Thanks for the video, good instructions. We were having problems with soapy water spraying out without foaming. We discovered that the screen kept falling out of place. We heated up the tank neck where it connects to the screen, and used pressure to try and shrink it down a little. Now the screen stays in place and it works beautifully!
What should I do if it doesn't start? I did everything on the video on how to install it and everything in here but when I turn on it just didn't do anything.
@travistarpy I already call customer service and all it needed was to adjust the shampoo tank it was a little loose. Thank you anyway, and thanks for all this videos
Anyone have any idea why my level of extraction is declining? I replaced the brush with a new one thinking that the bristle tips weren't contacting the "scrape off" area of the pickup tray but it's barely removing any foam.
I used to sell these and would do 3-4 demos a day and recall very well how much it's supposed to extract.
Any tips would be appreciated.
Again: It dispenses well but removes only a little trickle. Yes the carpet is vacuumed and shampooer is clean before starting.
@travistarpy ive had the kirby for a while, but never used it. now that i am using i wanna empty out the bag full of dirt, but im confused, am i suppose to empty it or replace it with a new bag? because mine didnt come with extra bags.. help please?
You should actually dispense the soap, then turn off the soap dispenser and go over it that way for a bit to pick up dirty foam. Then you wait and go over it with the vacuum later.
I used to sell the Sentria so I know how to use the shampooer, but I'm buying an ultimate G tomorrow, do you know if all the attachments and the shampooer are operated the same way? I haven't had a chance to look at the Ultimate G yet.
Thanks for help sure bet my wife be happy now lol
nightwolf25m 1 week ago
Since the Kirby shampoo is a little costly, could I use anything else? Could I use a small amount of Mr Clean or Pine Sol?
ilostmysocks1025 4 weeks ago
@ilostmysocks1025 Absolutely not.
Kirby uses DRY FOAM shampoo.
This system is designed to apply suds, let them dry, then vacuum up the residue.
travistarpy 4 weeks ago
Awesome instructions. Simple and to the point. Lost my book, wouldn't have been able to do it without your vid.
ValiciousV 2 months ago
Thanks for the video, good instructions. We were having problems with soapy water spraying out without foaming. We discovered that the screen kept falling out of place. We heated up the tank neck where it connects to the screen, and used pressure to try and shrink it down a little. Now the screen stays in place and it works beautifully!
sacapuntas26 3 months ago
i work for kirby n trust me these machines work
Elcarlillos100 4 months ago
Thank you so much - the written directions were too confusing to follow. Your video instructions made my day!
mjoanc 4 months ago
@ifistpump8 Kirby Dry foam shampoo.
travistarpy 5 months ago
Thanks so much for posting! My kirby "schooling" was pathetic, so this was very handy!
tiffswishsweets29 5 months ago
What should I do if it doesn't start? I did everything on the video on how to install it and everything in here but when I turn on it just didn't do anything.
GreenButtercup1 5 months ago
@GreenButtercup1 Give me a call and i can help you out.
Thanks,
Clarksville Vacuum
(931) 320-9192
travistarpy 5 months ago
@travistarpy I already call customer service and all it needed was to adjust the shampoo tank it was a little loose. Thank you anyway, and thanks for all this videos
GreenButtercup1 5 months ago
very helpful! thank you!
marinesgirl1989 5 months ago
you just made my life.
anjdoyle 6 months ago
Thanks I guess I've been doing it wrong the whole time
JCUSAF23 7 months ago
i used to do demos - ive seen these things work friggen miracles on carpet. wouldn't own anything but a kirby!
BriZzNiTcH 8 months ago
Thank you!
NavyOneKC 9 months ago
very helpful!
ShunshunRikka89 11 months ago
This is great, had a rough idea on how to use the shampooer, but with no instructions, iI really didn't want to mess up, many thanks :)
stardustfrenzy 1 year ago
These tutorials are fantastic ! Thanks.
wickedandscary 1 year ago
Anyone have any idea why my level of extraction is declining? I replaced the brush with a new one thinking that the bristle tips weren't contacting the "scrape off" area of the pickup tray but it's barely removing any foam.
I used to sell these and would do 3-4 demos a day and recall very well how much it's supposed to extract.
Any tips would be appreciated.
Again: It dispenses well but removes only a little trickle. Yes the carpet is vacuumed and shampooer is clean before starting.
Pinckney12 1 year ago
@Pinckney12 I would make sure those two plastic strips are still attached to the bottom of your suds tray.
travistarpy 1 year ago
@travistarpy ive had the kirby for a while, but never used it. now that i am using i wanna empty out the bag full of dirt, but im confused, am i suppose to empty it or replace it with a new bag? because mine didnt come with extra bags.. help please?
twistedferrets 8 months ago
@twistedferrets You need to replace the bag.
Go to ebay and buy some replacement bags.
You are using an inner bag correct?
travistarpy 5 months ago
Awesome, thank you.
illrossi 1 year ago
i love these tutorials! So much better then the dvd mine came with. much more helpful with a lot more tips!
hmc166 1 year ago
Thank you!
kmcvey33 1 year ago
i love your accent nd you are very cute!
vacuumboy2 1 year ago
You should actually dispense the soap, then turn off the soap dispenser and go over it that way for a bit to pick up dirty foam. Then you wait and go over it with the vacuum later.
Pinckney12 1 year ago
I used to sell the Sentria so I know how to use the shampooer, but I'm buying an ultimate G tomorrow, do you know if all the attachments and the shampooer are operated the same way? I haven't had a chance to look at the Ultimate G yet.
dankrockers 1 year ago
man that carpet looks brand new!
MRSSCARE14 1 year ago
thanks for the help. :)
memonster1989 1 year ago
Thanks for your help!
sheltona1 1 year ago
Super helpful. Thank you.
AKTraci 1 year ago
thanx
JustLookin4TheTruth 1 year ago