what does a timing plate do if i replace my stock one will it harm my engine or do any damage cause I run a bone stock 06 banshee also what are some good inexpensive safe mods i'm getting pro circuits someday but until then...
@salam929 There is a ton of opinions on this. What ive experienced is faster throttle response and more torque. It will not do any damage but you should run premium fuel after installing it.
I would work on suspension mods before power mods. Banshee suspension is for crap.
i know it dont have nothing to do with this video. but my plastics are like sun faded from sitting outside i was wondering if you have any tips on painting them, what kind of paint, and should i sand it down i dont have no idea where to start so if u have some advise i would love to hear it thanx
@blockininyahood Buy plastic specific paint or paint that is plastic compatible. Scuff up the plastics with like some 800 grit wet/dry sandpaper. After that follow the painting application process in my "painting the explorer wheels" video. Buy an adhesion promoter, primer, paint, and clear coat. Hope this helps.
@blockininyahood Any autoparts store should carry everything you need. Duplicolor and Rustoleum are both good brand name paints. Either one should be fine.
@blockininyahood i just finished painting the plastics and they came out hot look like it came like it but i should have used a better clear coat cause the krylon sucks i dont like it, and i used dupli-color adhesion promotor it was the only one i can find but it seems like it works good but thanx im gona do the whole bike inlike two weeks and ill put a video up
what does a timing plate do if i replace my stock one will it harm my engine or do any damage cause I run a bone stock 06 banshee also what are some good inexpensive safe mods i'm getting pro circuits someday but until then...
salam929 2 months ago
@salam929 There is a ton of opinions on this. What ive experienced is faster throttle response and more torque. It will not do any damage but you should run premium fuel after installing it.
I would work on suspension mods before power mods. Banshee suspension is for crap.
jlsparky7 2 months ago
i know it dont have nothing to do with this video. but my plastics are like sun faded from sitting outside i was wondering if you have any tips on painting them, what kind of paint, and should i sand it down i dont have no idea where to start so if u have some advise i would love to hear it thanx
blockininyahood 6 months ago
@blockininyahood Buy plastic specific paint or paint that is plastic compatible. Scuff up the plastics with like some 800 grit wet/dry sandpaper. After that follow the painting application process in my "painting the explorer wheels" video. Buy an adhesion promoter, primer, paint, and clear coat. Hope this helps.
jlsparky7 6 months ago
@jlsparky7 ok thanx im gona do just that. what stores carry the adhesion promoter,and whats a good paint to use
blockininyahood 6 months ago
@blockininyahood Any autoparts store should carry everything you need. Duplicolor and Rustoleum are both good brand name paints. Either one should be fine.
jlsparky7 6 months ago
@blockininyahood i just finished painting the plastics and they came out hot look like it came like it but i should have used a better clear coat cause the krylon sucks i dont like it, and i used dupli-color adhesion promotor it was the only one i can find but it seems like it works good but thanx im gona do the whole bike inlike two weeks and ill put a video up
blockininyahood 5 months ago
nice this is a good cheap mod
chevy77rracer 6 months ago
@chevy77rracer Sure is! Free ponies.
jlsparky7 6 months ago
any finished vids?
quadracer1243 6 months ago
@quadracer1243 Not yet. Im still figuring out what parts I need and where im gunna get em from.
jlsparky7 6 months ago