can i only use Meguiars #205 with Flex 3401 Orbital and white pad Lake Country for remove low swirls and low holograms of a new paint in a black car???
@DmeloCup this combination should work. If you are using the Meguiar's system, you would use the W8207 yellow polishing pad on either a DA or a rotary at 1200rpm's.
Cool . I actually just picked up some #80 Speed Glaze thinking that would be what I need. I have only very light swirls and some water spots. When would you use #80? Or can I use that instead of the 205? Meguiar's has so many products that seem to overlap for me.
I have a very "Novice" question. I've noticed that in many of the videos posted here, you tape off the sections that you are working. What is the purpose for that? Can you not do a section at a time and overlap your work?
ok i have deep scratches on the clear coat where it is white and is peeled off a little so the scratches relly look white but where the clear coat is scratched there is really good paint there what so i do should i sand use compound because i tried it with meguairs ultimate compound and that did nothing to the scratches but where the paints clear coat was off a it was all dull, it made it shiny, then i waxed it . What can i do or used please help me.
yes for best results you use M105 followed by M205....to complete only the hood on a vehicle may take between 15minutes to several hours....its depends on the contaminants and procedure decided upon to complete the job.
this makes me want my car to have some paint on it!!!hahahaha
VERY NICE!!!
mifan93 10 months ago
can u get polishing pad at mal-wart?
mctapout187 1 year ago
@mctapout187 if you're referring to wal-mart, I believe it depends on the individual wal-mart. You need to look for the W8207 polishing pad.
meguiarsasia 1 year ago
@meguiarsasia thanks :::::::::::}]]) OO..
mctapout187 1 year ago
@mctapout187 ull not find this at wal mart
hotzone84 11 months ago
nice!
sirfartsalotube 1 year ago
Where can i buy the m205 compound in singapore?
speedyspeedboy123456 1 year ago
@speedyspeedboy123456 you should buy it from our distributor, Hypercoat
meguiarsasia 11 months ago
how do you know when to apply more product onto the pad
1pinoys 1 year ago
@1pinoys when you move the pad and you see no product left behind the movement. you always want to wet buff....never letting it get dry.
meguiarsasia 1 year ago
does the W68 backing plate work for both the W4000 wool pad and the W8207 pad? or is it only the w8207
wcuber123 2 years ago
@wcuber123 it works on both, as well as the W7207, W8207 and W9207
meguiarsasia 2 years ago
can i only use Meguiars #205 with Flex 3401 Orbital and white pad Lake Country for remove low swirls and low holograms of a new paint in a black car???
Thank you!
DmeloCup 2 years ago
@DmeloCup this combination should work. If you are using the Meguiar's system, you would use the W8207 yellow polishing pad on either a DA or a rotary at 1200rpm's.
meguiarsasia 2 years ago
should you follow with a wax after that polish?
trencher7 2 years ago
yes
meguiarsasia 2 years ago
Cool . I actually just picked up some #80 Speed Glaze thinking that would be what I need. I have only very light swirls and some water spots. When would you use #80? Or can I use that instead of the 205? Meguiar's has so many products that seem to overlap for me.
trencher7 2 years ago
205 cuts faster and leaves a finer finish and 80 has more oils.
meguiarsasia 2 years ago
I have a very "Novice" question. I've noticed that in many of the videos posted here, you tape off the sections that you are working. What is the purpose for that? Can you not do a section at a time and overlap your work?
Or is the tape just for demonstration purposes?
hometechnc 2 years ago
we use the tape simply to show the before and after for demonstration purposes.
meguiarsasia 2 years ago
ok i have deep scratches on the clear coat where it is white and is peeled off a little so the scratches relly look white but where the clear coat is scratched there is really good paint there what so i do should i sand use compound because i tried it with meguairs ultimate compound and that did nothing to the scratches but where the paints clear coat was off a it was all dull, it made it shiny, then i waxed it . What can i do or used please help me.
amarjot92 2 years ago
If I understand definitely it is above all necessary to cross M105 and then M205? How long to renovate a hood of medium size about?
erwans16 2 years ago
yes for best results you use M105 followed by M205....to complete only the hood on a vehicle may take between 15minutes to several hours....its depends on the contaminants and procedure decided upon to complete the job.
meguiarsasia 2 years ago
Comment removed
erwans16 2 years ago