Anyone have any problems getting the radio to sync to the heli? Here's what is happening to me:
I just got this yesterday - when I received it, I immediately took it out of the box and connected the heli to my computer via USB to charge it. The red ligth in the USB connector came on as soon as it was inserted to the port, even though the heli wasn't connected yet - I was under the impression that light indicated whether the heli was charging or not, but in my case, it seems to be alwyas on
While connected, I installed the batteries into the remote. I turned both the remote and the heli on, and was able to get the main rotors to respond...didn't notice the tail rotor, but I dont think it turned.
I then turned off the heli so it could charge fully. About an hour later, I tried using it, and NOTHING worked.
I then started looking online for help, and found this video. When I try to "sync" the remote, the red LED never goes "steady on" - it just blinks faster once I move it all the way up, and continues to blink fast when I move it back down. It never goes steady red, and I never get the heli to respond to the remote, even though the LED in the heli does blink as though it's been detected.
I'll probably have to RMA this, but wanted to know if anyone had suggestions. Thanks!!
@zombiecurse9 you can buy a full gear system for $6.95 at Team-RC.com my lower rotor quit working and I realized that the tiny gear had come off and was sitting inside the head casing of the helicopter. I spent 2 hours trying to get it back on the axle. I succeeded, however I damaged that tiny plastic gear with my tweezers. Now the teeth don't run smoothly along the lower gear that runs the lower rotor.
@zombiecurse9 hey i had the same problem. what was wrong was that there is a small rotor connected to the motor that can easily fall off. soo if you cant find it (which is almost impossible to find) it wont work again
@zombiecurse9 I had similar problem just that my upper rotors don't want to work..Can anyone help me fix it..I just got it and it fell and the upper ones don't work..Is something loose..is it an easy quick fix or is it busted for ever?
Anyone have any problems getting the radio to sync to the heli? Here's what is happening to me:
I just got this yesterday - when I received it, I immediately took it out of the box and connected the heli to my computer via USB to charge it. The red ligth in the USB connector came on as soon as it was inserted to the port, even though the heli wasn't connected yet - I was under the impression that light indicated whether the heli was charging or not, but in my case, it seems to be alwyas on
lenknermj 11 months ago
While connected, I installed the batteries into the remote. I turned both the remote and the heli on, and was able to get the main rotors to respond...didn't notice the tail rotor, but I dont think it turned.
I then turned off the heli so it could charge fully. About an hour later, I tried using it, and NOTHING worked.
lenknermj 11 months ago
I then started looking online for help, and found this video. When I try to "sync" the remote, the red LED never goes "steady on" - it just blinks faster once I move it all the way up, and continues to blink fast when I move it back down. It never goes steady red, and I never get the heli to respond to the remote, even though the LED in the heli does blink as though it's been detected.
I'll probably have to RMA this, but wanted to know if anyone had suggestions. Thanks!!
lenknermj 11 months ago
did you order that on a website called talonminihelecoperv3
david1232829 1 year ago
did you order that on a website called talonminihelecoper
david1232829 1 year ago
anyone got a spare back tail rotor mine busted msg me if so
zachxcx 1 year ago
@zombiecurse9 you can buy a full gear system for $6.95 at Team-RC.com my lower rotor quit working and I realized that the tiny gear had come off and was sitting inside the head casing of the helicopter. I spent 2 hours trying to get it back on the axle. I succeeded, however I damaged that tiny plastic gear with my tweezers. Now the teeth don't run smoothly along the lower gear that runs the lower rotor.
ndsl77 1 year ago
hey my lower main rotors are not working. when i try to use it only the top main rotors work. can you help me?!
zombiecurse9 1 year ago
@zombiecurse9 hey i had the same problem. what was wrong was that there is a small rotor connected to the motor that can easily fall off. soo if you cant find it (which is almost impossible to find) it wont work again
MrTstump 1 year ago
@zombiecurse9 I had similar problem just that my upper rotors don't want to work..Can anyone help me fix it..I just got it and it fell and the upper ones don't work..Is something loose..is it an easy quick fix or is it busted for ever?
Chris151495 1 month ago
does the remote for this have a trimmer??
Garen1234 1 year ago
@Garen1234 yes this helicopter remote dose have a trimmer....
TheRotel101 1 year ago