1.6 Mivec 171 bhp

[MsSammy704]

i live in puerto rico and i will love to have a mirage hatch i just dont know how to buy one and ship it over here ?

[summitsvift]

@MsSammy704 you want LHD or RHD ? Normal Colt in Europe is only available with 1.3 an 1.6 Sohc engines, RHD Cyborg is very rare and can only be found as grey import in Uk or Ireland

[fintovtec]

thats a nice minty lookin mivec..

[TequilaAssassin4eva]

damn I want that car...the Mirage hatch is a beautiful car

[ramcharon]

this is a nice car. but i have a mirage 4g93 soch torbo all custom built by me. but am trying to get that mivec motor i would really like to know how i can get it cause am in florida and we dont have it here

[Stoyemz]

@summitsvift Not true dude my 4g69 lancer was Dyno'd with 238 tourque not bad for an NA 4 cylinder

[poisunoskid]

171bhp from a 1.6, i like it. good stuff n a unique car.

[Spetsnazovets]

If you get sick of driving a high-revver, the 4G63T slot is directly :) I've seen a Mirage with a complete Lancer Evo driveline transplant. I was in my friends Honda Prelude and he was driving. The Mirage left us for dead lol

[summitsvift]

@Spetsnazovets I know I know that would be my dream swap, maybe one day I will source same smashed Evo from Uk and get it to work in Mirage

[Spetsnazovets]

@summitsvift Apparently Evo 6 would fit too as they have almost identical chassis just with different panels.

[summitsvift]

@Spetsnazovets I have seen few EVO colt 's, 4 5 6 will fit with a evo 4 driveshaft , than need to remove transfer box and convert it to FWD , the only problem is you can get old evo really cheap those days so why ruin Mirage.

[Spetsnazovets]

@summitsvift Anyone can expect an Evo to go faster then most. Imagine the face of say a BMW535I driver when he gets smoked by a Mirage? You should have seen my friends face when that Mirage left us behind as if we were standing still.

[summitsvift]

@Spetsnazovets Good enough reason mate :-) I agree 

[summitsvift]

sorry man it was 158 Nm / 6900 I just found the dyno sheet and power was 171 Bhp /7800. Not much torque in mivec to be honest my Kia Pride is more torquee in lower range but still it get alive after 5000 rpm, it does sound wonderful there so i so drive it that way, and the engine is very smooth in lower revs sometimes i drive it like a taxi man shifting at 2 K and pulling from second gear it does not protest to make a pull from idle. Great engine, super reliable car, shame they never did 1.8

[eohandrew]

@summitsvift you can drop a 1.8 bottom end in

[ozmo69]

love that look

[limpfish1987]

what front bar is that, is that lip added on, or factory or what. looks tops

[summitsvift]

@limpfish1987 this is factory lip in Cyborg 1995-1998 can find it even on some JDM 1.5 standard mirage models. check coltuk.org at sale section and ebay and you should be able to get one. It's ABS not fiberglass one so it can take a lot of abuse !;)

[Gamer7511]

Ive a mirage asti coupe version. Only a 1.3 but looking 4 a 1.6 Mivc enhine 2 put n.. Type n Mitsubishi Mirage exhaust or check out my vids to c my red Mirage

[summitsvift]

@Gamer7511 love Asti version , looks so much better than hatch nice car

[joemivecrs]

hello what have u done to this engin to get such hp?

[summitsvift]

@joemivecrs

not much , Jun cam sprockets , Carisma Gdi JDM 0.3 mm head gasket, fuel pressure regulator and some AFR tuning plus Monster sport exhaust

[summitsvift]

@summitsvift would love to get 4G93 turbo block and do 1.8 conversion to it but it is so hard to get in my part of the world

[joemivecrs]

@summitsvift

which country wer u from? here in my country could easily get 4g93 turbo block at cost about USD400

[summitsvift]

@joemivecrs I m from Poland, not to many JDM cars round here , is it second gen 4G93 T ?u can get easily because that one is really hard to get I ve seen few in Ireland but 1200 Euro price tag

[joemivecrs]

@summitsvift

oh..yea its the second gen 4G93T. yea here can easily get that engine maybe because i live around asian country. there r plenty of importers around here making business on jdm part. too many stock making the price goes down.

neway thanx for the tips. im still looking for jUN camshaft for my mivec. thats stuff pretty expensive in here. it cost about USD600

[summitsvift]

@joemivecrs Sure, here we even drive on the different side man. I would love to get 1.8 block , I could get Carisma Gdi block easily and cheap but it does not have oil sprinklers and might have some other differences.

Jun cams are expensive and u need some high compression pistons to go with them , I stick with RS cams , good for street but got some Jun cam sprockets and they were like nearly 400 usd with shipping from Japan :-)

[Death666wish]

@joemivecrs are 4G92 Mivec's also cheap in your country?

[joemivecrs]

@Death666wish i think so...if full engin then it will cost u about usd1k++

[joemivecrs]

@joemivecrs thats real cheap bro..u know what, nowadays japan r running out of stock..so the price here is getting high and high eachday..and thats suck bcouse i couldnt easilyget parts nemore

[denny1190]

getiing my own mivec gen 1 asti this week or next week can't wait. very clean colt btw

[kidehilario]

is it a 4g92 mivec? 1.6 N.A engine?

[summitsvift]

@kidehilario yes

[kidehilario]

@summitsvift is there any turbo charge mivec?

[kidehilario]

thats awesome men!! really love mivec ...

[rockybigballs89]

thats a very nice car .

[ChrisColt]

stunning Cyborg buddy, and a nice power output, keep up the good work ;-)

[johnnytwomey]

what a fucking sexy car...

[CJ4A]

Hi is that bhp reading at the wheels or at the crank? If so, what is the reading at the wheels?

[PocketAcesPoker]

oh and whats ur car lowered on?

[summitsvift]

Tein coils at the moment and stock rs shocks , lowered 18 mm only

[dwygyfylchi]

that looks awsome!

[tobymac101]

They come on paper saying 175bhp

But after RR i think they normally come out at around 160bhp?

Would i be right summit?

[summitsvift]

mine made 151 first time so was very happy to get 171 after setting up A/F ratio on wideband , new filters , decat etc ..

[PocketAcesPoker]

very nice result fair play lad

big difference from the first time

whats the A/F ratio...wideband?

[mserganigmail]

@summitsvift how did u change ur A/F and so on? what engine management did u use, and what changes did u apply?

Thanks :)

[summitsvift]

at the moment Greddy E-manage blue and fuel pressure regulator , but want to tune it on EVO7 Ecu there is a company in Ireland that have done it. So far I'm collecting parts, need thinner head gasket, bigger TB nothing to major but small engine service at the same time and maybe some head work :-)

[MRmivec86]

@summitsvift

What torque did you make man?

[PocketAcesPoker]

175bhp is on an engine dyno wit 100% octane fuel and brand new engine

160 would be a good average for a mivec

[JonnyDEGreen]

god.......one day.......

[maccodj]

SO SWEET MIVEC! LOVE IT!

[Fiddler1990]

thats a very nice mi-vec...

[robbie6m]

yeah what did it make? gorgeous lookin car that

[PocketAcesPoker]

well wat did it make?