RA TECH CO2 mag for Ksc & Kwa Glock series review

[raykupal]

i didn't know temperature is measured in centimeters.....

[cruisershooter]

My G18c is coming soon!!! (kwa)

[Tangibl3Fish]

Is piss of cake. Haha.

[gunexpert427]

do these work in kjw glocks?

[ndalman1]

@gunexpert427no bro i bought one for mine and it didnt work but luckily i also had a

ksc glock 17.

[ScArKiLLa45]

I bought one of these magazines from Evike, and it DOES NOT WORK.

[GloCas300]

Hi. Any one tray these on KJW Glock?

[carliper1]

its posible in a glock of Marui???? please respond me

[BadYellowSRT]

@angrymuffin123 yeah I know now. I posted a vid using my ATP and this mag. It works great. Had to mod the Oring seal a little but works like a charm.

[Omen4500]

What about the extended magazine for the glock 18c?

[BadYellowSRT]

Has anyone tried this in the ATP?

[angrymuffin123]

@BadYellowSRT it works

[csmybuttt]

Damn that thing must be loud. The camera can't even pick up the sounds properly.

[jamesward88]

I have one of these and it doesn't seem to let enough co2 out to even cycle the slide properly? Any idea's?

[tolafar]

after 1 year, i dare asking again!

Have you considered making these co2 mags for the kwa usp ?

(could you please ! )



[gazrayt]

@tolafar USP MAGS PLEASE.....PRETTY PLEASE!!

[ASMAZNASNERD]

r there 50 rd mags for this

[ASMAZNASNERD]

127 rds holy fricken shiz

[ASMAZNASNERD]

iss pieze of ceike

[alfaturboV6]

I cant believe how many rounds you fired from one canister!! Damn.

I want one for my KSC G34!!!!!

[alfaturboV6]

What a great idea! Do you have magazines for the TM g18c also?

Great video!!

[jtg199]

are these safe for my ksc glock 19 plastic slide?

[ScArKiLLa45]

Are these still available to buy? I checked WGC Shop but they don't have them anymore

[shadfrek]

Doesn't co2 break green gas guns?

[Barrett955]

i bought one of these and a ksc glock 18 c, when i loaded the mag and fired it, the loading muzzle broke, are there any stronger loading muzzles for the ksc glock 18 c?

[hello5893]

You need to make these for tokyo marui glocks as well. Make them for the fifty round mags along with the standard ones. Those would be awesome

[counterassasin]

You should make 49 rds long magazines aswell :D

And there is a big market for CO2 magazines for other guns as well, imagine if you made CO2 upgrade nozzle kits and magazines for TM Five-Seven, MK-23, Sig Sauer P226 etc etc... I would be broke :p

[groundpounder247]

is it at all possible that these are compatible with the KJW Glocks?

[00gbal]

is the back of the mag open??

[felon7]

i have bought 2 of these but 1 is broken , after the mag arrived i did place the co2 cartrige in , and after i fittet the screw ,the gas did blow out from the red rubber on the mag , it seems like the valve doesnt hold the gas back , i have changed the valve with 1 from a ra-tech mag that works and the error still remains...... i think my mag has some construction error...

[johnnyboy4uz]

Revolutionary?!!!

[MikeMetsFan97]

this is making me think of getting the KWA Glock since I like CO2 way better than green gas

[SoCalAirs0ft]

Very nice, can't wait till I get one of these mags, and a KSC G17.

[TCFamas]

Cool stuff! but Degrees of centimeter ROFLMAO Celsius would had been the right word ;)

[jdmcrazyboi]

will these fit for tokyo marui? g 26?

[kyleksesnipey]

hi yes i currently have a g18c by ksc , i am having trouble finding this on other site besides evike and they r already out of stock please respond where i could kindly purchase 1 of these

[AREMCD08]

u guys are awesome i was looking for a glock co2 mag finally

[AgentLinkDark]

YOU MUST MAKE EXTENDED MAG VERSION NAO !!!!!!!!!!!!!!!!!!!!

also where can i buy them in canada?

[dmiesterwzere06]

can the gas nozzles inside the KSC glock handle CO2? Are they reinforced? If not im worried they will break after a few magazines.

[NinjasAprentice]

I'm counfused is it for the gas bb glock?

[nbcaznmaster]

I got one of these and they are very good with the exception of poor fitting on my ksc g18c. There is alot of wobble between the mag and this causes improper sealing so the co2 leaks out and sometimes I don't get a full cycle. I have to hold it tightly and press upwards into the gun to ensure a proper seal. This is just my experience and it could be i just got a lemon.

[oneonesevenspwn]

@nbcaznmaster You need a metal magazine catch. It's the magazine catch that is worn down.

[derseuffer]

Where I can buy one of These?

Can you send me the Link?

[modernflyboy]

@derseuffer people on youtube are so incompetent these days.

[kevin5663]

請問 KSC 19可直上嗎?多少錢?

[zebracherub]

hi i dont understnd eglish very well but... your mag, you put a Co2 cartridge on it, you put the mag in a GBB (not Co2 gun) gun, and it fires ? thanks

[modernflyboy]

@zebracherub yes

[zebracherub]

@modernflyboy wow so cool

[Saimon310]

Заебись! Буду брать. )))

[doubleback55]

To the people that are talking about. That the co2 will blow up the ksc gun.

I assume that he's saying to only use co2 mag in cold weather not warm weather.

at 12C it's show 100 meters per second or 330 FPS.

[whatevers0n]

are you going to make a high cap version?

[legoguy69]

any upgrades required?

[xLynahx]

please, please make these for the KSC USP series!!! mainly the tactical! i live in America and it gets pretty cold. my USP cannot even get a single shot off in 0 degrees celcius.

[sexwaffles]

Won't that break the chassis?

[TheHekaa]

I have ordered g19 mag for my kwa g18c will it work in it?

[jturley128]

will these mags fit the tm glock 18, or the army armament r17?

[cheezday]

Are you going to make one for TM's Desert Eagle???

[FuckOff907]

srry to my post below, i meant the increased stress of the co2. typo.

[FuckOff907]

but ratech5915, green gas is not as powerful as co2, and so putting co2 in a gun that was originially designed for green gas could possibly damage it over time because of the increased stress of the green gas. how can u explain that this will not happen? i was actually going to buy one but im worried that the glock cannot sustain the co2, it wasnt made for it. thank you.

[EUBG]

@FuckOff907

You need to upgrade, like always. : )

[bulldogcronic721]

where can i get the co2 ones????

[oneonesevenspwn]

Holy snap! I counted 131 rounds, plus or minus a few. On one cartridge! Holy snap!!

[carltehkin]

Degrees Celsius not degrees centimeter ;) Also is there a cover for the back of the mags?

[carltehkin]

Degrees Celsius not degrees centimeter ;)

[benoit6342]

those magazines are compatible with the tokyo marui G18C ??? or if it's not, will you make some ?

[Zapateur]

@benoit6342 I wouldn't suggest you use CO2 on a replica not prepared for high pressure.

[counterassasin]

CO2 mag for Marui Glock series would be great, as would KSC MP7 mags =)

[Airblazer]

any chance the mags are compatible with the TM G18C?

Looks like KSC no longer make the Glock series due to copyright issues so seems strange to release a magazine for a gun that's no longer made...

Plus..any chance of a KSC M9 System 7 version? :)

[giodude111]

were can i find these how much are they

[C0114t3r41]

A mag for the hi-capa series would be nice :)

[Kilo646]

Will you be making these CO2 mags for the USP series?

Thanks

[ratech5915]

@Kilo646 may be



[bolingersa]

@Kilo646 You are totally thinking like I am!!!

[ClearCollector01]

Where can I get one?

[ClearCollector01]

Where can I get one?

[ratech5915]

@ClearCollector01 wgc

[darkdante786]

YOU MUST MAKE THESE FOR THE KSC MP7 I WOULD BUY THEM INSTANTLY =like buying a peice of cake !

[ratech5915]

@darkdante786 haha

[GrayArcAirsoft]

@ratech5915

Yes please make them for the MP7!

[azuremain]

No, it's a walk in the park. LOL

[ARX7ARBALESTZ7]

my KWA G23F's loading nozzle will not return to the regular position, instead it gets stuck forward. do i need a new loading nozzle or bucking or both?

[EDSKaR]

@ARX7ARBALESTZ7 First I'd recomend a good clean of your gun, If that dosen't sort the problem its probably a broken/warped piston head getting caught on the nozzle as it comes back.

Also check the nozzle springs, they often fail.

More importantly, get someone to look at it if you don't know how to dissasemble it. You could do more damage than good.

[ratech5915]

@ARX7ARBALESTZ7 bucking first

[25877852]

AHHH! So there is no difference between green gas guns and co2 guns?

It's only the mag??

[johnboyire]

what modifications are needed for the glocks to stop them blowing up>

[SonicSigs]

Thats amazing ra tech, you should defnately make your own version of the wa m4 co2 magazine, the ghk one isnt that good, i mean plastic feed lips! and 1 bulb per fill of bb's, not so good

[phantomwarrior17]

@SonicSigs You do know how much less gas a pistol uses to cycle and metal feed lips can damage bb's.

[RUSHER2]

@SonicSigs GHK/RA TECH pactically the same company in many ways.

[MrMonkekekeMan]

@RUSHER2 what are you talking about?

[ratech5915]

@MrMonkekekeMan 

[ratech5915]

@MrMonkekekeMan talking about english

[kullwarrior]

Will this be move into USP system as well? Jet Funnel and regular magazine.

Also PLEASE use hex key (4mm+) for breaking CO2. Hex is alot easier to use with allen key, it's also less likely to strip

[Am4h8]

@kullwarrior uhhh hex key=allen key, dunno what you're smoking

[kullwarrior]

@Am4h8 They're using flat heads.

[ratech5915]

@kullwarrior it can't be used for USP system

[kullwarrior]

@ratech5915 I'm asking if you guys will make a CO2 USP mag? USP .45 mag and USP .45 Match mag.

[Am4h8]

@kullwarrior oh misread, I though you said hex key alot easier to use *than* allen key

[MrBeaverwarrior]

@MrMonkekeMan kwa was sued for putting a glock trade on the weapon line and box i havent seen them for sale in years

[MrMonkekekeMan]

@MrBeaverwarrior wrong KWA was never sued. They were asked "politely" to stop importing them to the US. That is all. anyone outside of the US can still buy them.

[MrBeaverwarrior]

@MrMonkekekeMan sorry im from the us and all we here is no they were sued. you cannot get them here

[MrMonkekekeMan]

@MrBeaverwarrior im from the US too. But if you check KWA's forum you can find an explanation

[TheNewJerseyGhost]

that mag is awsome!!! are you going to make a co2 mag for the kwa m9 ptp? if not I will just get a glock!

[SugarFreeTargets]

KWA is making glocks again?

[MrMonkekekeMan]

@SugarFreeTargets they have always been making them

[MrBeaverwarrior]

these glocks are illegal

[MrMonkekekeMan]

@MrBeaverwarrior false. These are not illegal anywhere in the world.

[rusTORK]

What about Marui version? 8)

RA-Tech is the best. As allways!

[ratech5915]

yes we will made long version co2 mags for glock 18 and FPG.

[oneonesevenspwn]

@ratech5915 Thank god! I would buy those! Any due date?

[oneonesevenspwn]

@ratech5915 For the long magazines, is there a due date for them or an expectancy? Like, coming this summer?

[p8ntballer8491]

Very nice.

Will there be 50rd mag for the Glock 18?

[arronfoster17]

its piece of cake ,

love it Lol

[ratech5915]

@arronfoster17 HAHA