Metadyne MP5 Sliding Paintball Stock for the Tippmann A5 Review by HustlePaintball.com

[iLivenAmurica]

are you able to see down the sights with a mask using this stock?

[HustlePaintball]

@iLivenAmurica Like any stock, not really. Unless it is a dogleg of sorts the mask itself usually keeps your face from being able to get down low enough. 

[dudearlo]

@iLivenAmurica u can get some weaver rail parts to make a high profile sight

[xXhunter47Xx]

Eyyy. Damn using a mallet is more safer.

[HustlePaintball]

@Sticerify This is an upgrade that we have not carried and have no experience with but it seems like a pretty straightforward installation.

[Snakebiteloo]

only on a tippmann would anyone recommend using a hammer to attach something

[HustlePaintball]

@Snakebiteloo Tippmann markers are rare in that they can actually take the abuse from a hammer and still fire reliably :)

[LeSaber262]

i have a quick question, im looking to buy a mp5 stock for my a5 and the store i purchase from only has a one with what looks like a lever on the bottom of the stock that would move it, i am wondering if it will still be a good stock to buy..

[Ak74u700]

Where can I buy on of these?

[HustlePaintball]

@Ak74u700 Pm'd

[terminator363]

does this work on the new A-5, or any additional rail?

[HustlePaintball]

@terminator363 It does work on the new A5.

[terminator363]

@HustlePaintball

I heard it does not fold on the 2011 version.

[HustlePaintball]

@terminator363 The sliding stocks do not have any issues on the new 2011 A5 marker. That part of the casing was not altered.

[terminator363]

@HustlePaintball

I have a small rail attached though.

[HustlePaintball]

@terminator363 If your rail is a side-mount rail, then it will definitely interfere. What kind of rail do you have?

[terminator363]

@HustlePaintball It's a straight vertical rail but it holds on to the weaver part not the dovetail part.

[HustlePaintball]

@terminator363 Sounds like it could be a close call - you might want to email us a picture so that we can verify for sure if this will fit or not.

[613inferno]

HEY HUSTLE! you guys rock thanks for all the help so far.

question: Will I be able to put it into the ''flush" (collapsed) position with the Lapco offset sight rail attached. I have the lapco offset sight rail and have a red dot and flashlight mounted on. Would the stocks rails interfere? Please let me know thanks

[HustlePaintball]

@613inferno We have tried this exact configuration and the rails of the stock will collide with the Lapco offset.

[613inferno]

@HustlePaintball Thanks alot, do you think I would be able to cut some length off the stocks rails so that I could attach the stock but always leave it in the collapsed position?

[HustlePaintball]

@613inferno You could, but that would almost make the point in having a stock null and void. 

[THEJDMLIFE]

is this stock durable? my friend had on like this on his tippmann and it seemed real loose and flimsy, not stable no matter how much he tightened it. any suggestions?

[Neyghmr]

@THEJDMLIFE Yes, it is durable. Versus a solid stock it may feel flimsy because it is lighter and collapsible but does have the bracing that you'll need for your marker.

[jigzaw047]

do the sliding stocks fit the new 2011 model A5??

[HustlePaintball]

@jigzaw047 The sliding stocks all work well with the 2011 A5.

[uin014]

I got a new stock for my birthday can I take off the sliding stock?

[HustlePaintball]

@uin014 Yes, just remove the 2 pins where the stock attaches to the marker. The Metadyne stock will come with a replacement baseplate.

[bagofbones11]

Will it fit on the Tippmann A5 with RT because of the extra tube on the right side?

[HustlePaintball]

@bagofbones11 That will not interfere, it will work on the A5 response.

[Lucagupi]

it works with the new A5 tippmann?

[HustlePaintball]

@Lucagupi Yes, Tippmann did not change their stock design for the A5 with their new 2011 design.

[DaHalfAznPaintballer]

well, when i bought my sliding stock, it came with no small bolt so i ahd to make one.... out of a pencil crayon!!!!. And it works fine tho

considering i bought it on employee pricing

[Final7Wrath]

Holy crap...she said couple of taps

[outcomes13]

i have this stock and dont use a remote line and it doesnt bother me at all

[SolidWater0]

but with the tank just right there it wont be confortable.

[Keyholder79]

if i had to hammer that stock pin like that...I'll wonder how would i get it out when i need to clean up my gun.

[asnmonkey6969]

@Keyholder79 Probably with a punch tool and hammer. I would be hesistant of a stock that requires a hammer for installation though.

[xochiquetzal121]

wow!!! this isthe way to go ... Have a question though can I oil my A-5 with oil gun? I reallydon't want to screw ot up

[HustlePaintball]

@xochiquetzal121 No you can't, use paintball oil only.

[asnmonkey6969]

@HustlePaintball Tippmann recommends Hoppes 9 Gun oil. Hoppes 9 gun oil is included in parts kits as well as new Tippmann markers in the oil packets. The key is to use an oil that does not include solvents of any kind.

Paintball oil and Pneumatic tool oil will also work.

[cadw600]

@asnmonkey6969 awesome i just stripped clean my marker and used hoppes 9 gun oil and then that comment up there had me trippen. "NO, USE PAINTBALL OIL" psh gun oil works just the same. thanks for this confirmation.

[HildrethSupplyCo]

@HustlePaintball I prefer gun oil, in my opinion it makes every thing easy glide.

[cadw600]

@HildrethSupplyCo whats the difference between paintball oil and gun oil? i just stripped cleaned my marker and used gun oil.

[UltimateEnd0]

My metadyne sliding stock blocks the rear bolt from cocking all the way in my A-5. What gives?! Help me out :(

[HustlePaintball]

Make sure that you have your spring guide in your main spring, and everything is re-assembled correctly. You might want to clean and oil up your internals lightly as well.

[dynamoguy187]

woah she totally scared me with the hammer!!

[guarddog57]

will that fit on the tippmann x7 phenom?

[HustlePaintball]

No, but this one will - search for "Metadyne MP5 Sliding Paintball Stock for the Tippmann X7 Review"

[HustlePaintball]

It's a sick stock, no doubt!

[theCJINATOR]

5 stars

[13ertMan]

how difficult is it to uninstall after hammering the bolt in?

[HustlePaintball]

Not difficult at all - Just hit the pin out w/ a hammer (use a punch or screwdriver, and hit it with the hammer to drive that pin back out)

[mxp67]

2nd. what is that 7th vid today

[xBNxDeViLDoG]

NIce vid 5 stars. And FIRST