You made and did all of this to pop one cernal of popcorn? I can go to the store and buy a pack of popcorn, that has a whole bowl full of popcorn in it, that u pop in the microwave in less than 3 min. AND is buttered..........................really?
@wasabullfrog2 Hello, one needs to wear OD4 laser safety googles covering 445 nm light (OD4 corresponds to a sufficient level of vision protection for a 1 watt laser in close quarters). Search on my newer laser popcorn video, "Arctic Laser Popcorn" where I show the type of goggles needed.
The lasers required to pop an entire bowl of popcorn must use up a lot of energy, since a lot of it is lost due to efficiency loses, more so than using a microwave to pop popcorn, or a popcorn maker. Wouldn't it be easier to use a popcorn maker? Plus you can pop a bunch at one time, instead of one at a time.
@henhen7890 the point was to show that yes it is possible for someone of a nerdy bent to pop popcorn at home with lasers. I actually did an updated version where I made it without glue and ate the popcorn. You can find the updated version by searching YouTube for 'Arctic Laser Popcorn'. Thanks.
@xeeweexRC actually they didn't really. The University Lab they engaged for the show did it with a ridiculously expensive 10 watt invisible infrared laser. This demonstration was performed in my home using easy to acquire visible lasers.
@WorldScott well actually it wasn't invisible, if you watched the clip it was a violet laser, and besides from that, they still kinda popped popcorn with a laser. :P
@xeeweexRC it wasn't purple. The laser was invisible. What was purple was the screen connected to the camera showing where the laser was. Other than the fact that laser light popped popcorn there's hardly any comparison here. A well funded University lab with expensive equipment doing something is not equivalent to a laser hobbyist at home doing the same thing.
@WorldScott i guess so but, laser+popcorn=popped kernel, they used a LASER to POP THE POPCORN, even though, where do you buy those lasers frm??????? and for how much?
@lolzersdsi :-) there has already been a 'next time'. I used a cookie to hold the kernel of corn. Search on YouTube for "arctic laser popcorn" to see that video!
@Rexar4living as I recall I paid about $250 to $300 for each one but I had my hosts custom made by jayrob out of flashlights. You can probably find a decent one manufactured in China for around $200.
@TiTanAEfull about 24 seconds. So if we say that each bucket of popcorn has about 200 kernels in it then 200 kernels x 24 seconds = 4,800 seconds for 1 bucket. So to find out how many seconds for 200 buckets we multiply 4,800 seconds for 1 bucket x 200 buckets = 960,000 seconds. What is that in real time? 960,000 seconds = 16,000 minutes. 16,000 minutes = 267 hours. 267 hours = 11 days and 6.6 minutes. Can you wait that long?
@TiTanAEfull No joke, math can be seriously fun. I figured that out some years ago when I needed to do some spacing of lights for a cool toy I was making for myself and had to use some ninja-level math to help me. I know it can be boring to learn but once you know it, it's great to be able to come back to it and use it when you really want to!
@friteza88 mostly to be silly. In reality I just love getting comments from people as I usually respond to nearly all of them. Thank you for leaving a word!
@joegadd I actually had these two built for me as flashlight hacks but you can buy equivalent lasers from companies like Wicked Lasers (the best known), Dragon Lasers, O-Like, and Rayfoss. You can get a brand new 1 watt blue laser for under $200 if you look around. I am trying to work out making a video that show how to build a pocket 1 watt blue laser for even less.
@sciwalk that's funny you should say that because I was thinking about doing something like that. Spindle forming with the laser either plastic or wax. I will probably try that out. I haven't tried to light a candle with either of the lasers in the video but I should try it out for sure.
That doesn't look good.
TheOnlyFishdevil 2 days ago
So you did all that work to pop ONE kernal?
TheEpicToasterizle 2 days ago
2:49 - Congratulations! Your KERNAL has evolved into a POPCORN! Would you like to give your POPCORN a nickname?
BarrowBoy8x2 2 days ago
stop talking and pop the damn corn!!!!!
thejugglerkid 3 days ago
FRICKIN AWESOME!
MiLkMySeXyPuRpLeCoW 3 days ago
You made and did all of this to pop one cernal of popcorn? I can go to the store and buy a pack of popcorn, that has a whole bowl full of popcorn in it, that u pop in the microwave in less than 3 min. AND is buttered..........................really?
greengirlx2 3 days ago
sufffcusudcu this made me blind anscian;dlckn[owdSANC :)
LongboardingNow 3 days ago
Hey whats the range in which this could burn someones eye out? because i have some , err..... buisness to take care of
Rob27Walsh 4 days ago
one down 499 to go
alekk1kill1 6 days ago
or use a microwave...
xDkcinnickxD 6 days ago
ok, reasonable priced home lasers... only 600 dollars...
GlaedrSkulblakaz 1 week ago
GREAT SCOTT! (back to the future)
Emk4630 1 week ago
1 of 524 corns.....
Russelboy14 1 week ago
i would eat that if you didn't glue it on
OscarTechno 1 week ago
1:32 is what u came for.
Rickrolled1231 1 week ago
thumbs up if you want popcorn (not with glue on 'em) !!!!!!!!!!!!
KTtutorialsDK 1 week ago
did you use use a hot glue gun with out gloves
MrGxMoto 1 week ago
this must be how they make pop corn in movie theatres. (at least it would be explain price)
death0intj 3 weeks ago
aswosme i what popcron
11079evan 4 weeks ago
2:50.
TechiProductions 1 month ago
you can also put a bag of these kernels in the microwave =same result
hzsgtz 1 month ago in playlist Cool Laser Videos! WorldScott's - IMG * List
I want popcorn 😝😝😝
TheMeperson1 1 month ago
guess. what scott you can also do that in your microwave
gamebeast1818 1 month ago 5
@gamebeast1818 with hot glue? make your complements more detailed
lillfinetunnings5 17 hours ago
you can either make a bowl of popcorn in 2 mins in the microwave, or 2 hours individually popping the kernels with lasers :P
madtown225 1 month ago
Isn't 1 watt enough to blind you off the wall?
PykohYT 1 month ago
AAA-MAAA-ZIIING!
GiantJordi 1 month ago
You sound like a child molester.
icuh82 1 month ago
You are talking like you talk to IDIOTS!!!
FuzzyJ4 1 month ago
lets make POP COORNS with leiiiiserss
Spyker995 1 month ago
just use microwave or stovetop
BlooDish14 1 month ago
I want POP CORN!! :)
skiracer4568 2 months ago
@skiracer4568 Forgot the nose :-)
skiracer4568 2 months ago
my fart sounded exactly the same!
MrRaptur3 2 months ago
all that effort for some popcorn id go to the cinema
karlands97 2 months ago
disco kernel ._.
TheNeilzorz 2 months ago
STOP READING A SCRIPT LOL
thedanielchacko 2 months ago
i loved it when u said curnell
ModernWarfareQsShotz 2 months ago
i want popcorn yo!
flips2be 2 months ago
this is cool ... but the dude talkin is such a nerd
hoboclan071398 2 months ago
Im only 1 min in the video, but imagine doing this to every singel popcorn.. I think your date would be bored after maybe 3..
keyar87 2 months ago
But who'd eat popcorn with hot melt glue?
PokemonRulez2468 2 months ago
This explains why cinemas charge so much for popcorn.
Audinos 2 months ago
ill take some pop corn;)
SuperBigmac49 2 months ago
told u not to cross the beams
metalheadkirby 2 months ago
i want popcorn!!!!!
i watch mythbusters too
:D
tolezifo39 2 months ago
can i hav a popcorn
mario22214 2 months ago
please can i have some laser popcorn
milo78910112020moshi 2 months ago
What type of eye protection is needed for this? Obviously, you wouldn't look directly into the laser, but what about reflections off the corn?
wasabullfrog2 2 months ago 5
@wasabullfrog2 Hello, one needs to wear OD4 laser safety googles covering 445 nm light (OD4 corresponds to a sufficient level of vision protection for a 1 watt laser in close quarters). Search on my newer laser popcorn video, "Arctic Laser Popcorn" where I show the type of goggles needed.
WorldScott 2 months ago
@WorldScott im looking into 2000mW lasers, do you know what kind of eyewear i need for this? also any good sites for lasers over 1w?
UltraDrago2000 2 weeks ago in playlist Cool Laser Videos! WorldScott's - IMG * List
i feel like im in school again
LORDOFVIOLENCE10000 2 months ago
id still eat it :)
malak2599 2 months ago
i think u should make sure there is no exes hot glue before u eat it or you will get sick or...YUCK! THIS TASTE LIKE [BEEP]!
opensynapsesame 2 months ago
no thanks id rather take 2:30 seconds to wait for a big bag of popcorn instead of the same siz but takes an hour wuts the point but its still cool
therex2312 3 months ago
MMM hot glue lol Thats amazing :)
samiroshon440 3 months ago
Mmm... let me try lazer popcorn!
Plasmaflix 3 months ago
i want lazer popcorn
LiamPicachu2 3 months ago
Disco ball made of corn please?
BiggieMackDaddy 3 months ago
i want popcorn! lol
thomasdragsbaek 3 months ago
Or... Put it in a microwave...
dominic361 4 months ago
i like popcorn not with clue
MrIkilyou 4 months ago
now this is true fun! :D
drbelli 4 months ago
This has been flagged as spam show
▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄ ▲ ▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ ◄▼ ◄ ▲ ► ▼ ◄ ▲ ► ▼ dammit. i dropped my bag of doritos. NO ONE TOUCH THEM.
FinNishAirSoftMaker 4 months ago in playlist More videos from WorldScott
i want popcornr
fatharrypotter55 4 months ago
NOM NOM NOM
DerpedGaming 4 months ago
i want popcorn
twinondabeat 4 months ago
The lasers required to pop an entire bowl of popcorn must use up a lot of energy, since a lot of it is lost due to efficiency loses, more so than using a microwave to pop popcorn, or a popcorn maker. Wouldn't it be easier to use a popcorn maker? Plus you can pop a bunch at one time, instead of one at a time.
thwang99 5 months ago
Now I have a use for my artic.
discodave69691 5 months ago
i hungry for popcorn now because of your video
ultimatemodshop 6 months ago
i just ate the pop cor n
repmatspiks 6 months ago
I just ate popcorn
TheTwilightBlood 7 months ago
I want popcorn!
Also, what if you used a handful of DVD drive lasers to heat a thermally conductive bowl to pop several, not just one, kernel?
taitaisanchez 7 months ago
Need popcorn !!!!!!
luismedin100 7 months ago
eh, not in the mood for popcorn
bootsmyler97 7 months ago
Give me me my pop corn-=-
TheJordTV 8 months ago
When you glue the popcorn its not edible. But good video and great way to make popcorn.
YouthFreedomFighters 9 months ago
i want pop corn
randomness2132 9 months ago
sorry i have bad aiming :)
SufiyanJackson5 10 months ago
Ahhh, practicality(:
Macdawg347 11 months ago
This has been flagged as spam show
Why would you want one popcorn with hot glue on it ?????????? Are you crazy
lugia116 11 months ago
Why would you want one popcorn with hot glue on it ??????????
lugia116 11 months ago
ME
1rockbunny1 11 months ago
YOU ARE A NERD!!!MAN!!!!!
jjkastelz 11 months ago
FUCK MICROWAVES i will just use an arctic spider 3
AirsoftShenanigans 11 months ago
I want porn
Botopo101 11 months ago
I want popcorn please please
Respecthebrotherhood 11 months ago
whats the point if you only have one popcorn, and its suck to glue?
henhen7890 11 months ago 10
@henhen7890 the point was to show that yes it is possible for someone of a nerdy bent to pop popcorn at home with lasers. I actually did an updated version where I made it without glue and ate the popcorn. You can find the updated version by searching YouTube for 'Arctic Laser Popcorn'. Thanks.
WorldScott 11 months ago 2
mythbusters already tried this
xeeweexRC 1 year ago
@xeeweexRC actually they didn't really. The University Lab they engaged for the show did it with a ridiculously expensive 10 watt invisible infrared laser. This demonstration was performed in my home using easy to acquire visible lasers.
WorldScott 1 year ago
@WorldScott well actually it wasn't invisible, if you watched the clip it was a violet laser, and besides from that, they still kinda popped popcorn with a laser. :P
xeeweexRC 11 months ago
@xeeweexRC it wasn't purple. The laser was invisible. What was purple was the screen connected to the camera showing where the laser was. Other than the fact that laser light popped popcorn there's hardly any comparison here. A well funded University lab with expensive equipment doing something is not equivalent to a laser hobbyist at home doing the same thing.
WorldScott 11 months ago
@WorldScott i guess so but, laser+popcorn=popped kernel, they used a LASER to POP THE POPCORN, even though, where do you buy those lasers frm??????? and for how much?
xeeweexRC 11 months ago
@WorldScott where can I get such a laser?
8LiGhTs8 3 months ago
just about 300 more kernal to go!
legodude6666 1 year ago
Next time do butter. Not glue
lolzersdsi 1 year ago
@lolzersdsi :-) there has already been a 'next time'. I used a cookie to hold the kernel of corn. Search on YouTube for "arctic laser popcorn" to see that video!
WorldScott 1 year ago
i want popcorn!.......damit..,so stinge!...
aguydudeperson 1 year ago
or you could use a microwave
Magicrules508 1 year ago
muito legal, não sabia que podia ser feito com tanta facilidade, hehe
abraços do Brasil! \o/
DragaoDourado1 1 year ago
only 900 more to go hurry up im getting hungry dont forget butter and salt
rolficus 1 year ago
@rolficus excellent comment! LOL!
WorldScott 1 year ago
2:25 Don't cross the beaaaams!
MrMerlinsBart 1 year ago 4
@MrMerlinsBart Yes Egon! LOL!
WorldScott 1 year ago
@MrMerlinsBart why?
porsupuesto100 2 months ago
i want the pop corn good video
Mr71seventyone1 1 year ago
"Let's Make popcorn with lasers" haha
good video
CincinnatiBallers 1 year ago
@CincinnatiBallers Thanks! "haha" comments are the best! :-D
WorldScott 1 year ago
I want popcorn
cardpopcorn13 1 year ago
Thats a powerful laser!
Rexar4living 1 year ago
@Rexar4living yes indeed, they both are powerful 1 Watt lasers! :-)
WorldScott 1 year ago
@WorldScott Wow, how much did they cost?
Rexar4living 1 year ago
@Rexar4living as I recall I paid about $250 to $300 for each one but I had my hosts custom made by jayrob out of flashlights. You can probably find a decent one manufactured in China for around $200.
WorldScott 1 year ago
@WorldScott Thanks!
Rexar4living 1 year ago
lol
juniortore1 1 year ago
i will hawe some popcorn! :)
supersutten 1 year ago
i would like popcorn
NeedSomeMods 1 year ago
i want 200 buckets of popcorns, please !!! how long did you need for this...
TiTanAEfull 1 year ago
@TiTanAEfull about 24 seconds. So if we say that each bucket of popcorn has about 200 kernels in it then 200 kernels x 24 seconds = 4,800 seconds for 1 bucket. So to find out how many seconds for 200 buckets we multiply 4,800 seconds for 1 bucket x 200 buckets = 960,000 seconds. What is that in real time? 960,000 seconds = 16,000 minutes. 16,000 minutes = 267 hours. 267 hours = 11 days and 6.6 minutes. Can you wait that long?
WorldScott 1 year ago
@WorldScott It Yeah , it is faster than the post office
( wow, math is fun :) )
TiTanAEfull 1 year ago
@TiTanAEfull No joke, math can be seriously fun. I figured that out some years ago when I needed to do some spacing of lights for a cool toy I was making for myself and had to use some ninja-level math to help me. I know it can be boring to learn but once you know it, it's great to be able to come back to it and use it when you really want to!
-Scott
WorldScott 1 year ago
@WorldScott you right ^^
TiTanAEfull 1 year ago
microwave more powerful than laser........
LUXXXable 1 year ago
@LUXXXable indeed, by orders of magnitude! Thanks for your smile inducing comment!
WorldScott 1 year ago
what the power of the laser plz?
daforiu 1 year ago
@daforiu 1 watt for both lasers but a pair of lasers that have as low as 600 to 700 mW of power will also work. Cheers.
WorldScott 1 year ago
Yes I would love some popcorn!
AIphaDog 1 year ago
i wat popcorn :D
secretmike558 1 year ago
"lets make popcorn with lasers" haha
TheSOURoctopus 1 year ago
@TheSOURoctopus That just sounds funny, doesn't it? LOL!
Thanks for your comment!
-Scott
WorldScott 1 year ago
I was half expecting you to pan to the studio audience applauding at the popcorn, infomercial style.
godulous 1 year ago
@godulous yes, almost like Bubba Sparxx's video "Miss New Booty"! That would be funny!
Thanks for your comment!
-Scott
WorldScott 1 year ago
Yes, three kernels please. Don't think I'll have time for four.
thealaskinwonder 1 year ago
@thealaskinwonder ohhhh!!! Super cracking up over here!!!! LOL!
-Scott
WorldScott 1 year ago
That is a lot of work for 1 kernal. If I want popcorn, it will take you about 5 hours.
Network23549 1 year ago
@Network23549 of course who suggested using this single kernel method to produce popcorn? Scale up of course!
-Scott
WorldScott 1 year ago
hot glue...
cotton509 1 year ago
@cotton509 yes, needs work! LOL!
-Scott
WorldScott 1 year ago
@WorldScott :3
cotton509 1 year ago
Why would i tell you if i want popcorn ?
friteza88 1 year ago
@friteza88 mostly to be silly. In reality I just love getting comments from people as I usually respond to nearly all of them. Thank you for leaving a word!
-Scott
WorldScott 1 year ago
Reminds me of the NIF laser system, if only a bit. Cool video :D
Chewytube1 1 year ago
@Chewytube1 Yes my own little bit of the National Ignition Facility right there on my workbench!!!! LOL!! NIF FTW!
-Scott
WorldScott 1 year ago
Popcorn!!!! :D
Rarara1313 1 year ago
@Rarara1313 Love it too!!!
-Scott
WorldScott 1 year ago
Hahah, this is cool, I'd prefer sweetened or salted instead of 'glued' though, can't you stick it on the motor with syrup?
neverlab 1 year ago
@neverlab I plan to make another video where it pops without hot melt glue. When it pops the glue doesn't stick to the puffy popcorn though!!! LOL!
-Scott
WorldScott 1 year ago
i want popcorn
Sirus20x6 1 year ago
i want popcorn
Sillyzombie666 1 year ago
@Sillyzombie666 Do you prefer it buttered and salted? :-D
-Scott
WorldScott 1 year ago
This idea is made of #WIN
Great job!
FoamPackingPeanuts 1 year ago
@FoamPackingPeanuts Thanks for your comment! If you like lasers I recommend checking my channel and/or subscribing!
Cheers!
-Scott
WorldScott 1 year ago
@WorldScott I subbed :D
FoamPackingPeanuts 1 year ago
@FoamPackingPeanuts cool! May you enjoy the videos I put out!
/me checks your Barney videos... heh!
-Scott
WorldScott 1 year ago
WOW! good luck with that. let me know if you need some help, and tell me when you are finished :D
Lukis300 1 year ago
I want popcorn!
Lukis300 1 year ago 2
@Lukis300 :-D I'm now working on the popcorn teleportation device!!! LOL!
-Scott
WorldScott 1 year ago 2
where did you get the lasers? mmmmmmmm, popcorn...
joegadd 1 year ago
Respond to this video...
1 second ago
@joegadd I actually had these two built for me as flashlight hacks but you can buy equivalent lasers from companies like Wicked Lasers (the best known), Dragon Lasers, O-Like, and Rayfoss. You can get a brand new 1 watt blue laser for under $200 if you look around. I am trying to work out making a video that show how to build a pocket 1 watt blue laser for even less.
I love Popcorn!!!
Thanks for your comment!
-Scott
WorldScott 1 year ago
You should try lighting a candle. And/or, mount a candle or stick of wax on your motor and aim your laser at the wax.
Get back to work Scott!!! LOL
Looks like fun.
sciwalk 1 year ago
@sciwalk that's funny you should say that because I was thinking about doing something like that. Spindle forming with the laser either plastic or wax. I will probably try that out. I haven't tried to light a candle with either of the lasers in the video but I should try it out for sure.
Ok, back to work making more videos for me! LOL!
-Scott
WorldScott 1 year ago
Good work, especially on spreading out the heat from the laser by spinning the corn!
mkondel 1 year ago
@mkondel Thanks a lot for your compliment! I must admit that it took a bit of trial and error to figure out how to keep kernels from burning!! LOL!
-Scott
WorldScott 1 year ago
Nice!
Forssa1 1 year ago
@Forssa1 Thanks! :-D
-Scott
WorldScott 1 year ago