HK-010 Power meter review

[TheUnDeRGRouNDHoBo]

i went to plug the balance lead in wrong way around while it was connected to lipo and esc sparked smoked melted half the ground pin but it still works ; )) wish i had your smarts but would this be suitable for a say erevo with 150 amp esc and 2200kv with 2 x 3s > 5450mah 120c batteries feeding such ? my nimble experience thinks it may melt but its not fully pinned all the time

[Bazakilouis]

Nice Vid ! Did you ever try more then the allowed 60 v ? i would like to run it at 18s lipo, that is about 75v and wonder if it would survive.

[iulian207]

i tried and it burned out.the voltage regulator burn out,and it burned also the microcontroller.

[aviatorshyd]

Thats a nice review. Thanks for the heads up. Any idea if it can be re-programmed to store the peaks.... The stock program does not hold the peaks. I guess that should be a good top-up. What say?

[rurouni42]

To use the balance Port, do you have to plug a battery on the Power Source Plug?

Thanks for the help.

[aonomus]

@rurouni42 No, you do not need to use the main power plug with the balance port. Just plug the balance lead into the port (correctly!) and select the appropriate balancing mode. Its slow and passive, don't expect amazingly fast balancing.

[dfraser]

you're supposed to remove that shipping plastic from the screen, you know. :)

[aonomus]

@dfraser Shush you. :P