1937 GMC Truck RAT ROD FROM INSIDE

[6inlinemat]

The power that you guys can take on a chevy 302 in line 6 is drawn from 1500HP?

[JcXtreme72]

Same engine that came in my Pop's '66 GMC. It's still in there and it still running. Damn thing is a street legal tractor. Others might not get it but that's an awesome engine. No it's now a small block but on the bright side it isn't a small block. It's different has the same torque and better mileage.

[Farout397]

Very cool man. That 235 keeps it very unique.

[lumberjak5010]

Love the 235! Great old engine, reliable and tough....even cheap if you hunt hard enough... nice rig!!

[ratrodramblin]

I'm going to be picking up my '72 250 in a day. I hope what I build will be sounding as fine and this inline.

[I3eta]

Where is the car? I can only see a pile of trash.

[ratrodramblin]

@I3eta what do you drive? your mom's vw golf?

[mowrman100]

Dude's right - looks cool but if ya don't run airfilters then ya don't really love it...

[GreenMagic89]

I LOVE this song!!!! keep it STRAIGHT!!

[shartne]

Sounds great

[sardosfish]

great!

[MrIngorodrigues]

sounds like an airplane

[beee1985]

Can I download sound for alarm in the morning?

[popsaka1]

...She's a rat princess! I luv the way the radiator sits way in back of the front axle

-what a great Sat nite cruzer!! What part of the world are you in?

[gdtractor]

Love it !! awesome car!!!!

[TestECull]

Bet it gets good damn mileage with that modern five speed and road gears in the back. Sounds nice too, though the camera clips quite a bit.

[zapwatt]

Nothing wrong with those drums but personally I don't care how cool it looks ya gotta have an air filter.

[maledettoGT]

Good lord the sound this beast make! What a sound man! I love the I6 sound!

Very cool rod mate! :)

[Felipecasabrancapr]

eita porra...ai sim ta cabulosoo

[jeffrreydm40]

SWEET

[MartinchoDH]

Chevrolet 235 ????

[cpmotors]

@MartinchoDH yes

[cpmotors]

@MartinchoDH yes - check out the other video I just uploaded

[MartinchoDH]

@cpmotors Great!! I have got a Chevrolet 253 in my Chevy Apache '60!! I'm from Argentine...Greetings!!

[trbossdoggy]

@cpmotors Why dont you put a 327cui engine or a higher one ? Or are you thinking about this ?

[cpmotors]

@trbossdoggy Over here in the States small block Chevy's- like a 327- are in everything! It gets old seeing and hearing the same thing. This was a good running engine that was installed as is- no rebuild or anything. Keeps the cost down and the bang for the buck high-

[261longstroke]

@FordManMT Fair enough brother, no harm done. I have never under stood people that slag other peoples interests in vehicles other than there own. I am a die hard GM guy, mostly Chev and Pontiac. But i love all cars including Ford, Mopar and the independents. They are all great automobiles and we are all in this together. I own a Canadian 1957 Pontiac with a 261 inline six and a 1974 Chev Caprice Estate wagon with a 400 V-8. Cheers brother.

[FordManMT]

@261longstroke This is true Stroke.

Right now Im building a tube truggy with 38" tires and 4 wheel steering. Im useing a 300ci inline 6. With my new transfer case doubler the final drive ratio is 96:1, should be able to climb anything

[Krassus99]

woha niiiiiiice sound....ilove that. Please more of that!!!!

[airassualt100]

I LOVE IT!!! I am a Ford man at heart,but I am glad to see such a cool truck with a 6 in it! Great job!

[mrfarmerjimbob]

Love 6-pots. They can surprise some V8's.

[GIwillo]

this muste be fun to drive.the sound already sais it

[SuchtUrne]

i need ice in my intime!!! im a german, but i still sit there with open eyes and stopped breath when i view this video ;) id dont know, if my english is correct, but i dont care about ;D i love this "blubb blubb blubb" ;) respect!

[airassualt100]

@SuchtUrne Good English my friend! It's cool that you like the old American cars and trucks. I was in the Army in Germany and had an old Ford truck people loved it every where I went! It made me feel good!

[lasalleman]

Great sound!

[becky334]

you can't get this sound from a rice boiler engine can you? awsome engine

[poelyman]

This made my day! If tech was supposed to make life better,why do I fight with all the time?

[scaringoldladies]

what was the t-5 and clutch out of? did the t-5 bolt up to the 235's bellhousing? thanks Big D

[pumper1970]

the sound is a booming thunderclap. There is a truck in my area with a 250 straight six with a straight pipe. His motor is strong and it pulls hard. 350's..zzzzzzz. i'm glad you went with a motor everyone else throws away.i do the police in your area leave you alone with the safety issues?

[lostbuffalo]

sounds almost like a big rig

[RamblinAround]

Cool car and interesting vid. I've been wanting to take some similar videos from our old hot rods, but my camera is having a hard time dealing with the engine noise.

[FordManMT]

Ford's 300 was the best gas inline 6 ever offered. I own 3 of them lol,

and one is going into my '37 rat rod project

[261longstroke]

@FordManMT Stop dumping on other peoples choice of engine. Enjoy your ford, i am happy for you. Respect others and their choice of engine. We are all in this together. GM, ford, what ever man its all good. Be happy.

[FordManMT]

@261longstroke i wasent "dumping" on his choice of engine. we have a 1954 chevy with a 235 inline 6. I just love the 300 because its nice, great low end power. Just like the 235, but bigger

[mageac]

@FordManMT id rather the 235 myself, but just because the ford 300 is more common...

im a chevy fan and in this case with an open engine bay, id rather the slant 6... just cause it looks more crazy lol

[f100swb]

@FordManMT I'm a Ford guy, and have properly built one in the past, but, your facts need a little adjusting, GMC built a 302, and IH went all the way up to 501 CID.

[HPJVRBLB44]

i want a rat rod so bad

[oltrucksrule]

I love to drive and the ability to see things moving, turning.

[1959chevz]

what is the thickness of the chassi frame?

[Gerold1981]

does it pull pretty good with the I6 ?

[cpmotors]

Yes, it does go pretty decent. It weighs 2400 lbs IIRC so its not bad for a stock 235.

[FIGHTINGCAGE]

nice

[FIGHTINGCAGE]

very nice

[1963impala2dr]

I've been looking at old rods on youtube for 2 years now. .this is STILL my overall favorite. what a beauty. Hope I can build my 32 half this well. speaking of inliners.. I'm keeping the 1932 194 cu in first generation stovebolt!

[fordkillschevy]

drum brakes all around,or did u upgrade it?

[cpmotors]

Its only 2200 lbs- the drums stop it really well.

[computivo]

rochester carbs?

[fahad8118]

dude look to the fun its brokaing

fax  it and need more and more

good luck

[maplelaffs]

nothin like a rodded inline 6 ups the cool factor

[valhallawelcomesme]

love the straight six, dont see too many of those anymore

[Jrichards1959]

cool ride want to build something

similar smart

[wysoft]

Is that a freaking vacuum gauge right on the intake manifold?

[cpmotors]

Fuel pressure gauge off the back of the fuel line.

[MrExnihilo]

Your vehicle warranty is about to expire!

[thepawnshopman]

BUY AMERICAN YES SIR!!!

Sir can we please get a 2 year later update? Great JOB!!!

[oldcheviesneverdie]

i like the music...by GMC and the 6 pak

..chuckle

[ninja6kid]

dude crank that shit i wanna hear it!!!

[thetrico]

Why don´t put it on higher rpm?

It must sound like hell! :D

[philyt]

The GMC striaght 6 is a slow revving torquer, not made for high RPM.

[1954shadow]

This put a real big smile in my face! What is that gauge by the intake manifold, a temp. gauge?

[cpmotors]

Good! It's a Fuel pressure gauge.

[JAROSLAVAGINA]

T5 and a 3.08 final? i bet you get up around mach .95 before it tops out.

that thing talks dirty. . . very nice!

[rgbaker10]

I like the plane yoke steering wheel, that is really cool.

[cpmotors]

Thanks, but its actually the original with a section removed for clutch leg clearance, in driving, its over the left leg.

[socadian]

Nice! nothing sounds better than a stovebolt

[southparkufo]

pussy open her up

[ICEMANZIDANE]

nice

[RexieTheKing]

did you pass M.O.T?

sweet ride =) i like oldschool

[modelleg]

In the future, we'll all be driving rat rods.

[cpmotors]

I wish my future would hurry up and get here!

[elevatormechanic]

sweet video

[VanTonks]

what is the difference between a hot rod and a rat rod?

[ManxAce500]

Hot rods are shinny more "modern classic". Rat rods are balls and bones with flat or no paint. The real "vintage".

[rpeek]

That is one beautiful hunk of iron right there... Thanks!

[KHearse87]

I'm looking at getting a '76 Chevy g10 shorty van with a 250 inline and a 3-speed on the floor. I'd love to do some mild performance work like headers, a cam, 4 barrell intake with a 390 holley and stuff like that. It would probably be just as easy and cost effective to drop in a small-block chevy, but where's the fun in that? Everybody has those.

[wallbanger1968]

@KHearse87 I hope it has/had the head with the bolt-on intake.

[nightfrog65]

I love inline 6's. Good job on not going the common cookie-cutter 350 small block option for your ride.

I had a ford fairmont with a 200 ci inline 6, and that engine was indestructible, even with one cylinder with low compression. Plus, it was easy to work on.

[retroolschool]

gotta respect a guy for not going with an oh so common 350. Nothing worng with a reliable six!

[beanieostrich]

@retroolschool: I agree, 350 ci chevy engines are way too common on a hotrod. I like the inline 6 idea. But I f you wanna stay a V8 dude, dont use a 350. I would use a 429 Cobra Jet on my hotrod.

[mizzoumike76]

@retroolschool I could not agree more.

[airassualt100]

@retroolschool I hear ya man! You see a 350 at every stop sighn and it is nothing amazing. It's great to see something different for a change. I have a 39 International with a 351 W and it'll tear it up!

[SeeProfileForDetails]

@retroolschool ain'ts you twich ain'ts you itch we ain't no bitch

[defrag010]

read the title jmz

[jmz365]

Hey! WHAT KIND OF TRANNY are you running?

[cpmotors]

T5 from an S10! Swap meet special!Thanks for looking!

[herbienbrian]

T5's are great my dads got one in his blazer,thats thing looks like a blast!!

[SimoDERRRRR]

Sixes RULE!! i love my 202!

[70camaro406]

No, it's a 235 out of a '62 wagon. He mentioned it earlier.

Still very cool. Any changes yet?

[tdieselcummins]

felicitaciones!!!!!!!!!!

[spikonaleash]

can some one pleeeeeeees to god help me find a rat rod i neeeeed one very badly lol

[sundeb]

Build one

[tomcatfranks]

Sixes rule! I have a Ford 300 inline 6 in my 65' Ford van, it's a mean-ass motor!!

[jumpbubba]

yea fords sixs are fuckin bullet proof!!!!!!!!

[praynker]

i just love this car and engine i maybe played this video 300 times every time i go on you tube i play it my 235 is getting ther will post one day

[flubbergut13]

Sounds Kinda Ricey

[cyrix1986]

LOL

[wallbanger1968]

@flubbergut13 Yeah right.

[willysdesign]

inline six power!!!it can go at 10,000rpm my 250 did it and still alive!

[corvettels9]

Except with the torque inline 6's make, you don't need to rev them that high to make power. haha good job anyway must've been a sight to see. :D

[willysdesign]

i know about that i mean it didn´t blow the engine, a friend of mine have one with 500 hp and no turbo ,just three webber 48-48 carburators.

[cachaavodkawisk]

show di bola esse tren ai

[InShatteredMolds]

inline tower of power8-)

[89Corolla]

Straight six all the way.

[bsab26bobbed]

Mate,thats 1 mint rat. gotta luv it, keep posting the vids.

[nwredneck390]

Now that's music to my ears! Nothing sounds better than a loud inline 6!

[lasalleman]

Nice sound. Wonder what a 302 GMC would sound like...

[cpmotors]

I keep telling him a homebuilt turbo setup sounds like a fun way to change it.

[ztwntyn8]

cool. i bet a bad coolant leak would screw up your day. lol let's hope not. I can relate.. with our old t bucket. love watchin the inside of those front tires go around.

[RulerOfEverything]

What an awesome sounding six.

[NJPurling]

Not this is my idea of a car!

Cleaning is something you do when it gets so dirty you cant see through the screen. The rest gets a dose of a hose when you got nothing better to do.

[xiposk8boarder]

nice view and vid love the sound

[teedot]

oh man i love that sound!!!!

[70camaro406]

Nice...is that a 250 or 292? What 5 spd did you use, S-10 T-5? Cool rod. I'm doing a '47 Chevy with 250 L6 and Sag 4 spd.

[cpmotors]

Thanks-

Its a'62 235 out of a wagon mated to an S-10 T-5.

I have to get a better vid of him actually getting on it, he was going easy on it there.

[unitednudistmop]

drifter!!!

[greatwheelspin1984]

Love the sound from a big inline six, much better than a V8!

[lamarimpala]

i love it my 1964 impala will be a rat rod

[LashoutUK]

That's sweet 8D