Timer angesteuert wird.
Illauerli 3 years ago
Excellent video and in-flight footage! With that first deploy it was like oh-oh will the parachute come out. Did you find out why the deployment failed on the last flight? 5/5
gk123434534 3 years ago
I'm sorry but I don't know why the parachute failed. The recovery system was destroyed. It is very strange, because you can hear the sound of the servo motor on the highest point. I'm not sure, but it is also possible, that I taped the door to the parachute camber. If it's true, it would be a very silly failure : (
Illauerli 3 years ago
Huere geil!
Gruss Reto
retobuechel 3 years ago
That is so cool, i wish my rockets go that high!!!
Das ist so cool, ich möchte meine Raketen gehen, dass die hohen!
tomstanton5 3 years ago
Dude, that is some of the best "on board" film footage I have seen! Respect!
Nice dual-parachute system too. How do you deploy them?
R.I.P. Aquarius II :-(
Du kannst ruhig auf Deutsch antworten, ich verstehe besser als ich schreibe, bin halt Engländer... ;-)
MuckyMcPuppy 3 years ago
Thanks for your nice comment. I deploy both parachtes with a mini servo motor which controlled by a electronic timer system.
Best regards
Illauerli
Illauerli 3 years ago