brother LC38 LC67 LC61 LC65 LC980 LC990 LC1100 Recycle Catridge Refill MIPOHK 提供

[JnQc13]

Why did I ended up here after a bong hit video?

[eduardopato11]

english please I don't understand chine

[KazKylheku]

YOu rock man! I just figured out how to do this myself. Just inject very slowly through the outlet hole, and push the pin to relieve pressure. Hold it upright and watch the little window for the level so you do not overfill (because then the ink will squirt out through the pressure valve!) Good idea with the rubber band, man.

[vampi20101]

ALGUIEN SABE DE ESTO EN ESPAÑOL GRACIAS

[vampi20101]

ALGUINN SABE DE ESTO EN ESPAOL GRACIAS

[vivi519]

PLEASE REPLY!! is this the same procedure for LC51 too????

[seyfi84]

I don't understand Chinese, can you tell what you explained about vacuum? Does it have to have vacuum after you fill it? or the opposite?

[KazKylheku]

@seyfi84 You do not have to develop a vacuum. These cartridges work even if you drill a hole in them (which is what we want to avoid!!!) A vacuum will develop if you suck old ink with the syringe. Just press the pressure relief valve pin to let air in. While filling, press the pin to relieve the air pressure building at the top. You must hold the cartridge upright, so the air bubble is where the pressure relief valve is, otherwise the valve will spray out ink when you push the pin!

[mipohk]

LC39 Can Refill

[acooarioom]

PLEASE ANSWER!!!!

Can I refill the lc-39 with ANY way (even trying to open it)

PLEASE ANSWER! I'M GOING TO BUY DCP-J315W

AND I DON'T KNOW IF IT'S REFILLABLE!!!

PLEASE ANSWER!!!

[asiangirl993]

Love ya! It fucking worked =D

[arcassens]

Where can I get the connector for the syringe to insert into the ink inlet of the L61 or L65 cartridge? It appears to enable the ink to flow into the inlet.

[KazKylheku]

@arcassens There is no connector! The cartridge has a rubber receptacle built in for this.

To enable the ink to flow, you must press the pin on the opposite receptacle at the top of the cartridge.

This is why he uses a rubber band: to depress the sliding sleeve to get better access to the pin.

You don't have to push the pin all the time, just jiggle it every few seconds while filling to relieve the pressure. (Or while drawing out old ink, if you wish, to relieve vacuum.)

[arcassens]

Where can I get the connector for the syringe to insert into the ink inlet? I can't seem to find it locally.

[cheeyc]

lc38 cartilage brother printer can replace with lc67 or lc39 or any model?lc 38 volume is small...

[mipohk]

@cheeyc

Yes

[ongchorcool]

My local Refill shop said it is impossible to refill lc38 ink!

[mipohk]

@ongchorcool

may be your local refill shop don't hv the technical skills yet, at our side, it's easy skills and our video hv shown you.

[ongchorcool]

@mipohk now i know it!

[drguruprathap]

simple and easy, the best method to refill 

[razvv55]

with lc985 work? Thanks!

[mipohk]

ok work