STOCK KWA M4 Lipo Test

[dazlia2]

dick head! whats the point in even uploading this shit? it tells/shows you fuck all! WANKER!

[azntranceboi3131]

@dazlia2 lol, i think i should take that as a compliment? haha when i first uploaded this video, this was the first gun that was advertised as LIPO ready. Wanted to show you internet people whats all about haha

[LVAIRSOFTTEAM]

BREAKING NEWS:100 fish killed from plastic choking in a lake.

[DriftDuramax]

That's around 25 rounds a second

[Luigi110067]

What weight bb's should I use with this gun? My friend said to use .30's

[azntranceboi3131]

@Luigi110067 .30's are what i use, but they get expensive so if you cant afford .30 all the time then any weight .25g or higher will due. high quality bb's only! KSC/KWA brand preferred.

[BruceJBCpaintball]

I am a KWA Owner and I approve this video.

[blythejunior]

you just waste the BB's

[WildMexicanSeabass]

I have a 2GX KWA M4 and after comparing the old and new side by side the 2GX showed its prowess. With a 9.6 the ROF is 21 BPS and range is 150+ stock

[jer9716]

god I need a peq box and want a 10.8 but it makes me wonder do I really want this kind of ROF? yes(:

[HackerAndBootSniffer]

I burnt the fuse out on my ARES PPSh doing that...

[Slash396]

Steven6501 this gun is lipo ready and has the best internals in airsoft the gearbox is meant to be shit like that... It won't break

[bilirubinu]

Nice vid

[XxAIRSOFTN00BSxX]

I used my KWA in one day of airsofting and noticed that it sounded funny so I opened up the gearbox and noticed the Piston was COMPLETELY shredded. Now I never hold the trigger down on full auto for more than 2-3 seconds so to find this I was completely astonished but I replaced it with a BRAVO Hard Poly Carb piston and also replaced the plastic cylinder head with an AIM TOP Stainless Steel Double O-Ring Cylinder Head and the air compression is AMAZING!!

[Steven6501]

Ruining the motor Gears, and everything else, but pretty sick. I'm getting one in one week.

[clinttech]

Trunkmonkey, I use the lipo 11.1 echo1 but it' only fits bcoz I changed the hand guard to a magpul MOE, but kwa contacted me and they said you can use a mini brick on the stock guard

[trunkmonkeyairsoft]

what lipo did u fit in the handguard

[TheApplepoo100]

ur gonna overheat ur motor like that

[azntranceboi3131]

@TheApplepoo100 nope, still running the exact same motor from this video and its still running just fine. Pinon gear and all., and its been over 3 years and so many rounds that I can not even count.

[silenceimurderyou]

@azntranceboi3131 my kwa isnt that old and i shoot it with a 9.6 and i never hold the trigger for more than3 seconds. the fuse popped and i replaced it. but do you know why it would pop?

[azntranceboi3131]

@silenceimurderyou Chances are the fuse popped because the fuse itself was bad. It happens, since KWA does not produce their own fuses you may end up with a bad one here and there. As long as when you fire the gun and it sounds good then you should not need to worry. If later on you find that your gun did have a problem contact KWA and their customer service team will take good care of you!

[xFieryAssassinx]

Got a KWA M4A1 yesterday (the one with the 2XG gearbox) and it's beastly enough with an 8.4v NiMH, I can't wait to get a LiPo =D

[Fl4m3thro3er]

by by motor

[FuelAirsoftSniper]

Could you give me a link to that ACOG? I've looked for the same one, but can't find the one that attaches to the carrying handle.

[azntranceboi3131]

@FuelAirsoftSniper the acogs come with the rail mount. just unscrew it from the base and install on carry handle. Smart. (epicmealtime reference)

[wybraniec007]

fuck me.

Freaki'n fast. :D

[GWMAirsoft]

OMG ITS TIM FROM ASGI

[kiloman2]

Youll fry your motor doing that

[azntranceboi3131]

@kiloman2 nope.

[JohnWayne2122]

@azntranceboi3131 did this do any damage, I understand that it didn't destroy the gun, but doesn't that put a lot of wear and tear on the gun?

[azntranceboi3131]

@JohnWayne2122 alas after 3 years, 5-8 ops, and countless skrim games. The gear box finally went down. A blown bearing and a busted cylinder head. But honestly, that took a lot of trigger time to actually get it to break. Now i've gotten a replacement from KWA and its back up and running. I'm still using the original motor that came with the gun. However, i got a new 2gx gearbox in my rifle now! =) upgrade! KWA customer service and pro shop are the best!

[ApocalypticMike]

@kiloman2 It's LiPo ready cause it's a KWA. Best airsoft gun maker EVAR.

[bmxfreak27]

is that tim from airsoftgi

[MondayAirsoft]

U don't deserve a kwa

[blackhawk42x]

@MondayAirsoft why not?

1: he use's midcaps

2: a kwa is made to shot a lipo right out of the box

3: he's having fun with his kwa and making cool videos I dont see why you dont think the guy deserves a kwa?

[azntranceboi3131]

@MondayAirsoft you are entitled to your own opinion. I'm not going to tell argue with you. However, unlike you i've been given this gun for testing.

[wenstynesvlogs]

@MondayAirsoft why doesn't he, there nothing special

[soccermom31411]

KWA is the best!!! but also very expensive

[azntranceboi3131]

@soccermom31411 Quality has it price, but you will save money in the long run since you wont need to be spending money replacing old parts and guns that dont work as well. this will out last most if not all products currently available out there on the market. Given proper care and maintenance

[anuffsaidinnh]

WHAT THE FUCK IS LIPO!?!?!? >:(

[azntranceboi3131]

@anuffsaidinnh Lithium Polymer, its a type of battery. Nickel metal hydride is what you are used to seeing as NiMh

[Jasonator93]

dumbass.... go ahead... burn up those gears.... dont say it wont just because its a kwa and made lipo ready. when kwa claimed that. they didnt expect fucking retards to go out and do this.

[azntranceboi3131]

@Jasonator93 i'm going to tell you right now. my gun is still functioning. properly maintained and with the proper battery your gun will last as long as mine. go drink your haterade because you dont know what you are talking about.

[lilexplosiv]

@Jasonator93 It dont burn your gearbox up well it does but it doesnt ruin it, gearboxes have limits ex 50000 shots, the lipo battery reaches it faster

[azntranceboi3131]

@lilexplosiv I understand that, however for some odd reason. People still ask for the highest rate of fire from their guns, people want that competitive edge on the field. I'm just demonstrating your options. If you want this kind of rate of fire, it would be best to go with KWA since they are capable of sustaining this kind of fire for a longer period of time than many other guns out there on the market.

[kbman99]

You shouldn't shoot your gun like that ;)

[IpwnNoobs4TW]

Is that Tim from airsoft GI

[azntranceboi3131]

@IpwnNoobs4TW NO, i am no tim from airsoft gi.

[cobwebhead]

is that the guy from the airsoft gi videos??

[azntranceboi3131]

@cobwebhead haha no, I used to work at steel hawk airsoft in OC. But i do know the guys at GI, good bunch of guys.

[NinjaDKDavid]

@azntranceboi3131 Cashier guy is such a douche bag. LOL I just left.

[azntranceboi3131]

@NinjaDKDavid where?

[NinjaDKDavid]

@azntranceboi3131 Airsoft GI, it was only the Caucasian guy. It was on my birthday too. So I was like whatever and I left.

[BriMan907]

Many people are eager to jump on the KWA bandwagon because of the term "Lipo Ready." Many guns today that have great internal quality, and some (in my opinion) better than KWA 's and in a similar price range. They just don't go out on a limb and say their product is "Lipo Ready." I had many problems with my KWA. But don't get me wrong, I do know many people who have had better luck. My problem is that KWA's after market compatibility is terrible making finding replacement parts a hassle.

[azntranceboi3131]

@BriMan907 To be honest, third party parts dont really do well. Its like a car, you may have some awesome new part that you want to put in, but when you do you find out that it interferes with your other parts. if you call KWA or go on their proshop you can buy the original OEM parts. Those are the best for your gun.

[BriMan907]

@azntranceboi3131 I do completely agree with you. Although I have managed to keep mine up and running with third party gears and pistons, it has just been a rough journey. My personal thinking, is it more practical to own an airsoft gun that can take almost any after market part, therefor making it easier to maintain and upgrade? Or to own a KWA or possibly a PTW, which when the internals wear down and break will be a lot harder to find parts for and to repair. Both sides have their benefits.

[azntranceboi3131]

@BriMan907 That is a great point. I do not dispute that being able to take those third party parts is very important for ease of maintenance. I just wanted to reinforce that the parts given by KWA are probably the best bang for your buck. if you can afford to pay and wait for the OEM parts to be shipped to you, you will most likely be happy with the results.

[soccermom31411]

how has his gearbox not blew up?

[ilikepie779]

@soccermom31411 its a KWA they tend to have very high quality internals (Gears,Ball Bearings, Pistons, etc) and will have no problem running a 11.1 through it .^_^

[linglingjr]

waste of 400 bbs

[thevideolord]

hell yea the 2x is better i love my KWA M4A1 it is posably the best M4 out there

[msharpashotr]

@thevideolord I think it is the best M4 out there. All of my guns are KWA and did you know that they are making a GBB M4? It is called the LM4 SR7. That is the railed version.

[bullmeatt]

i have an 11.1V 2300 mAh 20C LiPo in my stock KWA 2xG it shoots 400-410 fps average 405 fps the rof is about 25 bbs per second. Ive put 10 000 rounds through it and its had NO problems.

KWA is a good example of airsoft, it is an average priced gun while top of the line performance. You CANNOT go wrong with KWA.

[joemanhp]

@bullmeatt i compleetly and 100% agree with everything said there... i had to mod a battery to fit it in my stock (kwa km4 sr10) but its lipo and it works AMAZING best gun i have ever bot and not to sound liek a snob but it is the LEASE expensive airsoft gun i have ever purchased and it is the best... i own an automatic sr sniper and it was well over 600USD and it is absolutely nothing compaired to my kwa sr10 and its not even a sniper!!!!!!!!! kwa is the way to go and its the thing to do.

[azntranceboi3131]

@joemanhp Glad to hear that you love the product!

[azntranceboi3131]

@bullmeatt KWA is amazing and if something were ever to go wrong with the product, the customer service at KWA is amazing! they will take care of you!

[Captmorgann]

@azntranceboi3131 yah but if you live in canada an have a kwa product they wont cover the gun. I didnt even put 1000 rounds through mine kwa m4 s-system an they basically said shitty deal to me.

[azntranceboi3131]

@Captmorgann Sorry it has to do with the fact that shipping them back to canada wont happen. They cant ship guns through the boarder, its not KWA's fault, its your country.

[Captmorgann]

@azntranceboi3131 actually the laws in the US state that any gun being shipped into the US has to have a orange tip. So i can ship the gun to the US an in canada we require clear/smokey parts on our guns which mine does have so it would be able to be sent back to me. Also i could bring the gun in using my Firearms Licence

[azntranceboi3131]

@Captmorgann Ok, I contacted someone from the service center about your gun. Unfortunately, your gun was not imported through the KWA-USA branch. It was not their original product, hence no warranty with KWA-USA. Sorry dude, you should try to contact whoever you bought it from, to see about a store warranty.

[Captmorgann]

@azntranceboi3131 oh i did an there useless, they wont even fix the gun an i offered to pay for the repairs.

[bullmeatt]

@Captmorgann ok does your gun make a winding noise when you pull the trigger? And it doesnt shoot it just keeps winding? Makes like a humming noise. If so then i know what happened to your gun, and i know who produces the canadian guns, depending on were you ordered the gnu from you can usually get a refund by sending the gun back. tell me what happened though

[msharpashotr]

@azntranceboi3131 recently there have been fakes going around...

[trackrunner2410]

@bullmeatt Where did you get that battery and how much was it?

[bullmeatt]

@trackrunner2410 ebairsoft

dot

com, they are terrible for shipping things, ive been waiting 7 months for a few items and about 3 months for another set of items.... they take like a week to reply to emails too. However i got the battery for $40 from there and the charger was only $20

[AlphaX500]

@bullmeatt is it true that lipo batteries can ruin the internaals?

[bullmeatt]

@AlphaX500 Lipo batteries will increase wear and tear, your gun will break quicker. All guns break eventually its just a matter of how long it takes to get there. I still use my KWA with lipo batteries, probably a total of 50 000 rounds through it. Recently I switched the spring to an S130 and it was putting out 500 fps and the cylander head broke after about 1000 rounds. I replaced it with a metal one and it hasnt broke yet.

[azntranceboi3131]

@AlphaX500 its true if your gun is not up to handle it. it also matters about the type of batteries you use, not all batteries are made the same even if the label say they are the same they arent. Most Lipos do not put the output rating on the battery and even tho it reads 7.4v it could damage your gun. Make sure you buy your battery from a reputable place to avoid damage.

[jerry0o8]

@bullmeatt plz let me know where you bought ur 11.1v 2300mAh 20c LiPo battery, is it Nun Chuck Style that fits into the stock crane? or do you have a PEQ box on the hand rail?

[azntranceboi3131]

@jerry0o8 The battery is small enough to fit in the handguard. Thats what makes the Lipo so good, the fact that is small and compact while packing a lot of punch.

[jerry0o8]

@azntranceboi3131 ahah yeah, but my KWA KM4 RIS, and the battery goes to the back stock, so my battery i bought 11.1v, 20c, 2200mAh doesn't fit in the back stock =[. If i had a hand guard it would fit there guarantee.

[azntranceboi3131]

@jerry0o8 there are lipos that are designed to fit in your stock. Call KWA and they will help direct you to the right place

[promotecheese2010]

@bullmeatt ...average price?

[bullmeatt]

@promotecheese2010 In canada. They are 400$ Were as CA are around 500 and JG Echo 1 and other stuff like that are 300

Although ive noticed in the US KWA are more expensive than the average gun

[azntranceboi3131]

@bullmeatt please keep in mind, that the KWA aegs from canada are not the same from the USA version.  the Canadian KWA's are modified to meet the legal requirements of Canada, as a result your product's results my vary.

[bullmeatt]

@azntranceboi3131 Yes, the receiver is changed from the metal one to a tinted plastic one. But for your information I own 2 full metal ones from the states. A 1st gen and a 2gx. & my cansoft one internally is the exact same as my other american ones. Check out my latest vid I have a vid of 2 KWA's on 11.1 lipos guys check it out none of them have had any problems!

[azntranceboi3131]

@bullmeatt thats good. however, US KWA aeg's do undergo a quality control process. I've seen the techs personally hand check every gun before shipping them out to retailers. I can't say the same for the canadian branch. I only bring this up because another canadian airsofter posted in my comments about his AEG and some problems he was having.

[DXGROW]

@bullmeatt average priced???? 360 isnt lol i perfer g and g they r good and affordable

[azntranceboi3131]

@DXGROW you are wrong. the least expensive KWA in the USA should retail around the $290 mark. The $360 guns are the SR series. G&G make a low budget gun that is cheaper, however their internals are not up to par with the KWA guns.

[STONESOLDIER19]

Mine arrives tomorrow yeah boyyyyyy

[franklin9500]

o mi god

[azntranceboi3131]

@sharktooth455 i was shooting, if you look very closely at the barrel and the tree trunk to the right of it you can actually see white bb's fly. that and listen to the sound of the gun, when bbs are going through it sounds different than when its empty and dry firing.

[NessSibe]

Can you tell me the brand of those magazines?

[paintballlpplayer45]

what lipo do you have? could you send me a link to it? also what charger are you using. i appreciate it man!

[azntranceboi3131]

@paintballlpplayer45 Sorry no link to the battery, since it was given to me for testing purposes. The brand itself tho if i recall is RA tech, so is the charger. the voltage on the battery was 11.1v lipo

[paintballlpplayer45]

@azntranceboi3131 thanks man.

[NessSibe]

Can you tell me the brand of those magazines?

[azntranceboi3131]

@NessSibe MAG mags

[BriMan907]

Are you using the RA 11.1v nun-chuck or the mini? Or will either of them fit in the handguard?

[azntranceboi3131]

@BriMan907 both will work. i was using a 11.1v brick mini

[scamperscamper1]

Im thinking about putting a lipo in my kwa m4 which is pulling an m130 spring, systema long tightbore, systema bucking, everything else is stock, do you think a 11.1 lipo would be ok?

[roberto376]

@scamperscamper1 well you could do it with any generation, the 2010 ones would be best though. i mean, you're gun, even if stock, eventually will malfunction and reqire repair somehow. especially with that m130. using a lipo will boost performance, but just make a malfunction occur sooner. it's basically your call.

[Heheh274]

thats a nice KWA. I have a ACOG sight (1.5x), but its the real thing from Trijicon. Got it as a gift. Im running it on my Vltor style Systema m4a1.

[whysogrim]

Sounds like a sexy gun.

[Heheh274]

sexy but worth to much money. lol im almost to afraid of breaking it that i wont use it.

[azntranceboi3131]

haha ya the PTWs are VERY nice guns, and cost way toooo much! if i could i would buy one, however i'm just going to make due with the next best thing a KWA m4!

[Heheh274]

yeah the PTWs are way over priced. More expensive then the real thing lol.

KWA are still awsome.

[martinairsoft123]

if u want somethig like a ptw get the celcius CTW Its the exact same thing except only $600

[Heheh274]

@martinairsoft123 well i already have 3 PTWs and i a CTW. PTW is still more realistic and if you look at the CTW you will notice that it is of lower quality in a few important areas.

[martinairsoft123]

holy balls can i have one

[airsoftmaniac17]

i got the same shit all my friends get raped

[fronter6]

how to use all ur bbs fast???

hes doin it! ^^

[morati1963]

Awesome vid, 5 stars! I am just getting into this and my KWA M4 SR10 should be here in a couple of days. What brand of mid-cap did you use for this vid?

[pilerheritage]

Hey what's up Mitch.

Have you picked up an Sr5 yet?

[azntranceboi3131]

no need, this m4 is still kicking strong haha

[pilerheritage]

Hasn't had any problems??

Didn't you strip a piston at Desert Fox?

[azntranceboi3131]

nope

[DeltaWinters88]

Congrats to they guy who made this video, you are now a Kwa USA honorable mention video on Kwa USA forums! I'm the Kwa USA Forums Specialist, and hit me up, Wintersx866 or any of the other guys on there if you ever have any questions regarding your gun or would like to know about upcoming Kwa Products and advancements. Happy airsofting =D

[azntranceboi3131]

haha thanks! I know allizard from way back and well aware of all the up coming kwa products! i really want to get my hands on an mp7 right now! i'd love to do a video of that too.

[DeltaWinters88]

lolz alli xD

[MegaFragger]

oh you are going to kill your gun XD

[azntranceboi3131]

wrong, please read. use your eyes

[airsoftpunisher97]

its a 2GX gearbox by the way

[nathanial14]

kwa owns, im buying the sr10 for a christmas present to myself. xD

[airsoftpunisher97]

@nathanial14 nice i bought the km4 ris which is the ris version but with a crane stock.

[droned23]

the sr10 is a good buy i am getting the spring clipped for my local field and then a lipo and it will be shooting 35bps

[nathanial14]

@droned23 The sr10 should not be shooting 35bps with a lipo, more like 22-26. The only way you could get it up to 35 is if you put in a system turbo motor, and a m110 spring

[droned23]

the spring is clipped giving it a lower fps which gives it a higher ROF but my bad it will be around 30 with a lipo i had it tested at the store

[pilerheritage]

@droned23

it won't go over 30..

[droned23]

with a 12.4 it will

the spring is clipped so it boosts the rof and lowers the fps

[pilerheritage]

We all know that. You should explain how it works.

[DeltaWinters88]

Kwa 2GX gearbox is VERY VERY NICE!!!! My kwa SR12 is gettin 24 RPS on a stupid 9.6v 3800mah!!!!

[wyankeif1337]

Dayum... just ordered that one, w/ a 6.03 barrel and an 11.1. Getting hella pumped.

[Everything96]

My 9.6 2000mah isn't giving me that kind of rps with my 2GX. I thought mah didn't change rof? does it?

[DeltaWinters88]

No Mah doesn't change anything but lasting time of the battery. It is the amps that change the ROF. My battery is a 40 amp battery. Your 9.6v is maybe like a 25 or 30 amp battery. Hell you can have 25 Rps on a 1.2v battery if it has enough amps :D.

[DeltaWinters88]

That is why sometimes people get higher ROF on a 8.4v than a 9.6v battery. Its cause the ampage on their 8.4v is higher than the 9.6v battery.

[Everything96]

How do you know how many amps are on your battery?

[DeltaWinters88]

There should be a sticker on the side of your battery saying voltage, mah, and ampage. If there isn't that information, you can also go online find the battery that you purchased and read the info on there.

[droned23]

no

it doesnt

[Skillcapes3]

im definitly buying his gun

[azntranceboi3131]

if you cant afford bb's, you must be some poooooooooor SOB. please keep your useless comments to yourself.

[dallashamlin81]

DANG!!!! rof is crazy!!!

[hypersquirrel97655]

damn!!.even moreof a reason to buy a kwa

[Ranger0861]

Does anyone know of a mag that will fit the km4 ris.Except for the MAG brand and magpul. Please reply to me. thank you.

[azntranceboi3131]

many mags will fit the gun. its just a matter of finding the right one. Now, i used mag mags, but i will tell you that not all of them work. this is because of the plastic molds they used and sometimes too much plastic is injected into the molds. So, it is literally a matter of trial and error. now if you want hi caps TM,CA, KWA are 3 of the top mags you can buy, but i have used echo 1 mags before in mine!

[SCCrusaders]

100 round per 4.2 seconds (roughly).... Damn so thats (roughly) 25 round per second..... Holy fuck.

[DeltaAirsoft1]

Whats the discharge rate on your Li-Polly batteries?

[barbarianbob1221]

GO SOUTH LAKE LAGOON hahaha shit i live on the north side

[FullMetalOvercoat]

Like a lawnmower.

[Commissar492]

ya. i know. it shoots 20 rounds a second stock.

[weazle9844]

22 times two is only 44 so 44 bbs would come out in two seconds

[Airsoftsniping101]

um if your going by what your saying if its 2 and a half seconds thats only 55 rounds. If its 22 rounds a second then it should take 4 1/2 seconds

[uNtouchable1337]

You have got to be one dumb mother fuckers.

Say its at 20, 20x5=100, was that hard?

IT takes roughly 5-6 seconds.

Which means its anywhere from 15-20 a sec, there are many variables.

[atomiclemons666]

u shouldnt shoot ur gun lik that

[dirt657]

dude its a test, and its lipo ready

[paintballers]

Did you read it says it is a test retard

[xxweeman16]

holy shit =O

[SCCrusaders]

5 stars... Nice gun. Im going to be getting KWA's new line of guns comming out september 19th (i think) and what kind of lip did u get?

[azntranceboi3131]

i have an older red alert lipo battery

[MadAirsofterMatt]

haha awsome that means mine is 2g also i got it yesturday lololol

[bigbirdcrap]

hahahah i got my KWA 2G a week or two ago it's BEAST

5/5 nice vid

[timoulete76]

I order cyclone dual sector gear with lipo 11.1 and Mosfet in VFC scar. I post when it's ready O_O

High rof setting héhé

[SwissStallion51]

what is lipo?

[azntranceboi3131]

google is your friend......

[azntranceboi3131]

i have no idea what you are talking about. what would work with the m4.

[azntranceboi3131]

um..... of course it works? i did post of video of me shooting it......i would check your local airsoft retailer