How to do a hair design hair cut with Wahl Detailers #1

[xlaxstarx]

someone help me plezz !!! i whant to do there nice stright lines on the side of my head and i need a vid to show me how

[dezniqqadez]

@bitcheswebe , I used to do that a lot..but u will prolly get used to it with time...if not maybe try a diff liner?

[bitcheswebe]

ok when im doing a design i have no problem with my stars, and my straight lines, but i noticed that when i do my curved lines, in the curve my line is always thicker than the rest, i still make it look good but i would like my lines to all be the same width, any ideas, suggestions on how i can do this better... its hard enough being a white female that specalizes in ethnic and coarse hair, i dont need these lines like this.. plz help.. thanks!!

[darkballerzjuke]

is a detailer basically a razor without clips?? HELP!

[Bayballerz]

wheres the best chain to get ur haircut And designed

[BESTRAPTUPAC]

TO ALL YOUTUBERS ESPECIALLY BARBERS I NEED AN OPINION ON THE WAHL TATTOO TRIMMER SHOULD I BUY IT? IS IT GOOD? PLEASE REPLY

[eyesee21]

I'd love to see a small bow/clip design on the side of a females head..i. e like what Carmen Electra has but with a pretty girly design..have not come across any vids on you tube like that.Wish you could show that..i'd be your model,but live too far!!Thanks,grreat vid anyway:)

[Taunterification]

pierdolenie rezuse

[MySwaggerGoHard9]

nice cut,i just uploaded me cutting a taper fade . i'm a 14 year old barber so don't be too harsh, but please i need your feedback, thanks (:

[fredizzle23]

What do ask for if i want those three laser lines on the temple when getting a fade? i know there has to be a name for them

[pronessman]

Andis outliner... any good ?

[BESTRAPTUPAC]

a 5 star trimmer for line ups and the design he just did is andis t outliner wich he said in the beginning they are the best tool

[Raphy214]

whats your opinion on the wahl five star razor edge?

[dapeoplesbarber]

@Raphy214 Personally dont like them.

[mauridcs]

What brand is the Trimmer?

[EnOnEagle28]

How much do razors and hair trimmers cost?

[dapeoplesbarber]

@EnOnEagle28 That's an open questions they range anywhere from $5 up to $150 ya know.

[mikeyAkAMO]

Ayo @dapeoplesbarber ive been cutting hair for about a year and I was wondering if I can go to barber school with a G.E.D? plz reply

[dapeoplesbarber]

@mikeyAkAMO It varies from state to state in TX yes you can.

[BESTRAPTUPAC]

@mikeyAkAMO YEAH YOU CAN GO ESPECIALLY IF U HAV A G.E.D

[LUCKYHANDS213]

Andis t outliner works best hands down.

[dapeoplesbarber]

@LUCKYHANDS213 Andis are also a very good product.

[LUCKYHANDS213]

Andis t outliner

[AR15AK1]

u can doit with a peanut 2 rite?

[dapeoplesbarber]

@AR15AK1 I suppose you can but it would be a bit harder.

[PivotXMaker54]

stop at 0:35, does any one know wat thats called ? just to get those two lines?

[dapeoplesbarber]

@PivotXMaker54 Some people call those "The Kayne" Lines.

[AntCastro559]

what trimmer do u think is better to get wahl detailer or andis t outliner?

[dapeoplesbarber]

@AntCastro559 There both great trimmers

[luis70658]

@AntCastro559

t outliner works better for me

[aznpimp911]

Can you do that hair style on Asian hair?

[STRUGGLEX3]

this guy can cut badd ass

[dapeoplesbarber]

@STRUGGLEX3 Thx bro

[jerkincesar13]

Raww

[TheSonnywest]

Cool

[805mejia]

@madrigal1017 O thanx

[j4cQu3liiNe]

Nice work :)

[Maviles5196]

YOU! Know how to cut hair my friend!

[CanYuFeelDaBeatt]

Hey Nice Vid,

I want to outline, line-up, shape up my own hair,

but i really am new to this and dont know what machine you use,

can i just use any clipper or does it have to be a T shape or is it a trimmer?

I was looking at some wahl t clippers, will they do?

Thanks

[pimpinlucky1]

@CanYuFeelDaBeatt u kan go with the andis styliner 2 or the wahl detailer theyre both really good and not to expensive id recomend one of these 2

[805mejia]

do you know any barbers in Oxnard that can do this or that can do stars or any designs

[YSKWeXclusive]

@dapeoplesbarber fucking 2 beasty at this shit man good video make texas look good my dude. Im tryna learn how 2 get 360 waves and how 2 cut my own hair and others hair also how 2 line people up and do designs 2. I think the design part is probably the easiest looking

[yert7707]

More vids please I love your attitude and how humble you are!!!

[773ace]

You said its a design off da dome its not suppose to be perfect? Crazy azz hell it gotta be chu digg you gotta make it look the best you can cuz thats your name being put out thereso you gotta make it the closest you can to perfect and I say close cuz aint nothing perfect

[Gera87M]

damn these haters think barbering and doing designs is a piece of cake, dumb fucks then cut your own hair and fuck it up

[dapeoplesbarber]

@AndresWSM209r Then do it yourself homie!

[keeviinnnnn]

Dude I swear you give out the freshest haircuts and nice barber bib in the background saying "we the best" haha you kind of remind me of dj khaled

[dapeoplesbarber]

@keeviinnnnn Thx bro!

[Mrsniper996]

not hating or anything, but dont you thing the arrow is a bit off set? i mean the line joining toward the actuall triangle isnt quite in the center,but you know no one is perfect! but over all great love all your vids haircuts and everything =)

[dapeoplesbarber]

@Mrsniper996 It's a design off the dome bro....its not supposed to be perfect!

[ojostristesmarron]

what kind clipper u use

[dapeoplesbarber]

@ojostristesmarron the clippers Im using in the vid are the Wahl Detailers

[tuxi187]

Whats better the wahl detailer or andis outliner?

[dapeoplesbarber]

@tuxi187 there both really good!

[skatecoolguy831]

@dapeoplesbarber

What do you think is better, the Wahl Peanut or the Wahl Outliner?



[805mejia]

@skatecoolguy831

do you know any barbers in Oxnard that can do this or that can do stars or any designs

[pimpinlucky1]

@805mejia damn u from oxnard i grew up in santa barbara 13 yrs and i dnt thnk they got to many barbers that do shape ups outhere that much i live in chicago now where they get down

[805mejia]

@pimpinlucky1 but do u know at least one

[thebejjanio]

where is your shop located??

[dapeoplesbarber]

@thebejjanio Corpus Christi, TX

[darqportal]

@dapeoplesbarber I'm about 1.5 hrs away

[psppony]

wackk

[dapeoplesbarber]

@psppony Thanks for the support, HATER!

[psppony]

@dapeoplesbarber

yur welcome i would pay 5$ 4 dhat

[opeezy1234]

This design is fresh I'm going to get it

[dapeoplesbarber]

@opeezy1234 Thanks

[unknownbrendle]

@xhibachi24, if your cut n without a license your put n dwn every one that cares about the profession enuff to represent with some education and credentials. that being said, i couldnt give a fuck bout ur opinion of how to b more lucrative in the shop let alone as to which tools that you use to dis our occupation

[dapeoplesbarber]

@unknownbrendle Well said bro.

[banannojoe]

wow never seen a toothbrush used... usually see baby brushes... i prefer just a comb tho

[MrSkaterhaterz]

a crop circle. well kinda.

[calgreen1000]

Lots if propz bra.. Love yur vids

[dapeoplesbarber]

@calgreen1000 thanks for the support!

[xHibachi24x]

I'm no baber, just someone who also cuts hair. I think that if someone were to charge maybe 2 dollars then it would be more lucrative in the long run. If I got my design for 5 bucks and it needed a touchup in a week... I would be hesitant because I might as well just get the haircut... but if it were cheaper, then I would probably go just to get a touchup for 2 bucks

[nKINGv]

LOL, I love the way you said " make an extra 5 bucks" your impression was funny. That kid was probably like DAMN though lol.

[dapeoplesbarber]

@nKINGv LOL naw I always let my clients know how much a design will be prior to be doing it.

[dnaya24]

pretty sick! nice way to make that extra buck..do the other barbers mind if you make videos in the shop?

[dapeoplesbarber]

@dnaya24 Thanks....they don't have no choice...I own the shop! LOL!

[IvanDaKiid]

Nice video!

how much would you charge for a design like that ?

[dlewgz]

@IvanDaKiid 5 dollars. he said it at the very end.

[alanle18]

i love your vids man

[dapeoplesbarber]

@alanle18 Thanks for the support!

[IYION3Y]

nice