Erm. Do you perhaps remember the settings because I spend ages trying to get the settings right and then in the end it doesn't work. Any settings you can remember would be helpful :)
Thanks everyone for watching! Although I do appreciate the comments, can you please bear in mind that this was made pretty much as soon as GMOD 10 was released, So all the smart snapping, advanced duplication scripts weren't even written yet.
Still, I think it's good to know how to do things without scripts sometimes, eh?
now we need to set it to button activate and add a seat, plate thingy above that to hide it, and realistic car stuff :3 and now you have your very own realistic car >:3
Actually if your constraints are wobbly it means your weight balancing is off. So that means you dont know what you are doing, not that something is wrong with the game.
ty vm for this tutorial, it really helped me 5/5 but you should try the snap mod, it makes a virtual grid in every prop so you can weld with precision
I made it with wire hydraulics and advanced numpad controller! It's pretty simple, but I have a big problem with stupidly weak axis! I made almost the same - two iron beams attached by axis on the other one and wheels attached by axises on them. But they cannot support themselves nor the car! I think it is the gmod 11 problem, because they just hang down and don't even hold the straight position if the car is lifted in the air :-\
I have some knowledge how to overcome this now - basically you need to make the beams which the wheels are connected to heavier - then the axis will be stronger.
Also you can axis a wheel on a flat plate so it will act also as a support against flapping. If you understand advanced ballsocket (which is not very simple:) you can attach that plate (or some flat beam) on the upper and also bottom side with angle limited ballsockets so it will allow attached wheel to steer just in a certain angle and it holds quite good then...I can show how to make it if you wish. Write me on steam.
probably but a wheel is a lot better because with hydraulics its going to have to be a lot more accurate and it is also going to delay the steering response because by the time you want it to stop turning you will have to stop it, reverse it, and then stop it perfectly straight.
can someone say me how to change the wheel turning direction.. when i put the wheels on they are spinning in the wrong direction and i cant drive the car i made.. but the vid is awesome man !!
Kudos to you my friend, very clever =D. by the way, if anyone can tell me how to make a Fraps video compatible with Youtube, i'd greatly appreciate it =D, i have a walker to show off =p
me and a friend tried this, we ahve a problem however. As easy as u make it seem for some reason when we add the tires to the steering arms it go hay wire , the tires lay flat and occasionaly get tangled up in the ropes...why is this?
The only reason I can think of is because your tires are really large, and therefore too heavy for the chassis to handle. Using the weight Stool, try making the wheels about as heavy as the arms they are attached to.
I think a way to make a floating vehicle steer like that is to make a same basic chassis but instead of putting wheels on the turning mehcinisim, you put thrusters at the ends.
BTW, sorry, I marked as spam. I accidentally clicked on Spam instead of reply -- twice. Anyways, you're probably thinking about rudders on a plane, but that wouldn't work because the source enginge doesn't have wind. :(
This has been flagged as spam show
Erm. Do you perhaps remember the settings because I spend ages trying to get the settings right and then in the end it doesn't work. Any settings you can remember would be helpful :)
p.s where are the bars? can't find them >.<
VintageTopHat 2 months ago
Comment removed
VintageTopHat 2 months ago
Comment removed
VintageTopHat 2 months ago
the song says 1...2...like a duck ?xD
xxxcoolnesxxx 3 months ago
GREAT video! I've been wondering how to do this for so long! Thanks for explaining it easily and clearly! I'm going to go try it now!
M5000thesdgversion 4 months ago
Intro was funny
Plain and simple presentation yet amazingly clear and direct
Simply amazing tutorial !
cool song also
p.s mention that you're using gmod 10 in the description so that every one would stop complaining
ABLACKX 5 months ago
Nice. Also everyone asking for the song, it says at the end of the vid.
WUNDerDUDe2312 7 months ago
Thank you so much for this tut, i tried for like 3 hours trying to figure it out to no avail.
shermalerp 11 months ago
song?
qiman2 11 months ago
how did u addthose PHX3 wheels to wheels list?!!!
megamarianofull 1 year ago
The song name is MC Honky - Sonnet No.3(Like a Duck)
lolofdoom 1 year ago
thats a pretty pimp song.
pmdwashere 1 year ago
Brilliant I have Seen this but not with a tut!
sireddiedog8 1 year ago
why not using easy snap?
mickeyyeung0528 2 years ago
OMG. AWESOME
PolTehPwnage 2 years ago
Nice tutorial! Thank you!
P.S. What's the name of the song?
ivkos 2 years ago
LOL Fail tut, most embarrassing imo ever seen
nellings6 2 years ago
LOL Fail troll, most fail imo ever seen
Pyroney 2 years ago
good job man
jimcompany 2 years ago
Cool vid. I think ill try to make a rack and pinion style of this. 5/5
Jak3Mac 2 years ago
Thanks everyone for watching! Although I do appreciate the comments, can you please bear in mind that this was made pretty much as soon as GMOD 10 was released, So all the smart snapping, advanced duplication scripts weren't even written yet.
Still, I think it's good to know how to do things without scripts sometimes, eh?
jsjeges 2 years ago
Advance duplicator, please.
:D
MrOpebia 2 years ago
wat do inedd after weheels
nude72 2 years ago
how do i save it so i can upload it to internet plz respond
nude72 2 years ago
now we need to set it to button activate and add a seat, plate thingy above that to hide it, and realistic car stuff :3 and now you have your very own realistic car >:3
Facethelight 2 years ago
cuse its easy to build whit :P
ZoMainia97 2 years ago
Why does everyone use the same body for their car?
lolmaster42 2 years ago
Actually if your constraints are wobbly it means your weight balancing is off. So that means you dont know what you are doing, not that something is wrong with the game.
kamahmah 2 years ago
Wow , I figured thrusterless steering a few days ago! It looks very similar to this, but the wheels are wobbly :(
speedaddict2008 2 years ago
There is absolutely no way to fix that unless you are an uber god at this shit.
reldnahc100 2 years ago
The only way to fix is if Garry puts his fat ass to work and fixes wobbly welds,to make them strong like a freeze.
speedaddict2008 2 years ago
oh my gawd how do people firgure this stuff out
Commando61 2 years ago
seriously man, this is amazing! O_O
prestb 2 years ago
genius
really helped
Pak2man911 2 years ago
whats that song???????????????????
xcrownboyx 2 years ago
This steering system sux really hard.
If u put something on it, the car body for example, it will be nearly impossible to drive straigh it will always turn right or left...
Dwinar7 2 years ago
thats a great way to put it :D i'll use it!
StevenBergstrom 2 years ago
For SUPER EXTRA accuracy use SmartSnap!
RobotBoy655 2 years ago 6
@RobotBoy655 yey we found our new billy mays LOL!
jakeofyo 8 months ago
ty vm for this tutorial, it really helped me 5/5 but you should try the snap mod, it makes a virtual grid in every prop so you can weld with precision
tominix55 3 years ago
Hmm i better understand this now kinda
frequentgamer 3 years ago
lol i have always tried to do something like that but now that i have watched this i can finally do it nice tut
101survivalist 3 years ago
nice dude i would have never thought of that good thing you did i hate thruster steering : )
bagofbones11 3 years ago
This comment has received too many negative votes show
lol that sucked srry im gonna make a steering tut and rape this one with it.
aley564 3 years ago
when facing the props press reload (deafult is r)
Djehuty1 3 years ago
were do you get those props at 50:00?
leeoFaaneellii 3 years ago
what ? 50:00 ? xD its dont have 50 minutes :)
ryanair1313 3 years ago
00:50
leeoFaaneellii 3 years ago
It doesen't move the whole contraption.
Ever try putting one thruster in the front on one side with the correct steering controls?
alexryan69 3 years ago
yea
bikeitup14 3 years ago
This is one of the best tuts for steering I have ever seen.
Sushimitzu 3 years ago 3
nice car thanck you but is under steer a problem
9898983 3 years ago
fantastic, thanks...
SQUIZZLER24 3 years ago
very good idea
bumbaclot77782 3 years ago
nice opening
1ben1245 3 years ago
w00t, this helped a lot, thanks!
vdude44 3 years ago
1,2. 1,2,Like a duck!
angrygrunt 3 years ago
thanks m8 very helpful.....im in the proccess of adding a v6 engine(not made by me) to a car im making and need real steering...this helped a lot:P
29379 3 years ago
what garys mod are you using? can you send me a link on where to buy and or download it and do i have to extract any files?
DatMasta96 3 years ago
How do you do that the HP isn't there and the ammo and stuff?
asdertyl5 3 years ago
I made it with wire hydraulics and advanced numpad controller! It's pretty simple, but I have a big problem with stupidly weak axis! I made almost the same - two iron beams attached by axis on the other one and wheels attached by axises on them. But they cannot support themselves nor the car! I think it is the gmod 11 problem, because they just hang down and don't even hold the straight position if the car is lifted in the air :-\
VitasLoWang 3 years ago
I KNOW WHAT YOU MEAN! It is SOOOO ANOYING! Like When I mount wheels to the beams with suspension or something they like come off and droop down!
kinghybodo 3 years ago
I have some knowledge how to overcome this now - basically you need to make the beams which the wheels are connected to heavier - then the axis will be stronger.
VitasLoWang 2 years ago
Also you can axis a wheel on a flat plate so it will act also as a support against flapping. If you understand advanced ballsocket (which is not very simple:) you can attach that plate (or some flat beam) on the upper and also bottom side with angle limited ballsockets so it will allow attached wheel to steer just in a certain angle and it holds quite good then...I can show how to make it if you wish. Write me on steam.
VitasLoWang 2 years ago
can this be made via hydraulics?
VitasLoWang 3 years ago
probably but a wheel is a lot better because with hydraulics its going to have to be a lot more accurate and it is also going to delay the steering response because by the time you want it to stop turning you will have to stop it, reverse it, and then stop it perfectly straight.
kinghybodo 3 years ago
man this is really cool i have so much ideas with this :D
karolyzaz 3 years ago
try smartsnap it better than looking at markings
swampie44 3 years ago
I would have, but if you cared to notice, this video was made 2 years ago, when that script wasn't even written yet.
jsjeges 3 years ago
lol THANK GOD FOR SMARTSNAP!!!!
kinghybodo 3 years ago
that is beastly. I never thought of that.
texanmanjr 3 years ago
Thanks for sharing dude
ChaosHalo 3 years ago
this is really helpful but could you make show how to make a small one? thx
AvidGamer8 3 years ago
This is excellent! i love it.
Many thanx for making this :D
gonna try it out, it kicks ass!
AvisenDK 3 years ago
nice video, it looks like fun
cryosharp 3 years ago
hmm wonder how hard it would be to do this + suspension
TySpoonz 4 years ago
its been done but the steering is a bit different i think
Shadowdude3356 3 years ago
*ment to reply tyspoonz question thing..*
Shadowdude3356 3 years ago
Um if you still don't know ill PM you on how to do it. It involves a bit of improvising though.
kinghybodo 3 years ago
Intro = best ever :D
Yesterheaven 4 years ago
how do u make it go left and right thou?
metalmario117 4 years ago
with the control for the wheel
ariskk88 3 years ago
Awesome. And a great tutorial.
Handsoffmypork 4 years ago
not bad, you should add some suspension to it, and a shell, and ull b a king :D
avaricewithin 4 years ago
If you just put a body then you get a realy nice car.
pheonxas 4 years ago
GENIUS u r god!!! 5/5!!
superune369 4 years ago
This is one stylish tutorial.
cctoide 4 years ago 2
lol song, 1,2 like a duck lol!
nice tutorial though
nizzle2 4 years ago
Wow awesome!
Gunskihalo 4 years ago
that is awsome man!
konohanaruto2 4 years ago
great vid, 6/5
Zach2581 4 years ago
no colide
HARDCOREGM 4 years ago
thats cool, because i want to use as little thrusters as i can, because in most cases thrusters are the easy way out
schfiftyfivehundydoo 4 years ago
that is genius! (well to me anyways)
5 stars!
KevinYOKI 4 years ago
can someone say me how to change the wheel turning direction.. when i put the wheels on they are spinning in the wrong direction and i cant drive the car i made.. but the vid is awesome man !!
scooterfreak050 4 years ago
to turn the direction you walk up to the wheel and press your use key
tahazzar 4 years ago
what are the specs for the elastic (damping etc...)
BFCage 4 years ago
the begginings nice
22ChaosBullet22 4 years ago
how do you make your tools different items?
like u made your wheel thing a suitcase
22ChaosBullet22 4 years ago
he just used the gman moddel...
jake67675 4 years ago
lol i didnt know how to do that....
ROguitarCK 4 years ago
basic
cstats78 4 years ago
Pretty Nice But dont Every one know how to do that?
Frekiz 4 years ago
bro, this is AWESOME.. i hated thrusters.. so this is like god to me.. <3 +fav and 5/5 :)
arthuro13 4 years ago
Kudos to you my friend, very clever =D. by the way, if anyone can tell me how to make a Fraps video compatible with Youtube, i'd greatly appreciate it =D, i have a walker to show off =p
PoopieSloth 4 years ago
Wow clever. lots of detail in movie. i tried to make a thrusterless-steering car and it was horrible. i never though of the steering weel and stuff
Quin1010 4 years ago
yeah thats ONE way to do it lol
i know bout 5 others. oh yeah, and i don't have a life
facenayl 4 years ago
Wow that was clever! I'm a complete noob at this game so that helped a lot!
crinnycow 4 years ago
Good tutorial mate!
VortexNL 4 years ago
THANKS FOR THE TUTORIAL!
Surka89 4 years ago
me and a friend tried this, we ahve a problem however. As easy as u make it seem for some reason when we add the tires to the steering arms it go hay wire , the tires lay flat and occasionaly get tangled up in the ropes...why is this?
pissy 4 years ago
The only reason I can think of is because your tires are really large, and therefore too heavy for the chassis to handle. Using the weight Stool, try making the wheels about as heavy as the arms they are attached to.
jsjeges 4 years ago
Yeah, my tires go haywire too when I do this. How can fix this?
thedragonforce 4 years ago
Hilarious intro XD
bendystr4w 4 years ago
Hey, I tried to do your car but I make some improvments, click on my nick (PENR) then click on "GMod Thrustless Steering Tutorial by SierraKhaar"
PENR 4 years ago
Why not use thrusters insted of that big wheel?
Oh, and I suggest you start using SmartSnap.
PENR 4 years ago
are you stupid? he explains why he does nto use thrusters.
steve88520 4 years ago
BEST FUCKING TUTORIAL EVER MADE!
reff335 4 years ago
YEAP
agir68 4 years ago
thx for the tutorial. very helpful
thejesuspoet 4 years ago
What song is this?
166291 4 years ago
genius! *goes out and builds a real car and dies 3 mins later after loosing control of the car and crashing into a rail and swirving off the cliff*
Shingshanggmod 4 years ago
I think a way to make a floating vehicle steer like that is to make a same basic chassis but instead of putting wheels on the turning mehcinisim, you put thrusters at the ends.
Afroded 4 years ago
what did you use to record?
adni0917 4 years ago
This is so cool! Finaly a good way to steer! I love you!
SegsiLEgsi 4 years ago
really good tutorial man, i never knew that
Jspaced 4 years ago
Nice Tutorial! :D
TaZisme123 4 years ago
Very nice tut, though I already knew this. If I didn't I would after watching this!
turbis 4 years ago
best vid on youtube 5/5 =D
sykojme 4 years ago
wow... 5/5
loooony92 4 years ago
cool 5stars man if i could i would give you 3565161316 stars!!!!!!
Ginteru 4 years ago
awesome! great tutorial =]
kyr4n 4 years ago
nice car and idea and thx to smart-snap doing this is a lot easier 5/5
HIGHPINOY 4 years ago
Cool shit man! 5/5 Thx its Awesome! :)
explofreak 4 years ago
I bet theres a way to incoprorate that into a plane design but im too stupid to think of how :)
Krazog 4 years ago
BTW, sorry, I marked as spam. I accidentally clicked on Spam instead of reply -- twice. Anyways, you're probably thinking about rudders on a plane, but that wouldn't work because the source enginge doesn't have wind. :(
jengerer 4 years ago
thats totally awesome! whats the song?
aguythatusesthissite 4 years ago
good job very nice
BaillyR 4 years ago
please post a link to your save file.
i tried to make this, took 2 hours.
but mine sucks soo much.
plz post yours :)
dbzsr 4 years ago
awesome.
I can't try it right now cuz this computer is to slow to run gmod, but i will l8r
demoniclyevl 5 years ago
can you download Gmod somewhere?
Mystickpk3r 5 years ago
You might be able to download an older version. The newer version, you have to buy on Steam. It's well worth the $10.
maassenn 5 years ago
i already got itXD gmod10 well tysm
Mystickpk3r 5 years ago
Awesome!
Saharaplace 5 years ago
i am downloading pheonix pack final, right now..i hope this works =)
collinownsyou 5 years ago
Awesome, am trying this now.
andy1976uk 5 years ago
Well it works for me. Your just screwing it up. This is very useful, if the forums on facepunch were up I would give you 10 gold stars.
Patrickletch 5 years ago
it dont work:( it turns but meses up
umpalumpa101909 5 years ago
brill
hoopy7celtic 5 years ago
nice real nice ill try this right now :)
umpalumpa101909 5 years ago
Thanks for the tip (about getting PhoeniX's pack)
A30GAF 5 years ago