EEA gas boiler refill

[don91arsalan]

THANK YOU VERY MUCH

YOU SAVED MY LIFE.

[ojwrodi1]

Like below - manual was no help at all. Thanks for this!

[bmcmahon84]

thank you, you legend!

[alphasoixante]

Brilliant. Problem solved.

[butisitthough]

Thank you. All sorted :)

[1965BJT]

Excellent - just what we needed to re-set the pressure after draining the radiator to re-fit it back on the wall. Afterwards noticing we had no hot water, and fault read F22. The manual didnt help at all ... huge thanks to You Tube once again !! :-)

[wesleyjordan]

Thanks for the upload. I have a Savio and this method worked like a charm.

[k956upg]

as if most ppl on benifits have the brains to do that.

& when they do it they will fuck it up & try give extra pressure to shower by making boiler have higher pressure.

its not related but if you dont tell them then they will try it & blow the 3 bqar valve which then wont seal.

[krlplybokom]

tanks m8 my boiler is different model and make but same ideas worked so ty i can have a hot shower now :D

[titch241172]

alistar why would you put an additional loop on a vaillant when its in built and isnt required?

[Therealkeys]

Cheers buddy! All up and running again!

[rawdenashitey]

how greatfull to have youtube and people like you!

[burtonfunhouse]

fantastic...Thank you.... worked a treat now I am up and running again at no cost. much appreciated

[thecontona]

Thanks mate! Very helpful video, we really appreciate it!

[toejamnoearl]

you just saved 5 students from freezing in norfolk.

[oufc1975]

Fact. The Classic is the most popular selling boiler ever. I agree the Isar and Icos did have issues at the start. The black PCB boards were a nightmare, butr they have improved using a Six sigma rated company. The Logic boiler will give the Vaillant and Worcester a run for their money. If you think Ideal are the worst, then you obviously install Ravenheat or Arriston! Check you facts before making sure a sweeping statement.

[adamknox]

Ty!!! people who put up "how to videos" are the best on youtube! u just saved my family alot of time! :D x

[oufc1975]

Vaillant are crap overrated boilers. Try a Ideal Logic. Fantic boiler

[David5495]

Bollocks! Ideal are probably the worst manufacturer out there, with the Isar, Icos...the list goes on.

[adi1530]

shouldnt it be in 22mm?

[joop1977]

it is in 22mm up to the manufacturers connection

[adi1530]

why is the gas in 15mm?

[UtubeEmployee3387]

why not?

[ElchinMendes]

@adi1530 that paricular vaillant boiler is rather small, so 15mm is plenty

[bigwobblyspunkbomb]

i think he is showing you how to fill a sealed system in general,not just a vaillant

[David5495]

Quite disturbing, Vaillant boilers should not be fitted with an external filling loop and should only be pressurised using the internal filling loop. The pressure gauge isn't too accurate on the Vaillant ecoTEC, instead press the minus key which will display a more accurate reading of the pressure on the display. The button with the picture of a flame with a cross on it is used to reset the boiler. Fault F.22 is usually displayed when there is not enough pressure.

[joop1977]

David5495 (3 days ago) Show Hide 0 Marked as spam

Reply | Spam

Quite disturbing, Vaillant boilers should not be fitted with an external filling loop and should only be pressurised using the internal filling loop.

Why is that then?

[joop1977]

Just as i thought,no explanation as to why that is "quite disturbing".No reason whatsoever why a vaillant boiler (or any other sealed system boiler)cant be filled via an external filling loop.

[David5495]

It is stupid to have two filling loops and Vaillant advise not to, there is a built in filling loop for a reason. I didn't say that all sealed system boilers should not be filled via an external filling loop!