the best way i found to remove the washer fluid, was to remove the fog light/the plastic where the fog light would go if you dont have fog lights and makes life a LITTLE easier, still want to kick that guy in the nuts
Hey I did this using AEM's exact instructions, witha 10mm extension so I didnt have to remove the headlight or any of the stuff you did. Took me all of 20 minutes to install this and I have very little experience doing self installs
Auto's have one hose that connects to the intake for the valve cover breather.
Manuals have two, one for the valve cover and the second for the brake booster.
People who own an automatic will have to go buy a 5/16 or 3/8 (can't remember which one) vacuum cap to cover the second hose port otherwise dirty air goes into clean engine.
If you have any other questions or need more help send me a PM on Gencoupe
I didn't have one handy (it's on my christmas wishlist *crosses fingers*) otherwise I would have, but that is a good suggestion for people who might be looking at doing this.
might be a little gain but every bit counts in the end right? :P
I plan on getting new intercooler pipes, intercooler and maybe an axel back since the stock is already pretty free flowing once I took out the unnecesary second cat.
canadian?
patsalwayshere 1 week ago
@patsalwayshere
Yup, said eh at some point did I?
Snoopy0812 1 week ago
@Snoopy0812 yeaa loololol yea and add the ooot sound to a lot of your words
" oooout"
patsalwayshere 1 week ago
YOU SHOULD CLEAN YOUR CAR BEFORE DOING ANY VIDEO
yanbls01 3 weeks ago
@yanbls01
You should learn how to turn off your caps lock.
Snoopy0812 3 weeks ago 3
Holy shit Batman. That's a lot of crap to do. I was worried about my car cause its Turbo is kinda back in there. Good luck to who ever does this mod
randrewm97 1 month ago
this seems like a complete pain in the ass
Volume1216 2 months ago
What kind of sound system do have in the car.
nitro300 3 months ago
@nitro300
mostly stock, some custom stuff.
Snoopy0812 2 months ago
so much work.....
lilaznthug510 5 months ago
the best way i found to remove the washer fluid, was to remove the fog light/the plastic where the fog light would go if you dont have fog lights and makes life a LITTLE easier, still want to kick that guy in the nuts
czballer902 6 months ago
AEM way better then K &N
Lilmiddwest262 10 months ago
@Lilmiddwest262
So far I agree, love this intake.
Snoopy0812 10 months ago
wtf.. you have to go thru all that just to install an AIC!?!?.. geezus.. you might as well swap your engine....
B33ZMR 1 year ago
Hey I did this using AEM's exact instructions, witha 10mm extension so I didnt have to remove the headlight or any of the stuff you did. Took me all of 20 minutes to install this and I have very little experience doing self installs
msburr87 1 year ago
so of ur car is manual, I can leave the two holes unplug?
ericleeSupSayK 1 year ago
@ericleeSupSayK
The holes have to be either plugged into the hoses, or covered with a vacuum plug otherwise you'll get unfiltered air into your intake.
Snoopy0812 1 year ago
@Snoopy0812 this applies to manual and auto right?
ericleeSupSayK 1 year ago
@ericleeSupSayK
Yup.
Auto's have one hose that connects to the intake for the valve cover breather.
Manuals have two, one for the valve cover and the second for the brake booster.
People who own an automatic will have to go buy a 5/16 or 3/8 (can't remember which one) vacuum cap to cover the second hose port otherwise dirty air goes into clean engine.
If you have any other questions or need more help send me a PM on Gencoupe
Snoopy0812 1 year ago
@Snoopy0812 Ok let's make this easier, I have a manual, what I need to do?
ericleeSupSayK 1 year ago
have you ever tried a ratcheting close end wrench? slow but will save you from ripping the bumper off.
wompwomp55 1 year ago
@wompwomp55
I didn't have one handy (it's on my christmas wishlist *crosses fingers*) otherwise I would have, but that is a good suggestion for people who might be looking at doing this.
Snoopy0812 1 year ago
seems like a lot of work for the little gain you'll get from the intake...
Great video though man! thanks!
adamaoc 1 year ago
@adamaoc
might be a little gain but every bit counts in the end right? :P
I plan on getting new intercooler pipes, intercooler and maybe an axel back since the stock is already pretty free flowing once I took out the unnecesary second cat.
Snoopy0812 1 year ago
nice video
besoncus1989 1 year ago