Flattest Can Crusher on the Internet!

[uhfnutbar1]

good way to lose some fingers nice

[MrGareth66]

this video was awesome until... i took an arrow to the knee!

[darkorbitfanatic]

Amazing how much force it takes to crush a simple can is 't it?

[l33trikimaru]

you ever trod on a can ? yea much quicker.

[klg1956]

is your hearing affected by this? lol

[vk4akp]

How do I make one? .-.-.

[1904moore]

wow...1 moving part.

[22mohamido]

looooooooooool that was very funny ,, no problem to have some fun from time to time :))

[Jeff12798]

Cool, now put your hand under it.

[chrismenz100]

i cv 9 et of 10

[FlashXX97]

Chuck Norris can do that with his dick, no, not even 1 strand of hair, his very existence itself crushes cans.

[senseblogger]

i can crush 20 to 30 cans flat in 10 secs using my own home made device a large plastic bin with a board a pole and flat piece attched at bottom using levergae handle ! Place the board over top of the bin lift up the pole press it down shabang 20 cans flattened in 10 secs ! faster than using my van to crush 100 lbs saqves gas and time good old huamn energy ! today was home game for NFL team went down after 1st qtr and like wow dem tail gaters are crazy 565 lbs in 7 hrs $339 !

[NickXDDX]

instead of saying 200 thousandths of an inch, why not 1/5 of an inch?

[AwsomeSauseForMe]

...it's a weight in a chute...congrats.

[baallzdeep]

LOL, if you want I can upload a video of putting a can on the 250ton press we got at the shop...Now that will be a crushed can.. Dont put videos if its not real..I bet I can flatten the can so flat with the press that u could use it as a razor blade..

Now enough of those fake vids

[UpcomingJedi]

What a Rube Goldberg machine! Any college student can do that on their head.

[megalazor8224]

i can do better with my foot...

[XxLeurxX]

Why don't people understand frame by blurry frame is not slow motion. Though, that crusher is pretty cool. You should have air pressure build up and blast it like a cannon though :3

[rasmuslymo]

make airvents to allow airpressure to escape and you can do it ikn one blow

[proxskillz2]

@rasmuslymo it doesnt sound like he's using air, looks like solid weight power to me

[rasmuslymo]

@proxskillz2

Year i know it is kinetic, But the air trapped inside the can must have vents to escape fast, that is why he cant do it in one blow.

[proxskillz2]

@rasmuslymo ahh, i get what you mean now, i though you were talking about the device itself

[clok555]

i saw 3 frames of slomo lol

[horneyomen]

i can do better than that with boots on.....

[NatureGuyProductions]

red rocket red rocket!!!!

[frisc45]

no mechanical advantage? and you use so much energy just to elevate the crushing mass. lame

[lastingpain22]

Slow motion? LOL. You just showed 7 frames in a slideshow.

[josephoo7]

remember, that potential energy is mass x gravity x height...so if you pull it up higher or make it heavier, more potential energy, and therefore, more kinetic energy, and therefore, more smash.

[cordellthecreeper]

do you like diet mountain dew? 

[hheywire]

it just crushes a can faster its not the fastest on internet. other crushers have a can rail to keep loading a new can in at a time, yours is by hand. still cool as shit though.

[rsv1336]

that was money well spent

[TheAnatomias2]

btw, putting shit in slow motion doesnt make it gold...

[nickbombe]

You try to crush a can full of nitroglycerine with this!

[josh11915]

try it again with a 400 tun hydrulic press.. that will do the job

[paulj071159]

@scriptsrfun I have built several, Hydraulic and Pneumatic. ya horse pussy. 

[spaz102]

So much for "slow motion" It was more like a before-after comparison :s

[SpikeZeek]

now smash 21 cans together

[Chickenandchili2]

look at our vid we crushed a can with an i-beam flatter than that lol

[Ditrix88]

Don't crush your hand...

[Mastermind8908]

...more like 1500

[Mastermind8908]

Does this help with can redemption? Instead of turning in a bag with say 70 uncrushed cans you'd have 500; which would make it heavier, correct? It would take a bit longer unless you scavenge the neighborhood.

[fall22123]

I wonder how many of you that post your can crusher videos have gotten your fingers in them. Ouch.

[SuperSharpboy]

Crushing a full can is a good way to have fun :D

[paul8246]

you should weld it higher to give much weight force to crush the can in one go

[DrScandalous]

I was kinda hoping that shitty thing would crush your hand... to teach you that you can use something you've always got with you...... Your foot

[HUER0L0K0]

Soda is full of poison and is gross. Quit drinking that crap.

[kibilibob]

type in hydraulic crusher and go to the one with the green crusher and it beats this by far

[MrMikeTEMP]

The perfect friend of a homless

[bbpfab]

My air powered crusher smokes that dude... :)

[MyJeckylDoesntHyde]

Sorry, mine crushes flatter with a single drop. A second drop makes it about as flat physically possible.

[lerenceo]

Boooooo

[jamespk3run]

I blow mine up. BOOM <3

[3243588]

booo u suck

[StopMotionMind]

a 4.8 inch can can have more than 21 cans if it really was 1/5 inches thick.

You could have 24.

Anyway, your design is loud, inefficient, and just plain sucks sorry.

[skaterboy17901]

now put ur hand in there :D

[theblackmanOyeah]

in soviet russia, can smash you!!

[bigdirtysangel]

this is so dumb

[Tetw2012]

I've got a flatter can crusher

[lekkimsm2500]

.... Wow, pointless ...

[Cleahpatak]

Only 25lbs?! I'd use at least 50;) maybe that will crush them the first time. Manual crushers look more satisfying too. Overall: nice crusher!

[StopMotionMind]

What's the point of welding? Duct tape would've worked fine for what he did.

I built (and welded) a hydraulic press that puts approx 45,000 psi on a can.

[dirtshower250]

the can crusher on my wall is faster and my 80 year old grandma does it.

[zaiux]

Im gonna pretend i've never seen this video

[MinerOverMatter]

There's one of these made out of wood that crushes in one drop. Look up "old school can crusher"

[625fireman]

Putting the can in the other way, will work better, IE hole down.

[macro312]

Am i meant to be impressed? i can do it with my foot then get an elephant to stomp it....

[lazynin5]

My foot can do that too

[thesquirrel821]

weight has shitty tolerances to the outer tube, takes two strikes, doesn't crush that flat and Michael Fox could weld better than that

[MrCoryjohnson1]

double or tripple the drop height of your ram and put somthing to keep the can in place and you'd be set

[MrLeonard55]

That welding is embaressing.

[Serostern]

@MrLeonard55 Good penetration and gets the job done. What more can you ask for?

[hootergirlsrhot]

i get better slow motion on vista

[Andy1644]

Isn't that just a big bit of metal in a tube that you drop on a can?

[zYreC007]

bad slow-mo :p

[arkansastrash320]

Dang dude i would love to have a big 33 gallon bag of those after all flattened.If its 21 to 1 then it mite be like 5 big bags into one.Just a guess i know you sure could condense a big load.Nice job.

[Y2kratk2Y]

put your dick in there

[bigsuma]

Not even close to the Flattest .. even after two passes your can isnt as flat as the single pass another i saw.. plus yours is loud as hell ..

[xGothimox]

Put a full can under there.

[MrNachtlich]

my foot works better.

[schoolsucks2weebly]

search hydrolic can crusher

[GaseousAnomaly001]

I bet my 300 ton hydraulic press downstairs could crush a can flatter.

[pencid]

@GaseousAnomaly001 win..

[malagarcha]

stupid retarded.

[glennwhite]

FAIL !

[punkskater9090]

hahahaha sooo easy, all it is,is a heavy metal tube like thing that he keeps droping so easy....1 star

[360lolz]

i don't even know why i watched this

[inytay1]

if this for a project or trying to make more room in the recycling box but did you know recycling companys do not recycle crushed cans or at leased wear i live because it informs us on there website, but nice job on the machine

[Danny19921125]

Look like pile driver, but this is alu-can driver, lol!

[Archon762]

what happens when u put that stack of 21 cans in the crusher? do they get even flatter?

[proskillz89]

my foot crushes cans faster...

[ucerealb]

Lol I just step on them... (Squeeze the sides first)

[plasmaman2507]

Again with one can at a time....

[JasonECI]

Obviously the can flattenner works pretty well, not sure if the electronics has been finished though.

Just curious, I assume this setup is for home use? So... how much will it cost, and what's the point spending that much money on trashing a specific trash that flat?

[eutectics]

i can hear the cans laughing at you....

[MeierTV]

my dick works better

[BuddyBoy224]

try squeezing the can a little in the middle with your fingers so to reduce the stuctual integrity of the can...that will give you a better result

[EasternCalifornia]

not as big as my foot

[Damaku250]

lol piledriver

[bioster42]

crap

[dilbertfungoing]

2 hundred thousandths of an inch?? lol, I guess that more impressive than saying 2/10ths

[paulj071159]

Pretty damn lame. having to drop a weight twice to crush a can. The welding is pretty shitty as well..

[dimenhigh]

@paulj071159 Welding is nice - good job on that actually . if u dont mind the work , n I dnt , its pretty cool actually . 

[hijazzer10]

@paulj071159 Its still pretty good that your able to crush the can

[UnitSe7en]

@paulj071159 Yeah seriously. Thanks for wasting my internets, davis. You ass.

[K1dKrusade]

put your nutsack under it and i'll be impressed

[ACLJavi]

ive seen better on one strike. this does not impress me at all.

[chernyavsky]

Great thing to tell the world about, lol.

[EmoDog666]

hate to stick my foot under that.

[strongbow5ml]

1 stamp is ok, having to smash a little weak can 2 or 3 times is pretty shite

[davidl343]

a hammer can do better than that

[jabbels]

no dude its ok its diet hahah =]

[Psyck2006]

Omg how can u crush the most greatest soft drink in the world?! (mountain Dew) Go crush Fantas :D

[matthias18645]

put your hand in

[peepeevagi]

I can one up that.

My truck, lol.

[PopeOfEngland]

What's up with the diet mountain Dew cans?

[yokidoki99]

mine crushes way flatter and ur slow motion kinda sucks no offense

[PopeOfEngland]

You have a lot of work to do to get this can crusher to crush more than 25 empty cans. Twenty-five cans is the total number of cans crushed that equals the height of one empty can.

Your Pope

[radudman]

no its not. i made a hydraulic press can crusher that used a car jack to move a piece of aircraft grade aluminum up and crush cans. total crushing force of 6000 pounds.

[MMOExplorer]

You gotta be shitting me...

1) That thing is so flimsy, I mean look at how that fire extinguisher moves when it falls

2) It sounds cheap when you pull it back up.

3) That slow motion is not even good, get a high-FPS camera and do real slow motion not this Windows Movie Maker Slow Motion Crap.

4) Two hundreds of an inch is 0.5 millimeters, meaning 20 cans would make a center, you are so far off.

[PopeOfEngland]

MMOExplorer:

I agree with you. Do you also notice that this can crusher could only crush empty diet Mountain Dew cans? Terrible!!!

[Saferetias]

how does the ram come down?

[rollhard86]

funniest comments ive ever seen! rofl!

[kydoes]

Can do better with a hammer or my foot.

[12cu294xxx]

put ur dick in there

[tackorgybe]

lousy piece of shit. Get a life man!

[lordratner]

Worst. Video. Ever

[risenskater]

dont get your hand under there and drop it on accident lol

[walikai]

crappiest slow motion ever, and wouldnt 200/1000 of an inch be 1/5''?

[mobilegamer999]

agreed

[GradyRho92]

@walikai hes trying to make it seam smaller when its really not

[Serostern]

@walikai I think he means 1/200 000

[reditus2]

@walikai that's right but it makes it sound sooo much thinner lol

[Durkadurka1995]

@walikai That is true, but I think 200/1000's of an inch sound better 1/5 of an inch

[thundergod989]

@walikai It crushes them to less than 200 BILLION TRILLIONTHS of an inch!!

[walikai]

@thundergod989 if it were 200 billion-trillion/1000 billion-trillionths it would still be 1/5" ;D hehe

[thundergod989]

@walikai Congratulations, you got the joke.

[TheEsseboy]

@walikai 200 000/1 inch...

[hoarp001]

If those cans were crushed to a thousanth of an inch, dont you think your stack of 21 cans would be a little bit thinner than that....?

[walkingfreak]

i could use my 25 pound iron weight to make one really flat in seconds

[kel1981]

Might as well run over them in your car than fuck about with bag of shite!

[Vertual6662]

im pretty sure i could crush cans with my feet faster than that.

[rodstartube]

i would just use my feet to do that, faster, cheaper, and funny, and i do a bit of sports

[LordWabbit]

there is no sound of a motor - must be a really quite one or else the dude is pulling up the fire extinguisher himself. this is pointless actually, no way for an automatic feeder, may as well jump on the cans, get some excercise.

[poeleloele]

Wow, someone is really deaf or what??

[drowsy123]

i wanna see the top, to see what actually happens with the machine

[lolitsadog]

lets see you crush a can... FILLED WITH WATER

[cannon8800]

lol that red thing looks very much like a fire extinguisher. :)

[BigMaoriBoyz]

That's what I thought too... I'm sure it is

[123kkambiz]

in you description it is not known what you want to say, 200,000 or 200/1000 of an inch, if you want to say the second numeric above , you can just say one fifth of an inch, or two hundred thousanth of an inch if i am right. what you say in ur describition of the right it means its thickness has increased to 200,000 inch,

the correct word is just 1/5 or one fifth of an inch.

[requiemfad]

Hey, can you show how you are pulling the weight back up?

[lynel1985]

my only concern with this video is that it shows that you drink Moutain Dew hahaha...ill take a crab juice

other then that, impressive

[butkatrello]

Those are really flat cans. The flattest of the flattest..

[radumotisan]

someone's got a hobby :)

funny video

[sandysandy9911]

i could crush it faster andf flatter with my foot

:D

[mattyelle1]

Wow, you can drop a fire extinguisher down a tube...impressive machine.

[DidntKnowWhatToPut1]

not that impressive

[annie3332587]

LOL, My foot can do a better job.

[Shane1163]

my van could do a better job..

[alopz89]

my truck can do a better job...xD

[nixari]

my sledgehammer could do a better job..

[MMOExplorer]

An Airbus A380 would do an even better job... but unfortunately I cant get my hands on one of them :D

[MonkeyDog500]

your mom daaaaaaaaaaammnnnnnnnn jk

[howard95]

wad happens if u put ur hand there

[tTatmosT]

the crusher breaks :]

[kayyouman]

do it to an unopened can :)

[arkansastrash320]

I like the design and yes it flattens them good..

[killman369547]

points for creativity

[killman369547]

richous u should crush them untill there paper thin

[killman369547]

how heavy is the weight

[Saanax3]

At least in Finland, you get paid for cans and bottles :7 for 0.33cl you get 15 cents which is 0.237 dollars :O And 1.5liter bottles you get 0.63396 U.S. dollars

[PopeOfEngland]

Saanax3:

Since you guys are paid so much money for bottles and cans, we could send all our garbage to Finland for you to make a buck and "finish" it.

[Saanax3]

>:l

[260830107]

it rather unhealthy to put your balls there and flatten it