01161996bubba cummins is not a dodge product they buy there motors off cummins you can buy a tractor, semi, a school bus with a cummins it has nothin to do with dodge.
I'm in the middle of the exact same swap! I have an 82 crew cab 4x4 dually and i have a 12 valve out of a 90 dodge truck. I'm running a 518 trans and noticed you were running an automatic, how did you hook up your shift linkage since the dodge linkage is front to back and the chevy is up and down?
Do you have a significant vibration problem. Some forums have indicated that there are significant vibration issue with the 4bt vs the 6bt . Does this seem to be an issue?
that shits pretty boss yo. wtf!!! 12V!?everybody run, theyre here to repossess the house!!! :O lol. i gotta 74 ford 460 V8 dually, swapin the axels and suspension out, droppin it for street look.
nice job how much clearance is between the axle and the oil pan? I would like to do a 2 wheel drive swap, and leave the truck at the stock ride height do you think it would clear?
cummins better not sign with gm i like the v8 diesel. up in northern maine we have had bad luck with cummins motors to be honest. cat and the mack v8 motors have proven to be the better ones.
no really we have had bad luck with them. we've had only 1 good one in a crane, but the worst part about them is that they dont just want to start in the winter.
kinda like havin a 292 in the ol tonner, but NOT my stock 12v cummins would eat any 292 I ever drove . NICE GM truck with a 150 pound crankshaft! and no offense to v8 diesel lovers, because they do work pretty well for having such teeny bottom end parts like my 440 cuda, but like all the big boy trucks (Powered with N14, ISX, C13, C15, series 60) and so forth),, the ISB has 7 main bearings instead of 5, larger rods, I mean way bigger rods, each hogging up the whole space between mains...
No not really (at least w/o 20 grand into em after being stock). They make the most torque though because they are essentially "geared for the road" tractors with the inline 6 configuration. If your gonna sled pull and dont mind going slow and being excessively LOUD and irritating....get a cummins! If you wanna go fast and be practical while still being able to pull anything practical in daily life...get a duramax or powerstroke! Im unbiased...i love em all, but theres definately pros and cons.
powerchoke-are you kidding???? look at the stock numbers-cummins have more power, last longer & are more durable- I had a ford diesel & even with a banks sidewinder kit it was still a turd. my other cummins has stock exhaust & is as quiet as my other gas truck, & gets over twice the mpg
dodge doesn't build diesels... the ones in the Jeep grand cherokee are from Mercedes Benz, and the dodge ram diesel is Cummins. Cummins makes some really good engines.
The brand fricken new '10 Ford Powerstroke is NOT made by international.
Good detail on a tricky retrofit. The Cummins 6BT5.9-160 is a shoehorn fit for an engine bay intended for the Detroit V8-6.5 and Chevrolet V8-454. Incidentally, Cummins has block plates compatible with the Spicer ESO66-7B and Delco direct-drive starter for several B-block applications.
Nice clean work man, I Love the look of those old Chevs. I have thought about taking the Body off my 89 Burban and dropping it on my 2500 Dodge 4x4 frame. I figure it will be easier then the other way around LOL!
lol i know MLPSTORM is a douche bag! hes always commenting on chevy videos and what not saying dodge is better and so on.. Got into it with him plenty of times. Cummins in a chevy is the best thing going
i love how he searches for chevy videos and talks shit about chevy and goes "oh the hemi is so awesome it would own a 350" and so on one dude got so frustrated because MLPSTORM said a 2X4 dodge has a straight axle up front so he made a video that showed it had IFS on a 2X4 lol what a tard
Dude i know exactly what ur saying hes a douche bag and constantly is commenting dumb shit on chevy videos about hemis and dodges and so on... The only thing dodge has going for it as far as im concerned is the cummins diesel. Which dodge doesnt make.
and mlpstorm is a tard he probably doesnt know what IFS or SFA even is. lol
100% agree the only thing dodge has is cummins which they can't make on their own
that power usually doesnt even make it to the ground because of their shitty trannys... not only that but somtimes they will randomly go in reverse which has killed like 13 people and they still use the same tranny and dont even get me started on chryslers 2.7....
Bottom line: great engine shitty everything elce that chrysler makes lol
Yeah dodge is pretty much worthless, ive never liked dodge. I'm a chevy guy but would take a ford over a dodge any day. I was reading a comment somebody left on a video earlier..
There like your buying the cummins engine, you get the dodge for free. lol.
There trannys arent worth a shit, they rust to shit, just garbage. I wish chevy had cummins!! that would be the shit
Chevy deserves Cummins way more than dodge if they had it then all they need is to make a SFA on the HD's instead of IFS then it would be PERFECT Their IFS isnt as bad as people say though mine takes quite a bit of abuse, its just when your pulling in 4X4(which is very rare)that you might have a problem but if your doing sled pulls you have to be ready to spend money.I think of dodge through one of ron whites jokes if you put $1000 on a peice of shit it looks perty nice. Cummins=$1000 dodge=shit
Glad you agree with me, and yeah that would be sweet if chevy had sfa in the front, i mean IFS is okay... Chevys ride way better than a ford or dodge in my opinion. Only problems ive had with IFS is when your snowplowing with trucks with over 200k on them the cv shafts tend to snap, or the boot rips and the grease wears out and they click, then there done. (my work has quite a few 90s chevys with about 200k +. Someone said dodge owes cummins a lot of money and arent going to be able to use
their engine anymore. I'm not sure if thats true but its just something i read on here and forgot to talk to the guy about it. The duramax is a good engine, and people say their japanese etc... They are actually not GM builds them, they were a joint design and now there GM. But cummins would be better in a chevy.
On a quiet day you can hear a dodge rusting! :) lol
Ya as of 2006 GM builds the duramax in Ohio they are perty good engines i rode in one and it has plenty of power and that allison shifts O so smooth even when the pedal is to the metal. It would make my day if dodge couldnt afford Cummins any more so they signed a contract with GM. I would just use a 80's chevy to plow snow you can get them perty cheap and are great workhorses. dodge: Drive Over Dealer Get Even Ford: Fucked Over Rebuilt Dodge i love these jokes
Yeah i believe in masillan ohio or something like that... I'm from ohio like cleveland area, theres a GM plant by my house also a ford plant. But yeah i have rode in some dmax's and they got some balls, and ya cant beat an allison trans. Me and my father hauled a 16,000lb ford f600 on a tri axle trailor with a dmax chevy dumptruck, no problem. Takin them fords where they belong, THE SCRAP YARD lol. And i love all the ford n dodge jokes. I agree i used to have an 87 chevy lifted 9" with 35s, it
@bigbadbronco86 ford Fucked On Race Day, Fucker Only Rolls Downhill, Fucked Over Rebuilt Dodge by the way chevys have great resale value. Mustangs have the worst resale value its pathedic.
@sayer308 really if you think thats true then you dont know much about cars, lets look at how much a 79-93 5.0 gets vs a 82-92 camaro lmao chevys can be had where i live for dirt cheap
@bigbadbronco86 well where the hell do you live because around here its completely backwards you must be lookin at some rustbucket camaros and restored stangs by the way i just got a 02 silverado 4.8 with 67000 miles, 4x4 regular cab short box and ran me about 13k... crappy resale my ass
@bigbadbronco86 no its called its a nice truck with a outstanding maitence record from one owner, i couldn't find one thing wronge with it no scratches or anything, the dealer didnt even have to clean the truck it was in that good of shape, you could of ate off the engine, plus the previous owner put some rally rims on it with 32" tires
@bigbadbronco86 you were just talking about how good of resale value ford has and how bad chevy has?!?! are you fuckin high? so are you saying ford has worse resale value than chevy? like i just said... (it helps if you pull your head out of your ass)
@sayer308 pull your head out of your own ass first, regardless of the miles you paid 5 digits for a 4.8 equipped truck lmao you can get 05'-06' chevys with 5.7's for 10k unless someone is trying to pay it off and still owes more then its worth. read what you just wrote, and maybe next time you can form a coherent sentence, im not gonna sit around and argue what i know is true with a dip shit like you, for god sakes you paid 13k for an 02 hahahahahah moron
@bigbadbronco86 ok one who gives a flying f if it has a 4.8 theres like 10 less hp and 30 less tourque, second your calling me stupid they stopped using the 5.7 in like 98, third who gives a shit about grammar its youtube, this truck could pass off as if we were in the year 2004 again, you would understand if you took a look at it and finally you must have no life because you can respond within an hour or two... your pathedic
@sayer308 o so now they dont use 5.7 350s the most widely used chevy motor ever produced, ok man. even still you could have gottan a 5.3. even if i was pathetic, atleast i can spell the words i use hahaha youre more then welcome to continue making yourself look rediculous it doesnt bother me a bit
@bigbadbronco86 why do you care if it isnt a 5.3 it gets me around just fine and still has plenty of power, i love how when people run out of comebacks this turns into fuckin grammar school, why do i care what youtube people think about me, i have real friends you know, probably unlike u by the way please show me a DECENT 05-06 silverado for 10k
@sayer308 it doesnt matter to me one way or the other youre the lifelss asshole that paid 13k for what might as well be a 6 cylinder lol and its not about comebacks its about you being a 4th grade drop out hahaha
@bigbadbronco86 i paid 13k because THATS WHAT ITS WORTH you jackass, if i could go back i would do the same thing, its the same damn block as a 5.3 only with a shorter stroke and it has a lot more power than a V6 and im pulling straight A's so shove that up your ass oh and your telling me i dont have a life when you check your damn youtube every hour you really are that pathedic i can spell correctly when i want but i got better things to do than make perfect sentences
@bigbadbronco86 oh i wish i could be cool like you and spend my life on youtube and try to talk shit, you make no fuckin sence you say that chevys have crappy resale then i tell u i baught one for 13k after tax and your saying i got ripped off, if i got ripped off then so did alot of other people, you really have no idea how hard it is to find a truck like this in great condition with only 67k miles just give up and admit your wronge
@sayer308 ok man then you go ahead and tell me why then at the food lion auto fair did i see a sharp wine red 2002 gmc extended cab w/ 120k mi with an asking price of $2500? and tell me why my neighbor bought an 01 4x4 with 150k for $4500? tell me why the dealership my shop fixes cars for sells them all day for between $3500-$6500? tell me one last thing, why did my other friend scoop up an 02 gmc regular cab for 3500? please answer me all those and i will say idk what im talking about
@bigbadbronco86 ok type in 2002 silverado on Lincoln nebraska craigslist, i found one that looked decent but had 322k, either all of thoes were piles of shit or your lieing
@bigbadbronco86 Your so full of it. The only way that could be true is if all of thoes have a salvaged title and drive like shit. I know what they're worth and theres no way in hell that your gonna get a even half way decent truck with 122k for $2500. That one truck with 322k had a asking price of 5500. Theres one just like mine with different paint and 100k miles asking 11k. Im not stupid I looked around for about 3 months trying to find a nice one and I know I got a good deal.
@sayer308 lol yeah ok im full of shit, but with all the talking youre doing it sounds more like youre trying to convince yourself that you got a good deal instead of me hahaha loser
@1985k20silverado yeah thats great, but youre just like all the other morons on here you start running your mouth to me and i make you feel stupid but yet i need the life, look back and read man youre the one who ran your mouth first, so maybe its you that needs to look into getting a life hahahahaha
@Dustin91 acutually they still are a joint venture gm owns 60% and isuzu owns 40%that heads crank and rods come from japan dont believe me pick up december 2010 diesel power and they toured the dmax plant in moraine ohio gave away all the dirty secrects about the dirty trash diesel
any Cummins needs a NV4500HD or a NV5600 or an Allison..... i have a 91 dodge cummins and the transmission is bullshit... im trying to find an NV4500 for mine, id go for a 5600 but....i dontt need double bull, thats just nuts, its gonna be a street rod truck, not a bulldozer.
had over 200k on it, me and my father built it when i was like 14. But man that would be great if dodge couldnt afford to use cummins anymore and they signed with chevy.
A chevy truck, allison tranny, and a cummins turbo diesel. = 1 hell of a truck. The 6.0L vortec is a pretty beastly engine tho.
the 518 was in the Jeep cherokee this is a 618 same parts just on a larger scale. these trannys will really perform when cranked up with a billet converter. I own my own trans shop.
So your telling me that you did all that hard work and dont get me wrong it looks awesome. But you put in a non inner cooled rotary pumped 12 valve in. I mean come on. I would of at least put in a p pumped engine to where you could of got some power out of it.
Very very cool! 5 stars! I'm dying to do just that with my free time , that never seems to come around, hahalol. You gotta post with the truck running and audio. The older chevys are hard to beat for a classic look. I love dodge but the first nice looking truck they made was 02-03. Go for it. lotsa luck to you all.
tltcrawlr: am running a 727 dodge three speed tranny with 4:10 gears. added a couple of extra cross members and 2" more spring lift in front end. other than that just lots of time.
1:04 that KW looks badass!
yz250raceer 4 weeks ago
awesome swap, but if your doin all that work anyways, why not install an intercooler too?
jmanwild 1 month ago
01161996bubba cummins is not a dodge product they buy there motors off cummins you can buy a tractor, semi, a school bus with a cummins it has nothin to do with dodge.
gorillacatapilla 2 months ago
Now that's what I call a Cherry Picker!
briansmobile1 3 months ago
@briansmobile1 Must be nice to have a crane kickin around eh???
jmanwild 1 month ago
@jmanwild HeAVens YeS!
briansmobile1 1 month ago
A lot of work, but you now have one hell of a truck, nice job man!
RichmanJ93 3 months ago
What frame did you put it on?
Nowochin 5 months ago
why didn't you put an inter-cooler in it?
StPatrick678 5 months ago
was the motor from an 89 or a 90? half way through 91 they put an intercooler on them from the factory.
cool truck
TheWrectify 5 months ago
you umped up the pussy factor if your ganna use a cummins motor buy a dodge not a piece of shit chevy
01161996bubba 5 months ago
Why not just buy a Dodge Pickup?
MOJONIXION 5 months ago
@MOJONIXION some people are more creative and resourceful than others, clearly.
bradenn 5 months ago
@MOJONIXION because chevy runs deep,
RooRBud 2 weeks ago
I'm in the middle of the exact same swap! I have an 82 crew cab 4x4 dually and i have a 12 valve out of a 90 dodge truck. I'm running a 518 trans and noticed you were running an automatic, how did you hook up your shift linkage since the dodge linkage is front to back and the chevy is up and down?
Dieselguy82 6 months ago
Do you have a significant vibration problem. Some forums have indicated that there are significant vibration issue with the 4bt vs the 6bt . Does this seem to be an issue?
4bttahoe 7 months ago
Man you did a nice job of De-Lameing that truck, It looks way better, and I bet it runs like a top with the Cummins, I cant wait to get mine done.
Check out my channel if your interested, I am sticking a 12 Valve in a 72,
RichardsMetalWorks 10 months ago
thats how u git-r-done lol
giggity20081 10 months ago
Awsome truck dude.
neurocytohemotoxic 10 months ago
nice job..... you can tell your a redneck if u use a crane as a engine life
kdwedge243 10 months ago
job well done
MrMadkaw400 11 months ago
Nice Job .... two thumbs up!
possmguts 11 months ago
that shits pretty boss yo. wtf!!! 12V!?everybody run, theyre here to repossess the house!!! :O lol. i gotta 74 ford 460 V8 dually, swapin the axels and suspension out, droppin it for street look.
BrandtCr066 1 year ago
dodge never..............................
leonardfields75 1 year ago
I want one of those hoists too!
killbilly069 1 year ago
nice job
sprintcarracer77 1 year ago
Very clean swap! Much improved.
DirtyRam50 1 year ago
@Mattman7342 at least he was smart enough not to use a damn ford
greenfarmer60 1 year ago 2
bet it helps having that crane around
TexasChevrolet 1 year ago
real clean swap....nice "engine hoist" that truck will last forever
outsidefamily1 1 year ago 2
the good ol' 12valve non-intercooled
raykeens 1 year ago
did u have 2 do ne custom fitting? or change nething?
shadowboy696979 1 year ago
now why would u keep the dodge ram logo on the motor
greenfarmer60 1 year ago
@greenfarmer60 it makes him feel like its not a POS chevy
Mattman7342 1 year ago
ME WANT! nice truck
carramrod423 1 year ago
this was the only years of that model that I liked and the only truck i like bye chevy
xxbal1inxx 1 year ago
look its the best chevy
CountryBoy1571 1 year ago
nice job how much clearance is between the axle and the oil pan? I would like to do a 2 wheel drive swap, and leave the truck at the stock ride height do you think it would clear?
modelfreak125 1 year ago
dam thats one clean looking 12v
randytune88 1 year ago
beautiful engine.
cummins engine?
acuarofilio 1 year ago
no body touches the cummins
thomasdecoste 1 year ago
nice!
fordf350guy 1 year ago
Good. Now make the Chevy sing!
mjfpercussion 1 year ago
strange that a crew cab eight lug truck did not come with a hydrobooster for the brakes..maybe the original engine was a gas??
porkpig350 1 year ago
0:39 "yes why, I do have an engine crane"
Veikra 1 year ago
wasnt the crane a bit of an overkill?
irocksaysme17 1 year ago
gordyb33 nice work i love it and would u help me with my project truck some time
MUSTANGGUY23 1 year ago
what made you want to go with a first gen engine?
dieselindeed 2 years ago
i love the zip tie on the fan shroud at 1:27 ,nice truck what the hp you think cumin out of that
chevyapache1959 2 years ago
I'm planning on doing the 12v into an OBS Ford here soon. Nice truck man.
NorthernMoose 2 years ago
Im in the process of doing this to a 1971 chevy, what tranny & transfercase did you use?
atvking2010 2 years ago
holy shit that crane makes one hell of a cherry picker
troy5251 2 years ago 24
@troy5251 overkill is under rated
blackt0wer 9 months ago 2
lets see some action shots now. Love the older chevys. Love the cummins too.
dieselweasel69 2 years ago 15
cummins better not sign with gm i like the v8 diesel. up in northern maine we have had bad luck with cummins motors to be honest. cat and the mack v8 motors have proven to be the better ones.
DuramaxDiesel2500 2 years ago
oh yeah must just be maine where the cummins doesnt strive.... yea right.
glueissticky00 2 years ago
no really we have had bad luck with them. we've had only 1 good one in a crane, but the worst part about them is that they dont just want to start in the winter.
DuramaxDiesel2500 2 years ago
sick truck!!!! chevy body - cummins engine - straight front axle!!! got a big enough crane? lol
tennykimble 2 years ago
sick crane truck
nvfd103 2 years ago
beautiful
duramax250 2 years ago
Sweet truck!!!!!!
bigbubba357m 2 years ago
Nice cherry picker i wish i had one like that! great job on the build!1
dieseltechy360 2 years ago
kinda like havin a 292 in the ol tonner, but NOT my stock 12v cummins would eat any 292 I ever drove . NICE GM truck with a 150 pound crankshaft! and no offense to v8 diesel lovers, because they do work pretty well for having such teeny bottom end parts like my 440 cuda, but like all the big boy trucks (Powered with N14, ISX, C13, C15, series 60) and so forth),, the ISB has 7 main bearings instead of 5, larger rods, I mean way bigger rods, each hogging up the whole space between mains...
brent440 2 years ago
Very nice setup! The fit looks perfect. What tranny and t-case setup did you go with?
alexbrushett 2 years ago
does dodge make the best diesels, ive been seeing them all the time here in louisiana.
DexDizzy 2 years ago
No not really (at least w/o 20 grand into em after being stock). They make the most torque though because they are essentially "geared for the road" tractors with the inline 6 configuration. If your gonna sled pull and dont mind going slow and being excessively LOUD and irritating....get a cummins! If you wanna go fast and be practical while still being able to pull anything practical in daily life...get a duramax or powerstroke! Im unbiased...i love em all, but theres definately pros and cons.
bigdog5986 2 years ago
powerchoke-are you kidding???? look at the stock numbers-cummins have more power, last longer & are more durable- I had a ford diesel & even with a banks sidewinder kit it was still a turd. my other cummins has stock exhaust & is as quiet as my other gas truck, & gets over twice the mpg
turfguy87 2 years ago
Must of had a REALLY loud "other gas truck lol!! Hear of the scorpion....thats wat i thought!
bigdog5986 2 years ago
dodge doesn't build diesels... the ones in the Jeep grand cherokee are from Mercedes Benz, and the dodge ram diesel is Cummins. Cummins makes some really good engines.
The brand fricken new '10 Ford Powerstroke is NOT made by international.
ChevelleSSLS6 2 years ago
Good detail on a tricky retrofit. The Cummins 6BT5.9-160 is a shoehorn fit for an engine bay intended for the Detroit V8-6.5 and Chevrolet V8-454. Incidentally, Cummins has block plates compatible with the Spicer ESO66-7B and Delco direct-drive starter for several B-block applications.
bcschmerker 2 years ago
the way a truck should be built
BigTex4855 2 years ago 2
Nice clean work man, I Love the look of those old Chevs. I have thought about taking the Body off my 89 Burban and dropping it on my 2500 Dodge 4x4 frame. I figure it will be easier then the other way around LOL!
LostZuk 2 years ago
non-intercooled? bad idea hope you have water injection if you're gonna do heavy towing!
dieslpower2 2 years ago
sick, was that a hiab hoisting the engine into place ?
dcForge 2 years ago
This comment has received too many negative votes show
Never put a Cummins in a GM, even if its by yourself!!! Stay with Dodge. they should have never put a cummins in Ford.
MPLSTORM 2 years ago
Again with the spreading of unsupported bull shit, Ford, Chevy>Dodge
orbitofdoom16 2 years ago
why not why the fuck should we listen to you?
nachos1990 2 years ago
MPLSTORM. You really are a fucking jackass i see you on alot of videos running your mouth. GET REAL DODGE IS NOT THE BEST TRUCK. NEVER WAS.
The only thing good about it was the cummins, Chevy truck with a cummins is the best thing goin!!!
Dustin91 2 years ago
OMG i know what your talking about MPLSTORM is a fag and have allways wanted to see a cummins in a chevy
sayer308 2 years ago
lol i know MLPSTORM is a douche bag! hes always commenting on chevy videos and what not saying dodge is better and so on.. Got into it with him plenty of times. Cummins in a chevy is the best thing going
Dustin91 2 years ago
i love how he searches for chevy videos and talks shit about chevy and goes "oh the hemi is so awesome it would own a 350" and so on one dude got so frustrated because MLPSTORM said a 2X4 dodge has a straight axle up front so he made a video that showed it had IFS on a 2X4 lol what a tard
sayer308 2 years ago
Dude i know exactly what ur saying hes a douche bag and constantly is commenting dumb shit on chevy videos about hemis and dodges and so on... The only thing dodge has going for it as far as im concerned is the cummins diesel. Which dodge doesnt make.
and mlpstorm is a tard he probably doesnt know what IFS or SFA even is. lol
Dustin91 2 years ago
100% agree the only thing dodge has is cummins which they can't make on their own
that power usually doesnt even make it to the ground because of their shitty trannys... not only that but somtimes they will randomly go in reverse which has killed like 13 people and they still use the same tranny and dont even get me started on chryslers 2.7....
Bottom line: great engine shitty everything elce that chrysler makes lol
sayer308 2 years ago
Yeah dodge is pretty much worthless, ive never liked dodge. I'm a chevy guy but would take a ford over a dodge any day. I was reading a comment somebody left on a video earlier..
There like your buying the cummins engine, you get the dodge for free. lol.
There trannys arent worth a shit, they rust to shit, just garbage. I wish chevy had cummins!! that would be the shit
Dustin91 2 years ago
Chevy deserves Cummins way more than dodge if they had it then all they need is to make a SFA on the HD's instead of IFS then it would be PERFECT Their IFS isnt as bad as people say though mine takes quite a bit of abuse, its just when your pulling in 4X4(which is very rare)that you might have a problem but if your doing sled pulls you have to be ready to spend money.I think of dodge through one of ron whites jokes if you put $1000 on a peice of shit it looks perty nice. Cummins=$1000 dodge=shit
sayer308 2 years ago
Glad you agree with me, and yeah that would be sweet if chevy had sfa in the front, i mean IFS is okay... Chevys ride way better than a ford or dodge in my opinion. Only problems ive had with IFS is when your snowplowing with trucks with over 200k on them the cv shafts tend to snap, or the boot rips and the grease wears out and they click, then there done. (my work has quite a few 90s chevys with about 200k +. Someone said dodge owes cummins a lot of money and arent going to be able to use
Dustin91 2 years ago
their engine anymore. I'm not sure if thats true but its just something i read on here and forgot to talk to the guy about it. The duramax is a good engine, and people say their japanese etc... They are actually not GM builds them, they were a joint design and now there GM. But cummins would be better in a chevy.
On a quiet day you can hear a dodge rusting! :) lol
Dustin91 2 years ago
sayer308 2 years ago
Yeah i believe in masillan ohio or something like that... I'm from ohio like cleveland area, theres a GM plant by my house also a ford plant. But yeah i have rode in some dmax's and they got some balls, and ya cant beat an allison trans. Me and my father hauled a 16,000lb ford f600 on a tri axle trailor with a dmax chevy dumptruck, no problem. Takin them fords where they belong, THE SCRAP YARD lol. And i love all the ford n dodge jokes. I agree i used to have an 87 chevy lifted 9" with 35s, it
Dustin91 2 years ago
@Dustin91 you love the dodge and ford jokes but your watching a video about swapping a dodge cummins into a chevy hmmmmm
bigbadbronco86 1 year ago
@sayer308 chevy:
piece
of
shit
with
crappy
reliability
and
re-sale
value
bigbadbronco86 1 year ago
@bigbadbronco86 ford Fucked On Race Day, Fucker Only Rolls Downhill, Fucked Over Rebuilt Dodge by the way chevys have great resale value. Mustangs have the worst resale value its pathedic.
sayer308 1 year ago
@sayer308 really if you think thats true then you dont know much about cars, lets look at how much a 79-93 5.0 gets vs a 82-92 camaro lmao chevys can be had where i live for dirt cheap
bigbadbronco86 1 year ago
@bigbadbronco86 well where the hell do you live because around here its completely backwards you must be lookin at some rustbucket camaros and restored stangs by the way i just got a 02 silverado 4.8 with 67000 miles, 4x4 regular cab short box and ran me about 13k... crappy resale my ass
sayer308 1 year ago
@sayer308 hahaha i think they call that getting ripped off friend lmao
bigbadbronco86 1 year ago
@bigbadbronco86 no its called its a nice truck with a outstanding maitence record from one owner, i couldn't find one thing wronge with it no scratches or anything, the dealer didnt even have to clean the truck it was in that good of shape, you could of ate off the engine, plus the previous owner put some rally rims on it with 32" tires
sayer308 1 year ago
@sayer308 wow an 8 year old truck for 13 thousand hahaha BRAVO
bigbadbronco86 1 year ago
@bigbadbronco86 you were just talking about how good of resale value ford has and how bad chevy has?!?! are you fuckin high? so are you saying ford has worse resale value than chevy? like i just said... (it helps if you pull your head out of your ass)
sayer308 1 year ago
@sayer308 pull your head out of your own ass first, regardless of the miles you paid 5 digits for a 4.8 equipped truck lmao you can get 05'-06' chevys with 5.7's for 10k unless someone is trying to pay it off and still owes more then its worth. read what you just wrote, and maybe next time you can form a coherent sentence, im not gonna sit around and argue what i know is true with a dip shit like you, for god sakes you paid 13k for an 02 hahahahahah moron
bigbadbronco86 1 year ago
@bigbadbronco86 ok one who gives a flying f if it has a 4.8 theres like 10 less hp and 30 less tourque, second your calling me stupid they stopped using the 5.7 in like 98, third who gives a shit about grammar its youtube, this truck could pass off as if we were in the year 2004 again, you would understand if you took a look at it and finally you must have no life because you can respond within an hour or two... your pathedic
sayer308 1 year ago
@sayer308 o so now they dont use 5.7 350s the most widely used chevy motor ever produced, ok man. even still you could have gottan a 5.3. even if i was pathetic, atleast i can spell the words i use hahaha youre more then welcome to continue making yourself look rediculous it doesnt bother me a bit
bigbadbronco86 1 year ago
@bigbadbronco86 why do you care if it isnt a 5.3 it gets me around just fine and still has plenty of power, i love how when people run out of comebacks this turns into fuckin grammar school, why do i care what youtube people think about me, i have real friends you know, probably unlike u by the way please show me a DECENT 05-06 silverado for 10k
sayer308 1 year ago
@sayer308 it doesnt matter to me one way or the other youre the lifelss asshole that paid 13k for what might as well be a 6 cylinder lol and its not about comebacks its about you being a 4th grade drop out hahaha
bigbadbronco86 1 year ago
@bigbadbronco86 i paid 13k because THATS WHAT ITS WORTH you jackass, if i could go back i would do the same thing, its the same damn block as a 5.3 only with a shorter stroke and it has a lot more power than a V6 and im pulling straight A's so shove that up your ass oh and your telling me i dont have a life when you check your damn youtube every hour you really are that pathedic i can spell correctly when i want but i got better things to do than make perfect sentences
sayer308 1 year ago
@sayer308 does one of those things include making yourself look like an ignorant imbred retard lol i think so
bigbadbronco86 1 year ago
@bigbadbronco86 oh i wish i could be cool like you and spend my life on youtube and try to talk shit, you make no fuckin sence you say that chevys have crappy resale then i tell u i baught one for 13k after tax and your saying i got ripped off, if i got ripped off then so did alot of other people, you really have no idea how hard it is to find a truck like this in great condition with only 67k miles just give up and admit your wronge
sayer308 1 year ago
@sayer308 ok man then you go ahead and tell me why then at the food lion auto fair did i see a sharp wine red 2002 gmc extended cab w/ 120k mi with an asking price of $2500? and tell me why my neighbor bought an 01 4x4 with 150k for $4500? tell me why the dealership my shop fixes cars for sells them all day for between $3500-$6500? tell me one last thing, why did my other friend scoop up an 02 gmc regular cab for 3500? please answer me all those and i will say idk what im talking about
bigbadbronco86 1 year ago
@bigbadbronco86 ok type in 2002 silverado on Lincoln nebraska craigslist, i found one that looked decent but had 322k, either all of thoes were piles of shit or your lieing
sayer308 1 year ago
@sayer308 lol of course thats the only thing you have to say is that im lying lol i dont give two shit if you believe me
bigbadbronco86 1 year ago
@bigbadbronco86 Your so full of it. The only way that could be true is if all of thoes have a salvaged title and drive like shit. I know what they're worth and theres no way in hell that your gonna get a even half way decent truck with 122k for $2500. That one truck with 322k had a asking price of 5500. Theres one just like mine with different paint and 100k miles asking 11k. Im not stupid I looked around for about 3 months trying to find a nice one and I know I got a good deal.
sayer308 1 year ago
@sayer308 lol yeah ok im full of shit, but with all the talking youre doing it sounds more like youre trying to convince yourself that you got a good deal instead of me hahaha loser
bigbadbronco86 1 year ago
@bigbadbronco86 See I knew you were lieing. Thats because talking to you is like convinceing a whale that its a butterfly. Get a life you jackass.
1985k20silverado 1 year ago
@1985k20silverado shut the fuck up faggot it was sarcasim bitch its all the truth and i dont give a fuck if you or any other ass hole believes me
bigbadbronco86 1 year ago
@bigbadbronco86 good luck getting anyone to believe you you lifeless jackass
1985k20silverado 1 year ago
@1985k20silverado good luck on blowing men hahahaha
bigbadbronco86 1 year ago
@bigbadbronco86 i wish i could be as cool as you
1985k20silverado 1 year ago
@1985k20silverado i have no doubts about that
bigbadbronco86 1 year ago
@bigbadbronco86 everyone wants to be cool like you and talk shit on youtube and bein a keyboard warrior, get a life..
1985k20silverado 1 year ago
@1985k20silverado yeah thats great, but youre just like all the other morons on here you start running your mouth to me and i make you feel stupid but yet i need the life, look back and read man youre the one who ran your mouth first, so maybe its you that needs to look into getting a life hahahahaha
bigbadbronco86 1 year ago
@bigbadbronco86 i dont feel stupid at all i think your the pathedic one here stalking me on youtube now... how old are you anyways?
1985k20silverado 1 year ago
@Dustin91 acutually they still are a joint venture gm owns 60% and isuzu owns 40%that heads crank and rods come from japan dont believe me pick up december 2010 diesel power and they toured the dmax plant in moraine ohio gave away all the dirty secrects about the dirty trash diesel
jonesd5o 1 year ago
any Cummins needs a NV4500HD or a NV5600 or an Allison..... i have a 91 dodge cummins and the transmission is bullshit... im trying to find an NV4500 for mine, id go for a 5600 but....i dontt need double bull, thats just nuts, its gonna be a street rod truck, not a bulldozer.
Valeofagony 1 year ago
@Valeofagony buy the adapter plate and put a TH400 behind it.
rthom86 1 year ago
had over 200k on it, me and my father built it when i was like 14. But man that would be great if dodge couldnt afford to use cummins anymore and they signed with chevy.
A chevy truck, allison tranny, and a cummins turbo diesel. = 1 hell of a truck. The 6.0L vortec is a pretty beastly engine tho.
Dustin91 2 years ago
nice job on this great project!
DieselsAndDiodes 2 years ago 2
Very clean, very nice.
jeepnuts4u 2 years ago 2
this is a bad ass truck. This is my favorite body style chevy, and in my opion the best diesel motor ever built.
TheWilldady 2 years ago
I like that it says Dodge Ram and it's in a Chevy, cool truck man wish I could do that with mine.
StillenGtr17 2 years ago
ummm, they did put the 518 od in the 91.5-93 diesel trucks.
Nice swap, as far as the ve pump, I would take it over a p-pump and day.
mollette1 2 years ago
sweet
Finch2009 2 years ago
the 518 was in the Jeep cherokee this is a 618 same parts just on a larger scale. these trannys will really perform when cranked up with a billet converter. I own my own trans shop.
Ryanberthel 2 years ago
Ive seen a lot of those trannys come thru the transmission shop i worked at. They were in jeep cherokees. Hope it holds up well.
grangeroo 2 years ago
whered you pick up the 5.9?
fukkjoshh 2 years ago
u built yourself a nice truck pal. excelent job have fun in it
Z71White 2 years ago 4
Was it hard to convert it from 2 to 4 wheel drive, or is it a different frame?
HilBil91 2 years ago
i ain't crazy bout duals, but that must be nice to have
yamahayz250fairman 2 years ago
How much did it cost you to make it
AbrahamCavesss1990 2 years ago
Damn that's a nice truck! How much did it cost you to make it?
DODGEDIESELNUT 2 years ago
thats the older cummins
mossbergtakedown 2 years ago
THATS WAY COOLER THAN ANY NEW DIESEL TRUCK...i wannit
zachmajic89 2 years ago
when in doubt.......use a crane truck
79pete359 2 years ago
WOW!!! thats a beast!!! love it. should've intercooled it though, swap in some electric fans instead of that big crank driven one. GOOD JOB (:
zachmajic89 2 years ago 2
drop an ISX in there!
WireGreasingHero 3 years ago
nice truck! check my chevy out
troutmansam 3 years ago
the picker truck was a little over kill don't you think lol good job. nice picker as well tri-drive you must really move some iron.
mog5858 3 years ago
Now thats a Truck!!! I love it!!
67to72chevys 3 years ago
Very nice! I am doing a cummins install into my '91 GMC R3500 VERY soon, I hope it looks as clean as yours!
cowboycustoms 3 years ago
holy shit is that ever clean dude
1845c 3 years ago
is that a lawnmower with a sprint car conversion at 55 seconds
wellnahgetreal 3 years ago
So your telling me that you did all that hard work and dont get me wrong it looks awesome. But you put in a non inner cooled rotary pumped 12 valve in. I mean come on. I would of at least put in a p pumped engine to where you could of got some power out of it.
59chumminz 3 years ago
apparently you have never seen what a VE pump can do? There is no mistaking a p7100 for power, But dont underestimate the VE pump!
cowboycustoms 3 years ago
Very very cool! 5 stars! I'm dying to do just that with my free time , that never seems to come around, hahalol. You gotta post with the truck running and audio. The older chevys are hard to beat for a classic look. I love dodge but the first nice looking truck they made was 02-03. Go for it. lotsa luck to you all.
ramdslpwr 3 years ago
I'm doing that exact same swap into my '83 chevy k20. what you runnign for a tranny? and major issues you ran into during the swap
tltcrawlr 3 years ago
tltcrawlr: am running a 727 dodge three speed tranny with 4:10 gears. added a couple of extra cross members and 2" more spring lift in front end. other than that just lots of time.
gordyb33 3 years ago
That pretty cool, great job!!
1982yota 3 years ago
what mods did you have to do to make the swap work?
derr06 3 years ago
gordyb33, that is a 1989 to early 1991 12-valve non-IC'd engine. Whatever it is, nice job and keep up the good work.
DieselMikey084 3 years ago
Wow !! Excellent Job there friend... I love it . The cummins has one sweet sound eh..
I have a question though, why the cummins??
Cheers......
h2oboater 3 years ago
Awesome truck. Must be a 1989-1991 12-valve non-intercooled engine?
DieselMikey084 3 years ago
I want to see it run!
Chevysaresupercool 3 years ago
Very nice. I used a truck from work once with a palfinger boom to disect my truck too. They work good.
1958johndeere620 3 years ago
This has been flagged as spam show
this guy is a fag. cummins suck but the ford in the back ground is sweet
JEngeland 3 years ago
Cool
antiestablishmentist 3 years ago
Fuckin' awesome...
wiseguylt4 3 years ago