yes I have that where I saw your being rebuilt and you had the wires numbered with blue tape because it is a kanuni the colours of the wires are different and it has electronic ignition and a electric tacho thanks Ray
@jawaczman Hi! Sorry but when I sold the MZ I gave the owners manual with it. You can try to search from internet. It have to be available for free somewhere. Cheers
can you tell me what is the silver tube between the carbouretter and the engine? looks like an expansion chamber but I've not seen one there before. if its something you've added, does it make much difference? check my videos to see my 301 on a dyno :-)
@DaBuzz92 No nie do końca normalne , jeśli silnik sprawny (luzy) to gaźnik ma ustawione za niskie obroty i są za duże wibracje do tego może być uszkodzona guma tłumiąca wibracje przenoszone z silnik na rame poprzez mocowanie silnik do ramy.
@limakm90 Thanks! I can't say anything about the difference because boost bottle was in place when I bought the bike. Previous owner made it from aluminium and it's welded on intake manifold. It should improve low rev torq but I don't know. :-) I think it needs reed valve to work 100%.
@terence20001 Thanks mate! Practical is the word. ;-) All the changes I made are for comfort in touring. I forgot to wrote to description that I put the side stand to rear axle and original handlebar is raised with about 45mm.
yes I have that where I saw your being rebuilt and you had the wires numbered with blue tape because it is a kanuni the colours of the wires are different and it has electronic ignition and a electric tacho thanks Ray
jawaczman 2 months ago
hi do you have a wiring diagrame for this bike I need to rewire mine and all the one I have are different thanks
jawaczman 2 months ago
@jawaczman Hi! Sorry but when I sold the MZ I gave the owners manual with it. You can try to search from internet. It have to be available for free somewhere. Cheers
twostrokesmoker 2 months ago
piękna maszyna. Pozdrowienia od polaka :)
Fodro89 3 months ago
can you tell me what is the silver tube between the carbouretter and the engine? looks like an expansion chamber but I've not seen one there before. if its something you've added, does it make much difference? check my videos to see my 301 on a dyno :-)
davegsm82 5 months ago
shaking like a mofkr
Thomsonicus 6 months ago
shit, is not wonderful.
jupiter891 7 months ago
VERY VERY nice bike. I like it.
pawcio8rs 8 months ago
ale wibra niesie po ramie :D
rufusetz150 11 months ago 6
@rufusetz150 The crackling sound comes from side protector bar's upper mounting. Sounds comes only on low rev's.
twostrokesmoker 11 months ago
@rufusetz150 Normalne w MZ :)
DaBuzz92 4 months ago
@DaBuzz92 No nie do końca normalne , jeśli silnik sprawny (luzy) to gaźnik ma ustawione za niskie obroty i są za duże wibracje do tego może być uszkodzona guma tłumiąca wibracje przenoszone z silnik na rame poprzez mocowanie silnik do ramy.
rufusetz150 4 months ago
@rufusetz150 A ja Ci mówie ze dopuki się etka nie obraca wokół swojej osi stojąc na centrali to jest dobrze ;)
DaBuzz92 4 months ago
@DaBuzz92 Wiesz mozesz wierzyć w co chcesz masz wolną wole. Ja swoje wiem i dużo zarżniętych etek widziałem tak samo i ich silnik od środka.
rufusetz150 4 months ago
zaraz wszystko się rozkręci:)
bandyta8977 1 year ago
już zmęczony bo 27tys, na zegarze... ale ksiazkowo powinna 40 tys km wytrzymac...:) ale w dobrych rekach oczywiscie:)
Kamil25021990 1 year ago
zmniejsz obroty to boli nawet w ucho :(
Unkn0wnShadow 1 year ago
Did you noticed any changes in engine work after mounting boost bottle?
Nice MZ !
limakm90 1 year ago
@limakm90 Thanks! I can't say anything about the difference because boost bottle was in place when I bought the bike. Previous owner made it from aluminium and it's welded on intake manifold. It should improve low rev torq but I don't know. :-) I think it needs reed valve to work 100%.
twostrokesmoker 1 year ago
Kurwa zeby moja tak równiutko cykała :(:(:(:(
DaBuzz92 1 year ago
Wow! It's beautiful! :)
Drive safe.
vkosav 1 year ago
@vkosav Thanks!
twostrokesmoker 1 year ago
zmeczony sprzet
Karol4T 1 year ago
Comment removed
vkosav 1 year ago
super :D
SNAper24 1 year ago
@golf1diesel Thanks! Twostroke sound is the best engine music. :-P Good luck for your restauration project! Greetz from MZ mate from Finland.
twostrokesmoker 1 year ago
nice job! looks great
CarstenOepping 1 year ago
@CarstenOepping Thanks! I'm very pleased you like it.
twostrokesmoker 1 year ago
You've made some nice aswell as practical changes . She's looking good . Like the leg protecter's with cruise footrest . Nice !
terence20001 1 year ago
@terence20001 Thanks mate! Practical is the word. ;-) All the changes I made are for comfort in touring. I forgot to wrote to description that I put the side stand to rear axle and original handlebar is raised with about 45mm.
twostrokesmoker 1 year ago