SuperSix First Impressions

[rbass311]

wait PHEE why did you wait for 6 months? Is that why they call it the super six? :)

[phee303]

@rbass311 lol no, i think at the time dave was really backed up and on top of back orders he had production problems hahaha and it wasnt six months, it was nearly six months =] its still my choice of device til this day! thanks for the view and comment ^_^

[1dnk1]

ordered the new p18650 and asked for some vent holes near the bottom like on the supersix. The wait is killing me as well!!!

[phee303]

@1dnk1 awesome! although i dont think you'd need vent holes when dealing with protected 123As (especially if they're LiFpO4) but better than safe than sorry i guess =]

[Bcbud420]

good video , beauty device the only problem I have with the S6 is that it uses Cr2 batteries which SUCK I can only get 1 hour of constant use before they die on me and the 14500 is not that much better I have my eye on a 18650 Precise not as sexy looking but will last battery wise much longer .

[phee303]

@Bcbud420 thanks! my CR2s last about 4 hours before they underperform, seems like there isnt very good QC on the CR2s at all, people have so many different experiences with the CR2s; yeah the 18650 Precise would be an awesome device but i've given up enough meals for one superT device lol

[kvp120]

Phee its been a couple of days already! LOL

[PegRekab]

I'm waiting for one now. Hope there are some directions... I'm anxious to see you up and running with it. Reverse the spring maybe? Good job!

[phee303]

@PegRekab hahaha i've got it all worked out, check out the followup =]

[kvp120]

Phee are you going to post a follow up?

[phee303]

@kvp120 haha yes of course, it'll be in a few days =]

[phee303]

@kvp120 lol sorry, FFXIII and GoW3 has been taking up a lot of my time =P

[jrwreich]

Nice job dude. Got my shipping notification yesterday. First thing I'm going to do is put in two 14250 3.6v batteries (7.2) and slap on the 5.2 ohm High Volt atomizer. That should bring the vaping experience to a perfect 9 watts.

[phee303]

@jrwreich nice! i'd like to know how those 14250 work out! wow, 9w sounds like some madness hahaha even 7.2 is a bit high, thanks for the view and comment

[jrwreich]

@phee303 9 watts... not volts. 7.2 volts with a high volt atty will bring it down to 5.4 volts (have to check my math) which is 9 watts.

[phee303]

@jrwreich ahhh ic ic, got me confused for a sec there; i was all like 'how does his attys stay alive? maybe he means wattage' lol

[cha0tics0ul]

OMG i cant believe it took six months to get it! thats an insane wait. The supersix looks awesome. Vent holes are a good idea, but what happens if you accidently drop it in like a cup of water or something?

[phee303]

@cha0tics0ul hahaha yeah it did take forever but understandable, one guy fabricating a ton of them cant be easy. as for the dropping it in a cup of water, i dont thinq any PV is safe in water lol thanks for the view and comment!

[Smoke2Vape]

Do you like it?? :) hahhaha! :) Good to see you on cam again dude.

[phee303]

i'm really dig'n it! haha thanks!

[ChristenaCat]

The Super 6 comes with 2 spring fittings for the button, one is for 6v vaping the other is for 3.7v.

Its possible you have the 3.7v one already fitted, as it was with mine, making it correct for the 14500 battery, but too taught for the CR2.

[phee303]

thanks for the info and the view!

i'll have to take a closer look at the spring, but right after i had uploaded the video all i did was take out 2 washers and it seems to work pretty well =]

[ChristenaCat]

Yes, that would have the same effect as changing the spring over.

As you may have gathered, I just use mine at 3.7v.

But its one Super PV..

Hope you continue to enjoy it.. :=)

[phee303]

thanks for the view and comments but i'm not sure what you mean by 'autofire' lol did you mean ultrafire?

[BlueprintDK]

woooow Nice with the CR2 Autofire Batteries. In a Autofire Mod. Cant wait for the followup

[Werfed]

nice unpacking! that does look small (twss)

[phee303]

hahahaha

[strangerd4nger]

Sweet Phee, congrats on finally gettin your S6. Have you noticed any misfires since you messed with the washers?

[phee303]

thnk u thnk u. yeah, every once in a while it would misfire but it's not really that often

[strangerd4nger]

I'm just saying for how you paid for it should cure cancer, do barrel rolls, and not misfire! :D When I seen you putting in those CR2s, I think was the model, there wasn't much room for venting if they were to blow. Adding a faulty switch dude...just be careful. Robert (Detonator guy) had some just blow on him (no homo) and they burnt the crap outta his leg.

[phee303]

hahaha yeah the price is a bit steep.

there really isn't anything special about the mechanics of the switch, just a spring separated by plastic and when u press on the brass it connects the negative end of the battery to complete a circuit.

as for the CR2s blowing up yeah, the CR2s are hella snug in that case but supposedly the three vents that point down are supposed to help release pressure from the 'explosion' if the situation ever occurs, i'm not sure how effective that is but it is ther

[lueboy09]

Hahahaha "LOST" awesome

Dude the Super Six looks tight

[phee303]

thanks for the view and the comment =]

[ezvapr]

Holy Cow!!

[phee303]

holy cow! hahaha

[cizorz66]

nice vid looking forward to the follow up

[phee303]

thanks! it'll be comming in a week or two