Hi Friends,I am wendy,is there anyone in injection mold business? I come here to recommend our factory for the business opportunity sincerely.Tikon Mold is located in Shenzhen city, China with ISO 9001 certification. We have made lots of molds with DME and Hasco standard for our US and European customers for many years. Please email to me for further details: wendy4mold at hotmail dot com.
Well Randy i'm well acquainted with the swear world and industrial language as i've worked in factories, aircraft industry etc. etc where many people used those terms on a minute by minute basis. If people want to use terms like that then it's up to them, i just don't feel it's appropriate for a soldering tutorial on the net. There are lots of offensive words in the English language IMO that doesn't make it right to use them at inappropriate times.
@Gary1497 Good for you, maybe Youtube should clean up their act a bit, I started to watch this video and was shocked for a moment and I have an open mind....
@MrTomb789, Hi, I echo your thoughts entirely, i'm the same, pretty open minded about most things but the point is i think that there's a time and a place for things and using language like that in an instructional tutorial, well i just see no need for it and it is out of place, what's it proving? Thanks mate.
Good video, informative, but why even use language like that? what was the point? it's just stupid and there was no need for it. What were you thinking?
@Gary1497 The language he used was English. He used language like that because many people with Internet access speak English. It's really a pretty common language with many descriptive words and guess what? We are allowed to use them ALL! Pretty awesome, huh?
@randyfromm, Well if you say so. What has using language that many people find offensive got to do with a soldering tutorial? Also the fact that we have loads of words in the English language surely should mean we don't need to lower ourselves to this level? Your comment doesn't say much for you, frankly it's what i'd expect from an adolescent who's just discovered swear words.
This is "cappadelcappa's" art and he has every right to express himself as he wishes. Are you also offended when you see a nude painting or photograph? Do you sit down and write a letter to the artist saying "Good painting, but why don't you paint a house? Many people find paintings like yours offensive." Of course you don't. Clearly you're an intelligent fellow, Gary. I work with the English language as a professional editor. English is awesome. All words, all access.
It is also interesting that you feel my comment says little about me and is adolescent. An adolescent reply to you would have been "fuck you" or something like that. I presented a rational opinion to you in defense of the English language, one of many I speak and love. How do you figure that to be adolescent? Perhaps you have never been in the military service or worked in a shop full of manly men doing manly (non-adolescent) things. Intelligent, well-educated people use the word "fuck" as well.
FACEBOOK @samsunglcdtv168 LED TV LCD TV 3D TV BUFFER SAMSUNG TV LJ41-02760A LJ41-02761A LJ92-01202A LJ92-01203A STK795-820 STK795-821 SPI-50X3S240-2 SPI-50X3E120 YPPD-J015E YPPD-J016E YPPD-J015B SVI3205 SVI3206 MUR1620 2SC5200/2SA1943 2SD1047/2SB817 LCD samsung lcd tv Samsung lcd led tv lcd tv Samsung plasma tv lg lcd tv lcdtv what is lcd what is lcd tv tv lcd LEDLCD LCDLED LED LCD LCD LED
Stop using fucking swears, because fucking ass handy assholes like you or me will be fucking watching these fucking ass videos. Very fucking informative and fucking straight to the point.
@DerEchteBold Don't really care, I came online to learn this technique and happened upon a video that needs more finely tuned capabilities and lacks couth. This language is for a bar brawl, not an educational video.
@Superabound2 Think what you want, I like informative videos, not something that uses trashy language as a form of communication. The video was mediocre compared to the other one I found nonetheless, you can keep your profane video, I will stick with the more intellectual ones.
@MsLycanblood Look, im not saying youre not entitled to your own goddamn opinion, but shit, most people would just not watch the motherfucking video, instead of acting like a cuntass shitstack and cocking around telling other motherfuckers what they goddamn think about some stupid ass shit. And im smart as a motherfucker, but there aint shit that says an intellectual cant like some fucking profanity every now and again. Jesus Christ.
Great stuff I just made a balls of my tubescreamer trying to mod it. One prob was i lifted one of the pads, wasn't sure if I could scratch away the board like you demoed. So Thanks.
Hey man. Ever assemble a Velleman kit? Ever solder an "IC" on a Velleman kit? Ever noticed how close the copper "bubbles" are on a IC circuit? How in the hell can I solder all the leads without solder from one "bubble" getting onto the the next "bubble" which is just a hair's width away?
@hwy163 Might be a little late now (since it's been 3 weeks), but you can use flux, it will liquefy when you apply the soldering iron and it will separate the solder from the 2 solder pads on the board. Make sure your flux is either a grease like substance or a liquid flux. Make sure it's NOT corrosive.
Your title may turn off some viewers, especially if the they were academics. Fucking is better used to describe those at Washington bickering over debt limit on this day 25.07.11
This is a great video. I'm in school to become an electronics engineer and I've build plc programs, have created my own circuits and simulations of Johnson timers and such things like that. worked on pneumatics, but, i didn't know how to solder. now thanks to this guy, he made it so much easier. Thanks. Look for my videos soon guys on programming PLCs.
lol... That intro was perfect for my situation. I kept finding videos how to do this stuff to specific things and I felt... I just want to know how to fuckin solder and de-solder shit. I knew I came to the right place when I started this one.
Not only is 25W to small, but the tip is way too big. The copper wick does work, but makes a mess. In smaller areas it could cause bridges on the circuit board. The best way is to use a desoldering iron with a vacuum bulb. It gets all old solder!
4) the PCB shakes like hell after he removes the iron when soldering in the new part. The solder has to be absolutly still for a second or 2 to settle nicely....this is bad soldering. FIX the PCB or at least make sure it doesn't move like that when working on it...
3) ....and this is my MOST ignored tip....ADD a little NEW solder if the solderings are very old before trying to get the old solder/part out !!!
The old solder doesn't have any flux in it anymore so it can take AGES before the old solder starts running. Adding a tiny bit of new solder will make it run almost instantly. Only THEN try to get out all of the solder using a hand pump or desoldering braid.
2) He doesn't (and hasn't) pre-tinned his soldering tip. BEFORE starting to solder, put a little new tin on the tip, then wipe it off with a moist (not WHET) sponge. Even better is "flicking off" the excess tin, but that's only for the pro's
1) Lousy soldering iron. 25W is simply not enough. It will force you to heat parts for very long which can lead to damage of tracks and parts. It works kinda OK here because it's only a tiny resistor, I wouldn't want to do bigger parts like HVT's with it..
I watched this so I could apply for a job on Monday, and tell them I knew how to solder. Oh, and it's not pronounced with an "L". That was fucking helpful!
Nice tutorial my man. I just used what you taught me about how to solder and de-solder to repair a $1200 46" LCD HDTV with $30 in parts and tools and 2 and a half hours of my time. I humbly thank you for your instruction.
whats better? Cut the the wires before or after soldering... many people tell me before ,but i think its more confortable when i cut it after soldering... ^^
Or if you accidentally ripped a or fucked over a trace you can also hard wire it with a thin piece of wire. Whether it be a transistor, resistor or any other component that is a throught hole.
@SlimeTron5000 Only if the pump is bad. I have a self heated pump that actually pulls all the solder clean and the part you want to de-solder just comes off.
@SlimeTron5000 I've used both, and I prefer the pump, it always worked well for me. The wick is fine, but it has it's own issues as well, especially for noobs burning the board. <_<
@SlimeTron5000 Gaaah! Nevermind, I DID mean to respond to you, my vision is getting bad XD Still not sure what you meant though. Anyway, I like using the SUCKER :D
But don't disturb the joint until it's COMPLETELY cool, or the Popular Mechanics guy from the 'How to Solder' video will come and tear you a new asshole!
sweet dude thanks for the video, now im going to fuckin solder shit, im gunna solder my strings to my fret bord, im silly like that, just fuckin around lol
hey man im really interested in this as a career im 16 and want to know what tools to buy or the most important ones for diagnostics. like how did u know it was that capacitor?
dude i have the same soldering gun as you and when I put my wic on top of the solder i hold it there for a good fucking 7 minutes and it never melts the solder... wtf is going on?
I respectfully ask to please fix your opening title on the video! My 9 yr old and I were watching and I thought it would be safe to watch together w/out screening. I was wrong. I don't think it's appropriate to have the "F word" on the title screen of a soldering video! Now I have some explaining to do thanks to your carelessness.
Yep, I modded my TS-9 to the original TS-808 components. There are actually two different chips you can get...a JRC4558D or the rare TL4558P chip. The D chip sounds best to me. It fucking rocks!!! I put a socket in mine so I could easily change them to see which one I liked best and settled on the D chip.
Ugh. Finally a vid that actually shows how to solder. I was just about to go mad if this turned out to be yet another vid of some idiot babbling on and on about everything but soldering!! Thanks for the clear, concise tutorial.
one of the best tutorials i've seen on YT. thank you for NOT putting horrible techno music in the background, and instead, actually talking on a tutorial.
DUDE!!! Thanks for the tut. I am very new to soldering/desoldering and this has helped me quite a bit. I am trying to desolder a chip from an xbox360 mobo....
I accidentally used solder for integrated circuits on a switch, and now I can't get off enough solder to pull the broken switch off, I have dried a desoldering bulb, can someone help me?
@MIKEORELSE then you don't know shit what flux does, he prolly used rosin core solder which has flux in it. ask any pro, they will tell you need to use flux or rosin core solder to solder. i hope you fuck up your iron solder tip cuz i did without flux 3 times as a newb like you dumbfuck. then i got it right and it gets easier when using flux. shut your dumbass up, do research first, talk shit later bitch.
LMAO @ the title. on my pcb, it doesn't show which is positive or negative. Since this is my first project, I want to be very careful. I know which is which on the capacitor, but wanna know if I am installing right. In the circle where I removed the bad capacitors is a black side of the circle, and a yellow side(the color of the pcb side). Which side is + or -? And should I go + to + - to -?
Yes, you notice there is a range here. It is best to play around a little bit. Start at 330 and slowly go up until the solder melts quickly but doesn't "boil" away. There are different formulations of solder that have different melting points. How cold the room is, and what elevation you live at can make a difference too. Also, you should lock down your parts in some sort of clamps. You don't want the parts scooting away from you. That's how your iron slips and burns you or your case.
So if the solder touches any green parts or if the iron touches the green parts then I should be fine right? Just not more than 1 second or something?
@weerpool14 I loved the title because by the time I found this video I was thinking the same thing. " How to fucking solder and unsolder " I was like "hell yeah"
Another tip i use when soldering is i snip off the excess wire from the parts 'legs' before because cutting after can cause micro cracks in the joint.
Nice tips man, thanks!! WIN intro))
KISSAproductions 4 days ago
OHHH that HOT....HAHAHAHAHA -_- nice
mazter310 6 days ago
"Nippers" is an extremely technical term...
NullWaffles 1 week ago 3
i have soldered my shit.
madmanbehindye 2 weeks ago
THIS VIDEO WAS FUCKING helpful
thepauloapo 3 weeks ago 2
Thanks a fucking lot for this great tutorial
DesolateGrunt 3 weeks ago
U feel cool knowing u can curse ?
bosna916 4 weeks ago
@bosna916 yes
dawg1157 1 week ago
@wendy4mold Can The Chinese do it better or something?
Drpatrick777 1 month ago
ooh thats hot no way sherlock
SeanProductions1001 1 month ago 2
nice fucking intro and shit like that
simonson593 1 month ago
This video was very helpful. Thanks for getting straight to the point.
i3oodlei3ear 1 month ago
This has been flagged as spam show
Hi Friends,I am wendy,is there anyone in injection mold business? I come here to recommend our factory for the business opportunity sincerely.Tikon Mold is located in Shenzhen city, China with ISO 9001 certification. We have made lots of molds with DME and Hasco standard for our US and European customers for many years. Please email to me for further details: wendy4mold at hotmail dot com.
wendy4mold 2 months ago
The intro made me LOL so hard that I got a boner.
wojtuniakfrog 2 months ago
chank you!
lazymustache 2 months ago
Well FUCK, good fucken video. help me alot.
richyrich6666 2 months ago
Well Randy i'm well acquainted with the swear world and industrial language as i've worked in factories, aircraft industry etc. etc where many people used those terms on a minute by minute basis. If people want to use terms like that then it's up to them, i just don't feel it's appropriate for a soldering tutorial on the net. There are lots of offensive words in the English language IMO that doesn't make it right to use them at inappropriate times.
Gary1497 2 months ago
@Gary1497 Good for you, maybe Youtube should clean up their act a bit, I started to watch this video and was shocked for a moment and I have an open mind....
MrTomb789 2 months ago
@MrTomb789, Hi, I echo your thoughts entirely, i'm the same, pretty open minded about most things but the point is i think that there's a time and a place for things and using language like that in an instructional tutorial, well i just see no need for it and it is out of place, what's it proving? Thanks mate.
Gary1497 2 months ago
What's the watts on the hot iron?
Angelmods 2 months ago
Good video, informative, but why even use language like that? what was the point? it's just stupid and there was no need for it. What were you thinking?
Gary1497 2 months ago
Comment removed
randyfromm 2 months ago
@Gary1497 The language he used was English. He used language like that because many people with Internet access speak English. It's really a pretty common language with many descriptive words and guess what? We are allowed to use them ALL! Pretty awesome, huh?
randyfromm 2 months ago
@randyfromm, Well if you say so. What has using language that many people find offensive got to do with a soldering tutorial? Also the fact that we have loads of words in the English language surely should mean we don't need to lower ourselves to this level? Your comment doesn't say much for you, frankly it's what i'd expect from an adolescent who's just discovered swear words.
Gary1497 2 months ago
Comment removed
randyfromm 2 months ago
This is "cappadelcappa's" art and he has every right to express himself as he wishes. Are you also offended when you see a nude painting or photograph? Do you sit down and write a letter to the artist saying "Good painting, but why don't you paint a house? Many people find paintings like yours offensive." Of course you don't. Clearly you're an intelligent fellow, Gary. I work with the English language as a professional editor. English is awesome. All words, all access.
randyfromm 1 sec ago
randyfromm 2 months ago
It is also interesting that you feel my comment says little about me and is adolescent. An adolescent reply to you would have been "fuck you" or something like that. I presented a rational opinion to you in defense of the English language, one of many I speak and love. How do you figure that to be adolescent? Perhaps you have never been in the military service or worked in a shop full of manly men doing manly (non-adolescent) things. Intelligent, well-educated people use the word "fuck" as well.
randyfromm 2 months ago
You make it look easy. My irons must be fried.
MadSmokerBBQ 2 months ago
This has been flagged as spam show
MrDazelong 2 months ago
Thanks man,..... we need more videos and more ideas. Keep it up.
dramymagdy 3 months ago 2
Stop using fucking swears, because fucking ass handy assholes like you or me will be fucking watching these fucking ass videos. Very fucking informative and fucking straight to the point.
MMAinfussion 3 months ago
sir, i recommend you use less profanity in your videos. children may be watching.... and 34 sissies that can't handle such crudeness.
yourtube2456 3 months ago 3
if you're offended by it you should get a grip and feel your way back to reality
it's just not that important
DerEchteBold 3 months ago
Cool video but u use way to much fucking profanity!
CUSTOMLIFR 3 months ago
Thanks for the help! Now to solder some ps3 motherboard components. lol
classmassgrass 3 months ago 2
all the people talking shit probably cant solder for dear life good shit
fidosd9 3 months ago 2
" I can't watch the video cuz swearing is naughty and my mom said I can't swear"
soudersstryker 4 months ago
Was going to watch it, then he used profanity so I think it's trash. Not watching this.
MsLycanblood 4 months ago
@MsLycanblood
hahaha!
(sorry, i just had to laugh at you a little)
anyway
wish you well
DerEchteBold 4 months ago
@DerEchteBold Don't really care, I came online to learn this technique and happened upon a video that needs more finely tuned capabilities and lacks couth. This language is for a bar brawl, not an educational video.
MsLycanblood 3 months ago
@MsLycanblood well thats fucking stupid as shit
Superabound2 3 months ago
@Superabound2 Think what you want, I like informative videos, not something that uses trashy language as a form of communication. The video was mediocre compared to the other one I found nonetheless, you can keep your profane video, I will stick with the more intellectual ones.
MsLycanblood 3 months ago
@MsLycanblood Look, im not saying youre not entitled to your own goddamn opinion, but shit, most people would just not watch the motherfucking video, instead of acting like a cuntass shitstack and cocking around telling other motherfuckers what they goddamn think about some stupid ass shit. And im smart as a motherfucker, but there aint shit that says an intellectual cant like some fucking profanity every now and again. Jesus Christ.
Superabound2 3 months ago 2
thanks for posting... really helpful
jroyster 4 months ago
Great stuff I just made a balls of my tubescreamer trying to mod it. One prob was i lifted one of the pads, wasn't sure if I could scratch away the board like you demoed. So Thanks.
Hardcase77 4 months ago
Great fucking video and shit!
shizon101 4 months ago
Real good vid, that braid stuff looks very useful.
blackcountryme 4 months ago
Hey man. Ever assemble a Velleman kit? Ever solder an "IC" on a Velleman kit? Ever noticed how close the copper "bubbles" are on a IC circuit? How in the hell can I solder all the leads without solder from one "bubble" getting onto the the next "bubble" which is just a hair's width away?
hwy163 5 months ago
@hwy163 Bubbles?
Serostern 5 months ago
@hwy163 Might be a little late now (since it's been 3 weeks), but you can use flux, it will liquefy when you apply the soldering iron and it will separate the solder from the 2 solder pads on the board. Make sure your flux is either a grease like substance or a liquid flux. Make sure it's NOT corrosive.
ChineseProletariat 4 months ago
i dont wanna tear my customers pedal up but..
phillionto 5 months ago 3
+1 like just for the intro title wording "How to FUCKING solder & de-solder shit" ROFLMAO!!!!
garoad2 5 months ago 3
Good video bro thx a bunches
Onesickazmofo 5 months ago
very good video! ^_^
630NESS 5 months ago
how do you know which parts you have to change when ur petal stops working? theres like 30 pieces on that motherboard!
rootbeerdude96 5 months ago
Your title may turn off some viewers, especially if the they were academics. Fucking is better used to describe those at Washington bickering over debt limit on this day 25.07.11
josemour100 6 months ago
Definitely wouldn't want this guy modifying my pedals. He did a garbage job on this Tubescreamer.
mkellerdesign 6 months ago
This is a great video. I'm in school to become an electronics engineer and I've build plc programs, have created my own circuits and simulations of Johnson timers and such things like that. worked on pneumatics, but, i didn't know how to solder. now thanks to this guy, he made it so much easier. Thanks. Look for my videos soon guys on programming PLCs.
CptNes1987 6 months ago
great vid.
f0ckt 6 months ago
lol... That intro was perfect for my situation. I kept finding videos how to do this stuff to specific things and I felt... I just want to know how to fuckin solder and de-solder shit. I knew I came to the right place when I started this one.
FenixofWow 7 months ago 40
Or you just get a solder sucker, faster, cheaper, better.
Serostern 7 months ago
Not only is 25W to small, but the tip is way too big. The copper wick does work, but makes a mess. In smaller areas it could cause bridges on the circuit board. The best way is to use a desoldering iron with a vacuum bulb. It gets all old solder!
service1956 7 months ago
4) the PCB shakes like hell after he removes the iron when soldering in the new part. The solder has to be absolutly still for a second or 2 to settle nicely....this is bad soldering. FIX the PCB or at least make sure it doesn't move like that when working on it...
AtariAndre42 7 months ago
3) ....and this is my MOST ignored tip....ADD a little NEW solder if the solderings are very old before trying to get the old solder/part out !!!
The old solder doesn't have any flux in it anymore so it can take AGES before the old solder starts running. Adding a tiny bit of new solder will make it run almost instantly. Only THEN try to get out all of the solder using a hand pump or desoldering braid.
AtariAndre42 7 months ago
2) He doesn't (and hasn't) pre-tinned his soldering tip. BEFORE starting to solder, put a little new tin on the tip, then wipe it off with a moist (not WHET) sponge. Even better is "flicking off" the excess tin, but that's only for the pro's
AtariAndre42 7 months ago
1) Lousy soldering iron. 25W is simply not enough. It will force you to heat parts for very long which can lead to damage of tracks and parts. It works kinda OK here because it's only a tiny resistor, I wouldn't want to do bigger parts like HVT's with it..
AtariAndre42 7 months ago
Good video! Thanks
trevordg27 8 months ago
3:27 Let's take your nippers.
ForthConductor 8 months ago
now I know how to fucking desolder that crap
theguytube 8 months ago
No shit its hot you just heated that piece idiot
chordarrow1 8 months ago
nice intro
lizardwallet 8 months ago 75
Could I solder a Battery Holder to a PCB Board using the same process in this video at 2:02?
Riddler95 8 months ago
I watched this so I could apply for a job on Monday, and tell them I knew how to solder. Oh, and it's not pronounced with an "L". That was fucking helpful!
Clownspike77 8 months ago
2:42 thats what a joint looks like lol
darkarura1776 8 months ago
lol i gotta get some nippers i only have wire cutters... lol JUS PLAYING PEOPLE
Newny3karrotz 8 months ago
Fucking informative and the shit was clear as fuck.
norxcontacts 9 months ago
i had to mute this cause it kinda sounds illegal joint nippers etc...
iDannyHDx 9 months ago
what if I want to solder some rubber insulated coaxial cable?i tried heating the conductor but the rubber melts and it shorts the conductors
chorchy1st 9 months ago
Nice tutorial my man. I just used what you taught me about how to solder and de-solder to repair a $1200 46" LCD HDTV with $30 in parts and tools and 2 and a half hours of my time. I humbly thank you for your instruction.
cadeuseus 9 months ago
This was very fucking informative. Just what i fucking needed. thanks!
IAteYourTV 9 months ago
I gotta reheat my join *puff puff pass*
iHardStar 9 months ago
I love the fucking title man. Great tutorial on how to solder some fucking shit.
vangstaz 9 months ago
Fail eveyone knows how to desolder stuff
Le0nLucky 10 months ago
Cut the leads before soldering. The joint can get a fracture when you clip it off.
orteeze 10 months ago
I would have never known you needed a WICK to remove the soder.... Thanks
anubisringo 11 months ago
i bet it didnt work after
froy98 11 months ago
This has been flagged as spam show
Why do you call it SODDER
shellyfatarse 11 months ago
thx dude, needed to know this stuff
twisted2cj 11 months ago
Dude, the vid is really good but you must have gone to the same school as the dickhead from expert village - it's sOLder, not sarder!
BlackAndBluez 11 months ago
whats better? Cut the the wires before or after soldering... many people tell me before ,but i think its more confortable when i cut it after soldering... ^^
thaGkillah 1 year ago
Damn, Everyone is talking about joint theese days. Are you a drug dealer???
InwardScooters66 1 year ago
Or if you accidentally ripped a or fucked over a trace you can also hard wire it with a thin piece of wire. Whether it be a transistor, resistor or any other component that is a throught hole.
kskate91 1 year ago
By thumbs up, how many guitars watched this so they could, idk, switch the pickups?
hnaht321 1 year ago
Thanks for the Video, very straight to the point, and educational...... Great Work. Please Post more Videos on "how to's"
Tbomb187 1 year ago
Thanks for the example. Never seems to work as well for me as in your video, but it got me through resoldering some cold joints on my Kenwood deck.
TorquinDSL 1 year ago
"Ooo it's hot!" Just like me. Don't think some times. It's amazing how stupid I can get when just not thinking enough lol.
Clipster15 1 year ago
LOL'D SO HARD.
GarrettBMXes 1 year ago
Man, you say this pedal belongs to a client? And you scrapped a bit of the solder mask off? :|
cumesoftware 1 year ago
Guide? what guide? i don't use a guide when diagnosing faulty PCB's...
XTYNoLuck 1 year ago
Wow ... oxidised
Maximinators 1 year ago
like others said...the title really shocked me!! but thanks for the interesting and helpful video & tips.
so the braid/wick is a better alternative to a solder sucker? now i know what a wick is used for! lol
cheers!
GitXxxd 1 year ago
Hell ya! Thanks for the post. Now I can fix my own shit.
LetsLiveItUp2010 1 year ago
That iron doesn't look very clean...
Tda7000 1 year ago
When it comes to desoldering, I prefer a desolder pump, that just sucks the solder right off.
CoolDudeClem 1 year ago
@CoolDudeClem braid is better.....pumps dont SUCK ANYTHING.
SlimeTron5000 1 year ago 2
@SlimeTron5000 Only if the pump is bad. I have a self heated pump that actually pulls all the solder clean and the part you want to de-solder just comes off.
cumesoftware 1 year ago
@SlimeTron5000 I've used both, and I prefer the pump, it always worked well for me. The wick is fine, but it has it's own issues as well, especially for noobs burning the board. <_<
Grayhatt 9 months ago
@Grayhatt It's okay, you don't need have to tell me you're a clone. ;-)
SlimeTron5000 9 months ago
@SlimeTron5000 lol
Grayhatt 9 months ago
Wait a minute, that's strange, I didn't respond to you, I meant to respond to Cumesoftware. And clone?
Grayhatt 9 months ago
@SlimeTron5000 Gaaah! Nevermind, I DID mean to respond to you, my vision is getting bad XD Still not sure what you meant though. Anyway, I like using the SUCKER :D
Grayhatt 9 months ago
kind of is new
TheMacSecrets 1 year ago
LMAO. the title of your video is full of win. hahaha
crnrdfox 1 year ago
LOL Fuckin
BloodyiBall0 1 year ago
But don't disturb the joint until it's COMPLETELY cool, or the Popular Mechanics guy from the 'How to Solder' video will come and tear you a new asshole!
imcustomized 1 year ago 42
Your soldering tip is extremely oxidised and you must use flux with your braid.
FearTriX 1 year ago
sweet dude thanks for the video, now im going to fuckin solder shit, im gunna solder my strings to my fret bord, im silly like that, just fuckin around lol
espltdm251playa 1 year ago
hey man im really interested in this as a career im 16 and want to know what tools to buy or the most important ones for diagnostics. like how did u know it was that capacitor?
bluntza 1 year ago
ohhh he said fucking thats original he must be a try badass
Ethan098766 1 year ago
Solid tutorial, thanks!
kshcsuf 1 year ago
I totally love the title.
SeanDeigh13 1 year ago
FCCN SOBITCH !!!!! I WAS TRYING TO DESOLDER WITHOUT ANY SOLDER REMOVER WICK OR VACUMM SODER.. U MADE IT LOOK SO EASY AND PRO. THNX
BONNIExANDxCHUY 1 year ago
dude i have the same soldering gun as you and when I put my wic on top of the solder i hold it there for a good fucking 7 minutes and it never melts the solder... wtf is going on?
RejectedManiac 1 year ago
LOL i love your title screen
hagfelsh 1 year ago
HOW TO FUCKING
SP420 1 year ago
its better to put solder on iron first.
xxdominatorzz 1 year ago
i noticed you didn't pre-tin your soldering iron. Is it just because your pro, or is pretinning unnecessary?
aleznander 1 year ago
I respectfully ask to please fix your opening title on the video! My 9 yr old and I were watching and I thought it would be safe to watch together w/out screening. I was wrong. I don't think it's appropriate to have the "F word" on the title screen of a soldering video! Now I have some explaining to do thanks to your carelessness.
eterlizzi 1 year ago
Yep, I modded my TS-9 to the original TS-808 components. There are actually two different chips you can get...a JRC4558D or the rare TL4558P chip. The D chip sounds best to me. It fucking rocks!!! I put a socket in mine so I could easily change them to see which one I liked best and settled on the D chip.
SloppyGoat 1 year ago
use your guide? yeah if u don't understand how the circuit works...
anyway u sholuldn't start desoldering...anything...
it's just an ideea, not judging no one.
XTYNoLuck 1 year ago
foot pedal!~ you can use that to go "WAAAHHH WAAAAH WAHAHAHABOOM!!!!"
iamextremelyawesome 1 year ago
i lawled wen he burned himself...
18SIN18 1 year ago
interesting fucking shit n stuff on fucking soldering lol..
100roberthenry 1 year ago
Ugh. Finally a vid that actually shows how to solder. I was just about to go mad if this turned out to be yet another vid of some idiot babbling on and on about everything but soldering!! Thanks for the clear, concise tutorial.
LaMisereHQ 1 year ago
one of the best tutorials i've seen on YT. thank you for NOT putting horrible techno music in the background, and instead, actually talking on a tutorial.
Ryinstyles 1 year ago
DUDE!!! Thanks for the tut. I am very new to soldering/desoldering and this has helped me quite a bit. I am trying to desolder a chip from an xbox360 mobo....
GAMERx4xJC 1 year ago
i thought you had to cut it then solder it
mangoleeallan 1 year ago
Thanks man. I blew a capacitor on my DS-1 and i have surprisingly found the same capacitor in a Modem.
General1lol 1 year ago
uh thats hot, he he he he ¡¡¡¡
korgertube 1 year ago
And that's how you fucking desolder shit.
ManOnToilet 1 year ago
LOL. I LOVE THE AGGRESSIVE TITLE. SHIT. ROFL LMAO
a380rockerfan 1 year ago
great fucking tutorial
movieb0yreturns 1 year ago
FUCK YEAH THANK YOU.
I NEED TO FUCKING DESOLDER SOME SHIT AND THIS SHIT HELPED ME.
(I searched "HOW TO FUCKING DESOLDER SHIT" in google ant this came up.
MIKEORELSE 1 year ago
I accidentally used solder for integrated circuits on a switch, and now I can't get off enough solder to pull the broken switch off, I have dried a desoldering bulb, can someone help me?
supergenius1994 1 year ago
thanks. now I know how to fucking desolder and fucking solder these fucking capacitors to this fucking Boss DS-1 pedal..and shit
PhuckHue2 1 year ago
thanks!
whiteballoonsin1978 1 year ago
where's the fucking flux? that's not how you fucking solder you fucking moron.
texican512 1 year ago
@texican512 Suck my dick you don't need flux if you're not some fucking pussy baby motherfucker.
MIKEORELSE 1 year ago
@MIKEORELSE then you don't know shit what flux does, he prolly used rosin core solder which has flux in it. ask any pro, they will tell you need to use flux or rosin core solder to solder. i hope you fuck up your iron solder tip cuz i did without flux 3 times as a newb like you dumbfuck. then i got it right and it gets easier when using flux. shut your dumbass up, do research first, talk shit later bitch.
texican512 1 year ago
Great tutorial! I was wondering if a 15 watt iron would work for this? Thanks!!
Tntstew 1 year ago
good
thanks
anupamvipul233 1 year ago
can i buy the desoldering braid at home depot as well?
TheDegree777 1 year ago
this is imature but, i busted up laughing when i read: "HOW TO FUCKING solder and de solder shit" ROMFFLMMFAO
corey240bpm 1 year ago
and you forgot to say he didnt clean it so now there is corrosive flux residue inside the part that will reduce the life of the part
xxcowslayerxxx 1 year ago
whats the best cleaner? just plain ole isopropyl alcohol?
PhuckHue2 1 year ago
you need to read the cleaning instructions on the solder itself it is different for all solders usually warm water or alcohol
xxcowslayerxxx 1 year ago
This has been flagged as spam show
LMAO @ the title. on my pcb, it doesn't show which is positive or negative. Since this is my first project, I want to be very careful. I know which is which on the capacitor, but wanna know if I am installing right. In the circle where I removed the bad capacitors is a black side of the circle, and a yellow side(the color of the pcb side). Which side is + or -? And should I go + to + - to -?
knockout1981pro 1 year ago
your tip is very dirty..
you didnt clean the joints..
you didnt apply a small dab of flux to prevent oxidation..
you cut the extra off before you solder to prevent cracking the weld apart when you trim it..
((rolls eyes))
Corey497 1 year ago
Comment removed
Corey497 1 year ago
Also, what temperature should I be soldering at?
614harmony 2 years ago
Higher than the melting point of the solder. Usually 450 degrees and up.
Tokkemon 2 years ago
Most soldering stations do have a celcius reading. In celcius, 330-375 is a good choice.
XmasWithSharkey 1 year ago
Yes, you notice there is a range here. It is best to play around a little bit. Start at 330 and slowly go up until the solder melts quickly but doesn't "boil" away. There are different formulations of solder that have different melting points. How cold the room is, and what elevation you live at can make a difference too. Also, you should lock down your parts in some sort of clamps. You don't want the parts scooting away from you. That's how your iron slips and burns you or your case.
Shakespeare1612 1 year ago
OVER 9000
what else??
zeroni13 1 year ago
So if the solder touches any green parts or if the iron touches the green parts then I should be fine right? Just not more than 1 second or something?
614harmony 2 years ago
I have a similar question. I need to touch up a bad solder, and I'm wondering if if I should just try to remelt, or add more solder.
Polarcupcheck 2 years ago
Yes, just don't hold the iron there or else it *may* melt the board depending on how hot it is.
Tokkemon 2 years ago
Thanks for taking the time to post. I found it very helpful.
GTOGreg 2 years ago 5
Great video. Exactly what I was looking for.
eragoncp14 2 years ago
great vid thanks man awsome title
HOUSTONSCHILD 2 years ago
This comment has received too many negative votes show
there is no such thing as desolder wire dumbass
1gun45 2 years ago
The title put me off at first but it turned out to be the best tutorial period. Great stuff man! Fucking thanks and shit
weerpool14 2 years ago 41
@weerpool14 I loved the title because by the time I found this video I was thinking the same thing. " How to fucking solder and unsolder " I was like "hell yeah"
ColdGripHandle 1 year ago
Another tip i use when soldering is i snip off the excess wire from the parts 'legs' before because cutting after can cause micro cracks in the joint.
mattswinn 2 years ago
5 stars. Any idea where i can find the desolder wire???
halfmumi 2 years ago
desoldering braid radioshack
Shadowlink13 2 years ago
HAHAHA. title was hilarious! and i have that same iron!
guitarristachileno 2 years ago
Where is good place to buy wick?
BackFlash2K 2 years ago
now if the wick dose not get all the solder out and leves some left to were its between the holes and the bourd how do you dail with that
jerbar120 2 years ago
use a new piece of wick, add some solder to the back of the wick whilst on top of the hole and it will suck it up...
cappadelcappa 2 years ago
@jerbar120 that happens to me a lot. I grab the part on the other side with needle nose pliers (left hand) and