I have had the same problem with the rendering process. I have noted the frame that it stops on and go back to the project in the edit screen. I am in Australia so we are 25fps. if my render fails at frame 4525 I divide by 25 = 181 seconds. Divide by 60 and I am at 3 minutes and 1 frame into my project. I have found 99.9% of the time my render failure is caused by a transition. Remove or change the transition and the render problem is solved.
@Bartsk84eva >>>---> Have you tried reloading Pinnacle. Save the video you are working on and then delete Pinnacle and then re-install it. Another thing you could try is Start>All Programs>Accessories>System Tools>Disk Cleanup Then following the instructions. Of coorse, there are menay other reasons, but see if one of these helps.
@Bartsk84eva when that happens i have a few things i do and i mostley helps .... go to the spot were it stops and cut away the very first frame of the clip .... or , dont render at 1080 p ... render in 1080 i .... and i try to save after every singel step i take , i know its sucks but that helpt me alot .....
@Bartsk84eva . Could be a transition causing the problem, try deleting it or swapping it for another and see what happens. I have had an effect that I applied to a scene cause a problem. I created another project using that scene only, applied the effect and rendered it to make avi. Studio rendered that ok. I then swapped that scene with the scene that was in the original project. Studio then rendered the whole project without a problem
@zaffdoc either one idk but like i think i used up all of my capturecard cuz it really wont let me record anymore so i wanna kno a way to remove them .... Do You know how to?
I would like to know this as well. After you "Import" video, and you see the clips in the "Edit" screen, how do you select specific clips and delete them? I see no menu of right clip selection to do this. :(
@stardustcreature Why do you want to delete a specific clip? Visualize all the clips together as a film strip and each clip as a frame holding a movie image between the sprocket holes. If you clip out one of the images then the program does not have a reference point to relate all the other images. When you are finished editing and import another video they will all disappear as if you removed the whole film strip, and the new set of clips will appear (like a new film strip).
I have had the same problem with the rendering process. I have noted the frame that it stops on and go back to the project in the edit screen. I am in Australia so we are 25fps. if my render fails at frame 4525 I divide by 25 = 181 seconds. Divide by 60 and I am at 3 minutes and 1 frame into my project. I have found 99.9% of the time my render failure is caused by a transition. Remove or change the transition and the render problem is solved.
videoman3857 9 months ago
Thanks for the info. Pro Dad Mercalli plug in for studio does this better
Looks like you hand held the camera. Try holding it on the dashboard and applying a downward force you'll be surprised at the difference
videoman3857 10 months ago
This Video Is very cool due to the fact that its in downtown Shreveport, La les le bon temp roule
blackpanther5901 10 months ago
For some reason my Pinnacle is getting stuck rendering at 20 seconds each time for no reason! Any help would be greatly appreciated thanks!
Bartsk84eva 10 months ago
@Bartsk84eva >>>---> Have you tried reloading Pinnacle. Save the video you are working on and then delete Pinnacle and then re-install it. Another thing you could try is Start>All Programs>Accessories>System Tools>Disk Cleanup Then following the instructions. Of coorse, there are menay other reasons, but see if one of these helps.
zaffdoc 10 months ago
@zaffdoc Thanks for that I'll try it now! :) It's for my media A-Level so I really need to sort it thanks!!!
Bartsk84eva 10 months ago
@Bartsk84eva when that happens i have a few things i do and i mostley helps .... go to the spot were it stops and cut away the very first frame of the clip .... or , dont render at 1080 p ... render in 1080 i .... and i try to save after every singel step i take , i know its sucks but that helpt me alot .....
reedeema 9 months ago
@Bartsk84eva . Could be a transition causing the problem, try deleting it or swapping it for another and see what happens. I have had an effect that I applied to a scene cause a problem. I created another project using that scene only, applied the effect and rendered it to make avi. Studio rendered that ok. I then swapped that scene with the scene that was in the original project. Studio then rendered the whole project without a problem
videoman3857 9 months ago
do u know how to delete a video tht has already been captured
SeekTheSilent 1 year ago
@SeekTheSilent I am not sure I understand what you want to do. Do you want to delete the video from your hard drive or from Studio?
zaffdoc 1 year ago
@zaffdoc either one idk but like i think i used up all of my capturecard cuz it really wont let me record anymore so i wanna kno a way to remove them .... Do You know how to?
SeekTheSilent 1 year ago
@SeekTheSilent First backup all your videos from your capture card to your hard drive. Then delete the videos from you capture card.
zaffdoc 1 year ago
@zaffdoc
I would like to know this as well. After you "Import" video, and you see the clips in the "Edit" screen, how do you select specific clips and delete them? I see no menu of right clip selection to do this. :(
stardustcreature 1 year ago
@stardustcreature Why do you want to delete a specific clip? Visualize all the clips together as a film strip and each clip as a frame holding a movie image between the sprocket holes. If you clip out one of the images then the program does not have a reference point to relate all the other images. When you are finished editing and import another video they will all disappear as if you removed the whole film strip, and the new set of clips will appear (like a new film strip).
zaffdoc 1 year ago
Another bang up job zaffdoc. :)
bigbadredsox 1 year ago