Free energy has been here all along ,But the coverup is very strong,Go to LT-MAGNET-MOTORdotCOM and get the blueprints for a genuine magnet motor ,Be part of the revolution!
(gmm)/(r)^2 the only way around it to turn into a photon, oh wait when you get near a black hole even a photon has a mass. sorry, operator error, you suck big time
what i see is a "magnet" spinning on an axle , OK....but the "glow" is just a reflection of the light on a glass panel close to the magnet, so its a fake!
can i just say something for the record.......... I always see all kinds of videos of people doing great experiments, but it seems like nobody knows the first thing about working with their camera. all the videos are always really shaky, blurry, or the camera is poorly positioned. if you're gonna' shoot a video then do everyone a favor and put at least a little effort into making a descent video.
I'll give you the keys to the kingdom. Was working with a hand held dremel motor at first for its high rpm. Spinning aluminum discs attached to an 1/8th inch diameter wood shaft, within very close proximity to 2 stationary ceramic magnets (1100 gause field strength), one magnet above the disc and one magnet below the disc(s) with attractive magnetic alignment, would consistently get a 32% increase in rpm after about 10 min. of spin, with no added energy input.
I believe this is do to the spin alignment of the aluminium nuclei adding coherent nuclear spin to the overall structure. Aluminum has an unpaired nucleon which adds is angular momentum to its nucleus. However, a 1/8 inch diameter wood shaft is not very strong. So, went to a Rip or Zip motor with larger diameter shuck (1/4 inch). They're generally sold in proximity to the dremel units.
Apparently, more coherent nuclear energy is externalized than just angular momentum (or the altered inertia of the discs or magnets) hence the field glow. The race is on for who can build their first flying-saucer. ;->
The high speed motor is attached to a stable frame and is about 1 1/2 feet from magnets. I wanted the motor circuit as far from the magnets as I could get and still have a stable spinning shaft.
I'm of the opinion torsion or vortex magnetic fields are responsible for inertia or gravity fields. Really I don't drink. Should have posted video without sound. There are 3 ring ceramic magnets (800-900 gauss field strength) attached to aluminum shaft about 5 mm apart. Spinning magnets produces intermittent field glow. Was telling friends about it and they suggested video taping it. Looking at working with larger apparatus.
Inital rotation speed - 3900 rpm. After 5 minutes the 3 magnets rapidly spun up to 8900 rpm with no added energy input and had the feeling motor drag was preventing an even faster speed acceleration.
Research Aspden Effect. Remember too that you are producing eddy currents in your discs but the electricity has no where to go so the voltage builds and ionizes the surround air. Nice experiments. You may want to research 'Faraday Disc' as well since your experiments are nearly the same. De Palma put his discs and magnets on the same shaft and produced energy proving that the field does not rotate with the magnets.
@AdminOnDuty actually you cant prove that the field doesnt rotate with the magnet as the wire that is recieving the current doesnt rotate with the magnet.
the perfect spacecraft has 'no' moving parts, I will say this to the world until I am blue in the face.
onthecuttingedge2005 7 months ago
misleading title
pseudo science
poor
80sMeavyHetal 9 months ago
this video would have more credibility if it were more than 20 seconds long and higher resolution.
chuckfist 1 year ago
This has been flagged as spam show
Free energy has been here all along ,But the coverup is very strong,Go to LT-MAGNET-MOTORdotCOM and get the blueprints for a genuine magnet motor ,Be part of the revolution!
porscheghcje 1 year ago
(gmm)/(r)^2 the only way around it to turn into a photon, oh wait when you get near a black hole even a photon has a mass. sorry, operator error, you suck big time
arbighookasian 1 year ago
in the UK we have trained professionals to help with your problem. and medication to aleviate the symptoms
jenkem23 2 years ago
F*** that waste of time
CSavage321 2 years ago
eE€???
0903390901 2 years ago
what i see is a "magnet" spinning on an axle , OK....but the "glow" is just a reflection of the light on a glass panel close to the magnet, so its a fake!
nfexp 3 years ago
can't really see what is happening
thegreatkoua 3 years ago
can i just say something for the record.......... I always see all kinds of videos of people doing great experiments, but it seems like nobody knows the first thing about working with their camera. all the videos are always really shaky, blurry, or the camera is poorly positioned. if you're gonna' shoot a video then do everyone a favor and put at least a little effort into making a descent video.
pitchaxis9 3 years ago 19
I didn't understand what this video depicts. I see a spinning disk with fins (can't easily be seen) on it. How's that anti-gravity?
UnderMan1965 3 years ago
this is the light that we see in ufos which move by spining magnets
antonKASA2007 4 years ago 2
youtuub -
I'll give you the keys to the kingdom. Was working with a hand held dremel motor at first for its high rpm. Spinning aluminum discs attached to an 1/8th inch diameter wood shaft, within very close proximity to 2 stationary ceramic magnets (1100 gause field strength), one magnet above the disc and one magnet below the disc(s) with attractive magnetic alignment, would consistently get a 32% increase in rpm after about 10 min. of spin, with no added energy input.
dsands51 4 years ago
I believe this is do to the spin alignment of the aluminium nuclei adding coherent nuclear spin to the overall structure. Aluminum has an unpaired nucleon which adds is angular momentum to its nucleus. However, a 1/8 inch diameter wood shaft is not very strong. So, went to a Rip or Zip motor with larger diameter shuck (1/4 inch). They're generally sold in proximity to the dremel units.
dsands51 4 years ago
Apparently, more coherent nuclear energy is externalized than just angular momentum (or the altered inertia of the discs or magnets) hence the field glow. The race is on for who can build their first flying-saucer. ;->
dsands51 4 years ago
The high speed motor is attached to a stable frame and is about 1 1/2 feet from magnets. I wanted the motor circuit as far from the magnets as I could get and still have a stable spinning shaft.
dsands51 4 years ago
adds its angular
dsands51 4 years ago
Sorry, nazis beat you to the flying disc tech. Anunaki beat the nazis to it by at least 12k years. ;-)
3190423 3 years ago 4
Can you please show a clip of the motor while it's stopped so we can actually see what it consist of.
Thanks
youtuubbguy66 4 years ago
Omega -
I'm of the opinion torsion or vortex magnetic fields are responsible for inertia or gravity fields. Really I don't drink. Should have posted video without sound. There are 3 ring ceramic magnets (800-900 gauss field strength) attached to aluminum shaft about 5 mm apart. Spinning magnets produces intermittent field glow. Was telling friends about it and they suggested video taping it. Looking at working with larger apparatus.
dsands51 4 years ago
Can you plz explain in detail whats going on here?
The sound is not clear.
OmegaThe1 4 years ago
Inital rotation speed - 3900 rpm. After 5 minutes the 3 magnets rapidly spun up to 8900 rpm with no added energy input and had the feeling motor drag was preventing an even faster speed acceleration.
dsands51 4 years ago
Research Aspden Effect. Remember too that you are producing eddy currents in your discs but the electricity has no where to go so the voltage builds and ionizes the surround air. Nice experiments. You may want to research 'Faraday Disc' as well since your experiments are nearly the same. De Palma put his discs and magnets on the same shaft and produced energy proving that the field does not rotate with the magnets.
AdminOnDuty 3 years ago
@AdminOnDuty actually you cant prove that the field doesnt rotate with the magnet as the wire that is recieving the current doesnt rotate with the magnet.
ollieoniel 1 year ago