Airsoft Evike.com- Tutorial on how to install a one piece hop-up unit

[gobldegook100]

Try contacting kwa or the tech forums. They will help or fix ur gun

[xDESERTRUSHx]

Hey i just installed a new hop up in my KWA m4 and the bbs still drop a lot. do i need to work the hop up in at all? or something? please help.

[thefoshizle2]

just currently put on a prom my purple bucking and i am getting under hop when the nub is down all the way! cleaned the barrel thought it might be too oily but it wasn't...maybe my compression is bad? but i doubt it

[TacticaLWoLFSoftair]

Thanks !!! You saved my weapon's life !

[zhadowsun]

Very helpfull video, thanks :)

[Jackal40k]

muted

[plmason12]

The screw to the adjustment gear is too small and wont thread into the hole. What can i do?

[warriorr14]

cut your nails

[GrozaBathrust]

when changing into a one piece hop unit, do yourself a favor and install a tight bore barrel upgrade along the way.

[DeathShepardAirsoft]

@MrHumbleJJ It adds back spin to the BB whick helps to stabilise the it in flight.

[MrHumbleJJ]

Whats a hop up?

[pchca102]

is this the same for a metal hop up

[wybraniec007]

does anyone know the title of this track ? :D

[chargers705]

I wish my hop up could slide on that smoothly.

[nuclearfish010]

@chargers705 use more oil, plus plastic hop ups are real easy to get in there. no pun intended

[ELITEclan100]

Sorry, but is it bad that I cant find the spring that is on the outside of the hop-up unit??? 4:10

Thanks

[FrenchMrToast]

Mine didn't come with a screw for the adjustment wheel...

[brunzy1994]

can you use gun oil for the silicone oil

[strayferret]

but where did the spacer go? not needed?

[teheelmao1]

for the silicone oil? would it work if i got it from home depot? it says 100% silicone

[mrwiggles352]

PLEASE PLEASE PLEASE REPLY..i need to know where i can find a c lock for the barrel casue i lost mine:'(

[SniperShotz99]

wats the purpose of the one peice hop up?? is it easier to set or something??

[supergiff8]

When I installed my hopup and shot, my BB's go straight into the ground. I think its due to the fact that Evike didn't give me a spacer.

[halopro9995]

Hi I just got a madbull 60 degrees bucking and i put the bucking onto my barrel and slide the barrel with the bucking on it into the hop up assembly i go to close the hop up unit by putting the c clamp or whatever back on but it wont click back in please help

[JWReynolds96]

so when i do this the gear dont spin easily. bad?

[SoulSoldier74]

do i have to put on this hopup unit for the metal recievers please respond?

[AirsoftBackUp]

nails are GREAT for helping with installing small parts on an airsoft gun

[ACAirsofting]

Whats the purpose of a one peice hop-up?

[0mgwtfbbq21]

the gear fastener looks like magpul logo :O

[ZOMGvideoGUY]

cut your fucking nails...Your nails are an imge of your company!!

[halopro9995]

I just revieved my KWA m16a3 with a 6.01mm barrel i changed the gun's stock barrel to the upgraded 6.01mm but it seems to be less accurate then before can someone help thanks

[Ryfisch2207]

@halopro9995 my only guess is that the new barrel is significantly shorter than stock or you installed wrong. (what model/company was it that made your gun?)

[ProgDrummerJDG]

@halopro9995

That's completely normal brother. Just go through the normal break in period (it's in your manual) lubing up the barrel periodically. After about 2000 rounds you'll see a HUGE improvement

[ElitePancake1]

im still confuesed about what im doing, do you have to buy a different hop up system or something?

[stupify4life]

where do i get "silicone oil" in the automotive section or something?

[evikecom]

@stupify4life You can get it from our website. Do NOT use automotive silicone oil. The lubricant is too thick.

[stupify4life]

@evikecom yea, i checked your site right after this comment. thanks

[skaterFORever11]

@evikecom i have a jg m4a1 and i want to add a metal rail system to it but where do i put the battery then

[ZOMGvideoGUY]

@stupify4life dont listen to these airsplat fucktards...you can get any kind of silicone oil as long as its 100% silicone oil..you can get it at walmart for like 2 dollars...

[cccplt]

thanks for making this vid

[WoundDragon]

do i have to change the hop up to install the upper recievier

[WoundDragon]

do i have to change the hop up to install the upper reciever

[airsoftmorelia]

@WoundDragon no

[WoundDragon]

do i have to change the hop up to install the upper reicavier

[Ryansairsoftreview]

my gun doesnt do the first part i cant take off the hop up i took off the clip but i still cant get it off plz someone help also it is a jg cqb if that helps

[grazul]

Great vid. how the hell do i instal the hop up system in my gun, it only has a slight circular hole where the 2 piece went, but i can't fit the one piece cos it's a square! the top and bottom receivers don't connect!

[PSPmaster321]

What I never understood is, why is that hop up spring needed? (at the end of the video) It just seems pointless.

[darkerik411]

can you make a video on how to put a 1 piece hop up into a gun that uses a 2 piece hop up

[iG6videos]

@darkerik411 u cant install a 1 piece into a gun tht required a 2 piece, its all about the lower receiver, if u wanted to install a 1 piece you would need a new body or do dome cutting. srry...

[Prototypepwns1998]

@angrymuffin123 The one piece hop up is used for metal body airsoft guns while the two piece is used for plastic bodies. That's why the disassembly is different.

[HOTTESTHERE]

haha i were thinking o two angles how helpfull and nice of you that is something differant but then i got to step 9 and they dident do that anymore and also they say if the nub dident slide u had to start over then i understod why they had two angles =P

[angrymuffin123]

wats the upside to haveing a 1 piece hop-up compared to a 2-piece?

[iG6videos]

@angrymuffin123 accuracy, durability, easy to fix

[schoolistorture94]

when is the metal body installion video coming in? im stuck on a part

[Stealthmaster15]

Geez you hosed the bucking with silicone.....that's going to mess up the accuracy because some definitely had to work it's way inside lol.

Good video other than that.

[randal0007]

@Stealthmaster15 I was stunned when i saw how much silicone he put on it. o.0 That's gonna swell the hop up.

[FlamingoAirsoft]

Check out my channel for a common airsoft problem and how to fix it

[choots01]

The Matrix M4 AEG can only use the stock Matrix hopup unit. Other after market hopup units are NOT compatible (Madbull, G&G, G&P, etc). I believe this is due to the nozzle length in the Martix M4's.

[hanweizatoichi]

@choots01 Really? that sucks :/

[SgtJak1665]

lol i dont want to be rude you need to cut your nails bro^^

[Nick19997]

@SgtJak1665 Just saying-some times a job needs to have longer nails so its easier to work with small tools-just sayin...

[heath72632]

@SgtJak1665 nails are good tools it is usefull to have them and who knows it may be a chick!

[MrPukla]

@SgtJak1665 he uses them as an tool xD

[CustomAirsoft17]

@SgtJak1665 those arent nails those are hopup tools.

[CustomAirsoft17]

@SgtJak1665 those arent nails those are hop up tools.

[mifslim]

@SgtJak1665 what if he plays guitar?

[SgtJak1665]

@mifslim well there is already an instrument to stroke the guitar up and down called a plectrum.

[mifslim]

@SgtJak1665 lol, But classical and flamenco guitar genre uses fingers a lot more then picks(plectrum). hehe

[brunzy1994]

@SgtJak1665 long nails are pretty useful

[NinjaRiCe47]

Anjunabeats! hahaha never thought i would hear trance on a normal video like this! ^^ made my day haha thanks for the upload

[PuppetMaster303]

Evike needs to do more reviews on guns.

[TrackingAirsoft]

@PuppetMaster303 Some of the cheaper guns to. That'd be nice.

[WillC5517]

good video