The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!
The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.
Nice video! Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.
Free energy technology exists!But some very powerfull ppl don't want you and me to be free from energy costs,Find the real deal, a free energy device at LT-MAGNET-MOTORdotCOM ,The revolution begins!
nice motor Lidmotor . actually the two pots in series is an idea i had to reduce the current draw on my Bedini self runner last year but if every benefits from it then GREAT !. Nice Vid .
Yeah i suggested to use the furniture movers that usually go under legs or feet of furniter to slide on capets. Thatshould do wonders for you. Or you could use a teflon spray then let it dry as was suggested on the forums.
rroge5--- The camera makes the magnet almost lool like it is made out of rubber the way it wobbles around. That is a weird visual effect. The thing is no where near 100% efficient. If I was going that direction then I would work on the energy loss at the bearing surface and also get everything super cold. Maybe box it and stick it in the freezer.
X00000013-- I have tried all kinds of "dance floor" surfaces. Noise is an issue at my house and the hard surfaces are noisy. I'm thinking teflon maybe.
This has been flagged as spam show
The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!
333kgb 10 months ago
The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.
333kgb 10 months ago
This has been flagged as spam show
Nice video! Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.
333kgb 10 months ago
This has been flagged as spam show
Free energy technology exists!But some very powerfull ppl don't want you and me to be free from energy costs,Find the real deal, a free energy device at LT-MAGNET-MOTORdotCOM ,The revolution begins!
porscheghcje 1 year ago
This has been flagged as spam show
Free Energy is real and its here! The Oil companies are doing everything in their power to stop these
information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the
revolution!
urgencyharviefcem 1 year ago
nice motor Lidmotor . actually the two pots in series is an idea i had to reduce the current draw on my Bedini self runner last year but if every benefits from it then GREAT !. Nice Vid .
4CHRISTONLY1 2 years ago
Yeah i suggested to use the furniture movers that usually go under legs or feet of furniter to slide on capets. Thatshould do wonders for you. Or you could use a teflon spray then let it dry as was suggested on the forums.
jbignes5 2 years ago
Cool!!
Hey Lid, what would happen if you put two snake egg magnets??
Thanks!!
afdhalatifftan92 2 years ago
afdhalatifftan92---- It doesn't work. Only room for one on the dance floor.
Lidmotor 2 years ago
.... you might end up with three????
comwarrior69 2 years ago
rroge5--- The camera makes the magnet almost lool like it is made out of rubber the way it wobbles around. That is a weird visual effect. The thing is no where near 100% efficient. If I was going that direction then I would work on the energy loss at the bearing surface and also get everything super cold. Maybe box it and stick it in the freezer.
Lidmotor 2 years ago
Please try placing that coil over the magnet......pleeease?
thanks
harpbloke 2 years ago
Very nice work!
Flux4Energizer 2 years ago
has anyone seen or built the SEBCAR modification of a Bedini SG on peswiki?
Super Efficient Battery Charger and Re-energizer.
kalnaiwb 2 years ago
kalnaiwb----I have not heard of the SEBCAR modification. I will look it up
Lidmotor 2 years ago
Try swapping the plastic lid for a glass lid, say from a candle, way less friction!!, cool build, thanx for shar>N
X00000013 2 years ago
X00000013-- I have tried all kinds of "dance floor" surfaces. Noise is an issue at my house and the hard surfaces are noisy. I'm thinking teflon maybe.
Lidmotor 2 years ago
that has such a awesome visual effect when u were in close on the magnet.
is this circuit more than 100% efficient?,
rroge5 2 years ago