Nissan 200sx s14a silvia project (2007)

[Mackedinger]

sway bars????

[abreut200sx]

@Mackedinger , this video have 4 years now... sway bars have 3 years old now :)

[Zbox3000]

ill give u 200.00 for it

[themantouf]

how much did u put on it pretty clean job there

[kozarac95]

Classic look, one of the best clean silvias ever modded!

[RippedLives]

nismo fanboy much?

[S13noGRIP]

ohhh i think my dick moved.

[twostickmapex]

how many hours and cash u got in it

[cadishma]

nice project brother

[laurentravis2]

straight sex:)

[roflmao1223]

You should have installet a LSD.. And when you upgraded the turbo, why didn't you install a front mount intercooler aswell?

[abreut200sx]

That was 3 years ago, now i have a kaaz 3 way. The turbo in the pics is a stock t28.

[bayker066]

@abreut200sx ... u mean a 2 way i assume?

[abreut200sx]

@bayker066  off course yes

[peter200sxs14a]

tio, no me canso de ver el video, esta increible, tenemos que estar en contacto para ir comprandote cosas para el mio, te veo por el foro, un saludo.

[razielus20]

the video itself is bit lumpy.. project itself is very very nice tho:)) keep it on;)

[peter200sxs14a]

es una autentica maravilla, yo tengo uno, en el mismo color, ahora resido en burgos, aunque soy de las palmas, me gustaria saber si te puedo encargar piezas para el mio, y si me puedes asesorar un poco, muchas gracias, y sigue disfrutando del sivia tanto como lo hago yo, un saludo

[J4NK1]

U need better LSD or some welder mate

[pfcalliance]

dude you are one lucky and loaded mother fo, lush project!

200 SX fucking rule!!!!

[NiGhtKids1982]

i have s13 for sr20det motors...

[NiGhtKids1982]

well 10 speed better.i dont care speed 215 hp silvia my s13.

[abreut200sx]

I dont understand what you mean

[motocross321]

Also where did you get your red trim from? Thanks.

[abreut200sx]

Hi, for 350hp i would sugest 550 and for 400hp 650 or more.

You mean that you have 350hp in a non turbo ewngine?

I dont know anything about ka24de, here in europe the s14 came with sr20det.

I dont know what do you mean with trim...

regards

[motocross321]

Thanks for the info on the fuel injectors and yes it is all motor I have no turbo on it yet! As for the trim I meant the red around your radio or stereo and around the shifter.

[abreut200sx]

Hi, its incredible that you have double the stock power in a NA engine...

The radio trim is just painted with the same color as the car

[motocross321]

Thanks the engine has not really that much but here is a small list of what I did. New Stainless Headers Whole new rebuild on the engine New pulleys Stage 3 clutch and flywheel After market intake Racing Spark plugs and wires Racing radiator and fans Silicone radiator hoses Nismo thermostat Greddy Oil Filter Bored fuel rail and thanks to you bigger fuel injectors! Walbro 190 fuel pump Oil catch tank Short shifter High flow cat Performance chip 50 hp & torque

[motocross321]

Is there anywhere I can get a lsd below 3 or 400 dollars for a ka24de. Can you help me with one thing? My car is now a 350hp and I was wondering what size of fuel injectors I should upgrade to? Would 440cc be good or do I need bigger and the engine is all motor non turbo. Thanks. Awesome car man annd Great video! 5/5

[iamgamer1994]

can any one give me adivce?? plz. i want to do the same car. but idk what to start with. ive heard i shoud start with an exhaust and a cold air intake. is that godd or bad? and what do i need to lower my car

[abreut200sx]

Hi, i will start with intake, exhaust, walbro fuel pump, ngk 7 iridium plugs and boost controller, all toghether, and if you still have money a front mount intercooler will give safety to your engine and improve hp. Second step will be ecu upgrade for safety when you continue increasing boost and bigger injectors.regards

[iamgamer1994]

thanks man. ill look forward to starting with these parts. i couldnt find anywhere telling beginners what to start with on a car

[abreut200sx]

Where are you from? im sure there is some forum where you can learn, we all learn in forums

[iamgamer1994]

south carolina

[bielakxxx]

Ok :D Now it's ok for me :D . In my garage is s13 and s14a ;). All the best

[bielakxxx]

Ok , everythings are ok but one thing very is the FMIC ?? biger turbo on board , 3'' exhaust and oem ic ?? Get to breath that monster ;)

[abreut200sx]

That was in 2007, take a look at the 2008 project in my videos.

Now in 2009 its 350hp with gt2871r, and im making a forged engine to getaround 450

[joshyxfamous]

not a big fan of the seatbelts but no biggie, beautiful car man, i start my s14 project next summer

[iSTARKiNG]

nice cockpit

[natman48]

such a pity about the sound during the video parts..

[BASTILEON]

pues en cuanto me compre uno(que tengo pensado en comprarme uno) y necesite algo ya sabes a quien voy a acudir XD.SALUDOS

[BASTILEON]

eres de españa¿...ostia macho...lo tienes...no comment...de donde hs comprado todas esas piezas?e

bay?

[abreut200sx]

Si, soy de canarias, me dedico a la venta de este tipo de piezas ;)

[zreiscool]

good thing you dont live in southern california, your car would be stolen and strippled to the last bolt...

[sgcwproductions1]

5:09 is a TPS?

[Flip355]

fantastic tuning m8! Left bodywork standard, very good. I only miss improvements in brakes, very important!

[abreut200sx]

Thanks. That was in 2007, i now have ksport front 330mm 8 pot brakes and z32 rear brakes. regards

[punkrboi]

beautiful kouki... even though u spent 30k it still isnt done... the exterior looks awkward without rear valences or a silvia rear bumper... is this a track car? like for drifting

[abreut200sx]

of course it still isnt done, i need to spend another 30k in it to fishish.... will need 3-5 years more.

I prefer grip than drift, so its most a track car

This video was 1 year ago, have to make a new one with the actual appeareance and many new mods...

[punkrboi]

i like how your updating the inerior along with performance!!! im duin a sileighty project but its also my dd so when i blew my head gasket i had to fix that myself cuz i didnt want to pay $1600 for it... and i just did all around brakes for around $150 (not z32 just replacement rotors and pads)... but i have done some bodywork but cant paint til the sileighty is all ordered

[abreut200sx]

The interior had changed now, have bride seats fitted, steering wheel, and all the red painted parts are again stock black

Are thinking about anti roll bars and take out the rear seats, and takata belts

Love the sileighty, here in Spain i dont know anyone that have done the conversion

[punkrboi]

if you take the rear seats out, put a cage in there to fill the space.. itll look weird w/o rear seats... you could even paint the cage red to match everything...

im starting to gather sileighty parts soon, im gunna go slow while doing this so i could get the best deals cuz i dont wanna pay $1000 for the conversion, im looking to pay about $600

[abreut200sx]

Off course, the roll cage will be there, an apex performance, but painted in white

regards ;)

[punkrboi]

how much did your SR run you in price?

[abreut200sx]

In europe the s14 came stock with the sr.

Is that what you mean?

[djrno2]

hay how much u spendt on this car ? ;) and whats the 1st song name ;)

[abreut200sx]

About 30k usd including the car

the song is "take a look around" from limp bizkit

[jurasos]

bad driving

[blackrabbit96]

Looks like you need some suspension bits i.e.

Rear Camber arms

Rear Toe arms

Rear traction Arms

A a 2 way diff son!!!! then your shit will do mad donuts not the pityful effort you did at the end of the vid

[holdencomodorevsss]

get a holden u pussy i will bet you that my holden commodore vl turbo will blow your 200sx my vl has 551 hp at the rear my turbo in runing 20 psi i can get it going a 34 psi on a cold nite but dude 200sx are fucking SHIT

[abreut200sx]

hahaha, what an ugly car that one! never have seen one, no mather how much hp you have or how much you accelerate, that "taxi" is fucking ugly and old car, and it can only go straight, my 200sx is faster in the track with 200hp less

[veilside2403]

rb30det.. nissan engine.. :)

[PiezPiedPy]

RB30DETT = even betta :)

[veilside2403]

dude you talk all high and mighty about your VL turbo when the fact is its only that quick cause it has a skyline engine in it :)

[siryak10]

man that shit is crazy love the car...looks so aggressive

[eiffeduden]

Sweet ride man

[Emil1787]

Damn man you crazy in a good way, i mean i do respect what you did with your car it is totaly insane and you have a lot of skills and experience i see, but shit how much money did you put in it 50.000$+ lol but still it is very nice and sweet ride. And for painting i would suggest Atomic green and blue vaniles

[nutzuXL]

very nice project . what is the price of the pieces that you needed to upgrade your engine ? it has 600hp now ?

[mckloven1]

Hey where did u order ur parts from

[abreut200sx]

I have a performance parts company

[lIlDuDElIl]

decent car yo. i have a 95 240sx n im makin it my project but i need it to convert to stick lol. im plannin to put rb25. but for now i think imma get the coilovers. n paint it on ALL ORANGE w/ a carbon fiber hood!! LOL. anyway nice car.

[Biglarrapen5490]

it must be really nice knowing as much as you do about cars. i would love to get into cars like that but i went with the construction trade instead. nice 200sx though

[okininamkano]

guys building a 240sx is easy and alot fun..compared to about 5 to 8 yrs ago before the swap greatly increased, the swap and build this days are now alot easier...parts availability are more to come by...there's alot more info on the internet..all it takes is effort.

[drewce123]

lol aprox how much u think u put into the car with out repairs?

[drewce123]

wow realy nice car 5stars how much have u spent on the car ?

[abreut200sx]

3 times the amount of the car when i bought it,hahaha, have broken the engine 2 times :(

[LancerGTIbloodevil]

n1 mate ... do you already test the horsepower in the machine? 300hp?! 350hp?! lol

[abreut200sx]

Havent dyno tested but its around 300 yes, just waiting to install forged pistons and rods i have already bought, and a bigger turbo, injectors and a aem or power fc ecu to reach 450. After that no much more engine components, i will start to get money for a quaife ger box

[LancerGTIbloodevil]

Did  you remap it by now?

cheers

[abreut200sx]

Yes, i now got a stage 2 remap from Jez at h-dev, now i have fmic, nismo 555c injectors, FPR, front upper mounts, sway bars,some exterior mods and a few more things i forgot sure

regars

[tichard06]

nice car and set up man...the only thing i didn't like about it was your body kit..get a new one man.

[abreut200sx]

The bumpers are the original ones. Im looking for a kit but first i prefer to spend money in increase power than exterior mods.

[conwest]

sickest s14 ever!

[cutesk8erboy]

fuck ya dude!!! amazazing

[vikinghallen]

HOLY SHITT!!! thats one hell of a nice 200sx:D

[LaConchi]

one of the most beautiful silvias ive seen in a long time!!! well tidy keep up the good work peeps seriously, good to see you left the bodywork stock cos it rulez!!!!

[abreut200sx]

Will leave the exterior nearly stock, z edition rear lip, Jdm wing, carbon fiber hood and open a little bit the stock front bumper, customize for more air to the fmic. regards

[kotsiosdaf]

fantastic s14 in my opinion your first choice shoud be an engine swap with the rb26det all the other was good

[abreut200sx]

I dont think so, put a rb26dett is about 7.000, with that money i can do the engine completely forged and put 500hp, also the sr20det is much more lighter than the rb, for a drag car, ok, but not for a track car. regards

[bebop00]

ok I've been looking all over for that front chin spoiler. Where did you buy it from and how much? Please don't tell me it came with the car or else I'm gonna cry.

[abreut200sx]

All the exterior of the car is stock ;)

[dbunderground7]

sick ass car.. anyway what song was that at the beggining?

[abreut200sx]

take a look around, limp bizkit

[dbunderground7]

thanks

[dbunderground7]

thanks

[EnDrIuSX]

Fantastic s14a!!

[LancerGTIbloodevil]

very nice endeed... whem you do the remap post more info :D

My will have a remap soon ...

Cheers

[abreut200sx]

I recomend you jez at horsham developments for the remaps ;)

[LancerGTIbloodevil]

Hi there i have a s14a too ... very nice project ... how many horsepower do that have?

[abreut200sx]

263hp at 1 bar, but i need a remap to give all the power this mods give me.

[swordmurat]

gokhanoluk ne dion cocua ne güzel yapmış:)

[gokhanoluk]

you have to change your lsd. it seems to be worn.

[abreut200sx]

i know, probably in some months i buy a kaaz 2 ways

[Hollywoodrift]

I have never been in so much aww at a silvia s14 video. This is by far the best s14 ive see on here. I cant wait to get rid of my s13 and get my s14 in a few months.

[abreut200sx]

Thanks a lot ;)

For me there are a lot of s14 better than mine, but i love mine :D

[nissanSfourteen]

Amazing S14a you got!!!

[lukasnus]

RESPECT!!! one of the best s15a here.. maybe.. the best.. i love it.. can u send some better vidoe with the sound of the car/ its crap here now.. i cant hear the engine..

[abreut200sx]

I have made over 20 videos some days ago, will mix it and upload a new video soon ;)

[lukasnus]

thats great.. so.. now a nice clean bodykit.. and.. a better color.. heh..

[abreut200sx]

I prefere spend that 2000 euros in a stage 2 clutch, fmic, vvt, nismo 555cc, stage 2 chip and a sticker,hahaha

Maybe in future i will change color, but i think no bodykit, open the front bumper for the fmic, a kouki jdm spoiler and a srb rear lip, and thats all

[mckloven1]

hey i sold my 95 im tryin to buy a hatch back but does ur company have a website

[gilblob]

wow you gotta be in love with your sick car