@MrDaniangel99 If you look at it directly yes. It can damage your eyes. Companies usually put a sticker next to the laser saying "Causion: Do not look directly into the laser, serious eye damage can occur"
@030di3go030 i just bought a ps2 slim... works really well, no humming noise like the fat ps2. if you post a vid of it i might be able to help, i temporarily fixed my 8 year old fat ps2 a while ago...maybe i can help.
for some reason my laser stop working and i use my finger nail to poke dat the laser where it shines and then and get a deep breath and blow on it and starts work ing again (mys is a slim and use almost about 2 years i think is getting old)
This video is really old, the original poster will never read this, so anyone with same issue in the video. The answer is the small screw on the laser near the bottom of the video on top of the metal rod. It needs to be loosened using small flathead or t-10 or smaller. The ribbon cable isn't adjusting freely for alignment hence it is stuck. - Hope this helps someone.
you could try to open the the lens and clean the inside lens. the same thing happened to me and then i did that and the CD started spinning but still didnt work, i am trying to see what the problem is to fix it. if i find the problem and i am able to fix it then i maybe putting a video on how to fix that problem with out spending any money.( be careful not to damage your lens because then you will be fucked)
I just put a brand new laser in mine this morning version 4, I get exactly the same laser only flashes once, it goes up and down, but the disc doesn't spin, any ideas on that one
I work on PS2's all the time, so I no longer have this exact ps2. But now that I look at the clip, I would guess if the unit wasn't modified in any way, it would just be the laser. I can't tell for certain though.
Well...I opened her up a little further. And someone attempted to do the romeo mod on this unit. I took the mod off and put the LA chip back directly to the board. No disc spins now. Laser moves though. I'm guessing the LA chip is shot.
Is the Laser dangerous?
MrDaniangel99 1 year ago
@MrDaniangel99 If you look at it directly yes. It can damage your eyes. Companies usually put a sticker next to the laser saying "Causion: Do not look directly into the laser, serious eye damage can occur"
SOF006 7 months ago
no dare open ==
PinkMerr 1 year ago
thats wat minesd does wen it turns on it makes a kinda grumbly noise
Brinky720 1 year ago
im having the same problem, laser not moving. anyone know how to fix this? im getting the no data message as well.
Googlyeyes77 1 year ago
@Googlyeyes77 i have it to with my ps2 slim *laser not moving*
030di3go030 1 year ago
@030di3go030 i just bought a ps2 slim... works really well, no humming noise like the fat ps2. if you post a vid of it i might be able to help, i temporarily fixed my 8 year old fat ps2 a while ago...maybe i can help.
Googlyeyes77 1 year ago
for some reason my laser stop working and i use my finger nail to poke dat the laser where it shines and then and get a deep breath and blow on it and starts work ing again (mys is a slim and use almost about 2 years i think is getting old)
nightmare6611 2 years ago
This video is really old, the original poster will never read this, so anyone with same issue in the video. The answer is the small screw on the laser near the bottom of the video on top of the metal rod. It needs to be loosened using small flathead or t-10 or smaller. The ribbon cable isn't adjusting freely for alignment hence it is stuck. - Hope this helps someone.
bluntslide42 2 years ago
The original poster is still around. :) This video was the result of a bad mod chip install.
buffguy1184 2 years ago
get a new laser, dus it read dvds and ps1 games?
mcrosco1 2 years ago
you could try to open the the lens and clean the inside lens. the same thing happened to me and then i did that and the CD started spinning but still didnt work, i am trying to see what the problem is to fix it. if i find the problem and i am able to fix it then i maybe putting a video on how to fix that problem with out spending any money.( be careful not to damage your lens because then you will be fucked)
Mistabeiko 2 years ago
replace the entire drive or better yet get a new ps2 or a ps3
coondogtheman1234 2 years ago
lol
i like how you said "its pretty god damn damaged"
lol
beatboxing0607 2 years ago
I just put a brand new laser in mine this morning version 4, I get exactly the same laser only flashes once, it goes up and down, but the disc doesn't spin, any ideas on that one
MRWHITE3535 2 years ago
my ps2 lens doesnt emmit red beams .whats the solution. please reply as soon as possible
devilmaycryghj 2 years ago
replas the lens or thie lens mite be luse so cheke that out
hamured 2 years ago
man ps2aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Blubenz320 3 years ago
replace your lens dude
malintha6 3 years ago
Mine does the same but my laser comes out of plastic shell and scratches my games
savoth91 3 years ago
check the ribbon cables for the drive on the motherboard when I changed my laser I had the same issue found out that
ribbon cables were loose
BRTaco 3 years ago
i have the same problem and dont know wnat to do
vasilisaerox 3 years ago
time to get a ps3
RaggaRasta 3 years ago 6
I work on PS2's all the time, so I no longer have this exact ps2. But now that I look at the clip, I would guess if the unit wasn't modified in any way, it would just be the laser. I can't tell for certain though.
buffguy1184 3 years ago
Pretty god damn damaged
rockbandguy88 3 years ago 6
@rockbandguy88
Gay
theuglyratman 1 year ago
yup...i have the same problem as u...cuz none of my games can play...since the laser never moves up & down to read the data....
YH2Z 3 years ago
I have the same proplem
spazman64 3 years ago
Can someone answer please, I have the same problem!
H2SO3F 3 years ago
Its a gamecube!
hnhme 3 years ago
This has been flagged as spam show
This really works!
1Cover your mouth with your hands
2In your hands make a wish
2Post dis comment on three more videos
4And tomorrow is the best day of your life
Gattereau 3 years ago
i have same problem..
terssi12 3 years ago
Well...I opened her up a little further. And someone attempted to do the romeo mod on this unit. I took the mod off and put the LA chip back directly to the board. No disc spins now. Laser moves though. I'm guessing the LA chip is shot.
BartlettBuffGuy 4 years ago
Possiblity that the switch next to the spindle motor is not being touched by the laser lens do to the fact that the switch may be worn out?!
rac3445 4 years ago
Possiblity that the switch next to the spindle motor is not being touched by the laser maybe the switch is worn?
rac3445 4 years ago
Possbility that the switch that the laser has to touch next to the spindle motor is worn?!
rac3445 4 years ago